1 qt. Spanish Cafe Concentrated Semi-Transparent Water Based Interior/Exterior Concrete Stain

Hi, thanks for your question! Our 1 qt of Spanish Cafe covers 600-700 sq. ft. with one coat depending on the surface and application method.

Though this can be done it is not recommended as we cannot ensure the color that you envision. If this is something you would like to do please wait at least 30 min in between applications to properly apply.

Hi! Based on your description, this is commonly caused by calcium deposits (efflorescence) or trapped moisture beneath the sealer. Moisture can sometimes migrate up through the concrete, especially near surrounding planters, irrigation, or other moisture sources, causing the sealer to appear white when dry and return to normal when wet. We’d be happy to help diagnose the issue and walk you through the proper repair process. Our technical support line is available 24/7, or you can email us with a few photos of the affected area. We’ll help determine the cause and provide the best solution to get your patio looking great again.

Thank you for your interest in our Spanish Cafe Concrete Stain. This product is a semi-transparent, water-based concrete stain designed for porous concrete, masonry, and similar cementitious surfaces. Because brick can vary significantly in porosity and may have existing sealers, coatings, or efflorescence, we recommend testing a small inconspicuous area first to confirm adhesion and the final color. On properly prepared, unsealed brick, the semi-transparent finish may allow some of the natural color variation and texture of the brick to remain visible rather than creating a solid painted appearance. Please note that the final color will be influenced by the existing reddish, pink, and white tones in the brick, so results may vary from the color shown on the container. For the most even and durable result, the brick should be clean, dry, and free of any previous sealer, paint, or water-repellent coating before application.

Hello, Thank you for your interest in our Sunset Concentrated Semi-Transparent Water-Based Concrete Stain. This product is designed to penetrate and color porous concrete surfaces. It is not recommended for application over painted or sealed patio surfaces, as the stain cannot properly penetrate through existing paint or coatings. For best results, the surface should be clean, porous, and free of paint, sealers, coatings, or other materials that may prevent absorption. If the patio is currently painted, the paint would need to be completely removed and the concrete properly prepared before applying the stain. If you can provide additional details about your patio surface and the type of coating currently on it, we would be happy to offer further guidance.

Hi, thanks for your question! We don't recommend using a roller for stains. Spraying is one of the best ways for an even coverage. Anything with a cone tip; no fan tips as they leave streak marks. We also recommend using any soft bristle broom or brush. Each application gives a different finish. Remember to do a test area first.

Hello, Thank you for your interest in our Spanish Cafe Concrete Stain. Because your concrete surface has already been coated with a solid-color concrete porch paint, the stain will not perform the same way as it would on bare, unpainted concrete. Concrete stains are designed to penetrate into porous concrete surfaces, while painted surfaces block penetration. Applying the stain directly over the painted surface may result in poor absorption, uneven color, or adhesion issues. For best results, the existing porch paint would need to be completely removed so the stain can penetrate the concrete properly. After paint removal, the surface should be thoroughly cleaned and allowed to dry before applying the stain. If removing the paint is not something you want to do, a concrete paint or coating product may be a better option than a penetrating stain for your project.