Model # LW YELLOW A_8

Internet #207135207

Clopay EZ-Set Torsion Conversion Kit for 8 ft. x 7 ft. Garage Doors 134 lbs. - 155 lbs.
0092134032903

Clopay

EZ-Set Torsion Conversion Kit for 8 ft. x 7 ft. Garage Doors 134 lbs. - 155 lbs.

  • Converts your torsion spring system into an easier installation
  • Not available for use on stock wind-load doors
  • OEM part
$11100 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Converts your torsion spring system into an easier installation
  • Not available for use on stock wind-load doors
  • OEM part
What was once a job exclusively for trained garage door professionals, Clopay's EZ-SET Torsion Spring System makes torsion spring installation faster and easier for the do-it-yourselfer. This OEM spring replacement system eliminates the difficult and dangerous manual winding process. There is no need to locate and prepare the center mounting pad with this system.
  • Kit for door size: 8 ft. x 7 ft.
  • Kit includes: EZ-set torsion spring, torsion tube and coupler, drums, cable assembly, EZ-set winding unit, EZ-set end bearing, mounting brackets, fasteners and instructions
  • Works on 7 ft. H door with standard lift 2 in. track and 12 in. radius horizontal track, do not use on doors with LHR track or doors using the double track LHR conversion kit
  • Headroom required for this kit is 12 in.

Product Overview

  • Converts your torsion spring system into an easier installation
  • Not available for use on stock wind-load doors
  • OEM part
Model #: LW YELLOW A_8
Internet #: 207135207

What was once a job exclusively for trained garage door professionals, Clopay's EZ-SET Torsion Spring System makes torsion spring installation faster and easier for the do-it-yourselfer. This OEM spring replacement system eliminates the difficult and dangerous manual winding process. There is no need to locate and prepare the center mounting pad with this system.

  • Kit for door size: 8 ft. x 7 ft.
  • Kit includes: EZ-set torsion spring, torsion tube and coupler, drums, cable assembly, EZ-set winding unit, EZ-set end bearing, mounting brackets, fasteners and instructions
  • Works on 7 ft. H door with standard lift 2 in. track and 12 in. radius horizontal track, do not use on doors with LHR track or doors using the double track LHR conversion kit
  • Headroom required for this kit is 12 in.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Details

Garage Door Part/Accessory Type
Garage Door Conversion Kit
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
n/a

Specifications

Details

Garage Door Part/Accessory Type
Garage Door Conversion Kit
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
n/a

Questions & Answers

I am installing a 2 8x7 Clopay insulated doors that weigh 89 pounds. Will this system be too much for the door?

https://www.homedepot.com/p/Clopay-Value-Plus-Series-8-ft-x-7-ft-6-3-R-Value-Insulated-White-Garage-Door-HDS/100083256
Asked by: Diyguy727
Yes. It will be too much torsion after setting up spring. Garage door will be damaged when attempting to close. The door material cannot withstand the amount of bending created between the center of the door and the outside edges of the door due to too great a force from the garage door opener attempting to overcome the force created from the torsion spring.
Answered by: joal
Date published: 2017-11-30

I ordered this conversion kit. I received one box containing just the spring and two brackets. ...

I ordered this conversion kit. I received one box containing just the spring and two brackets. No other parts or instructions. Is this kit normally shipped in two or more boxes? If so I did not get a complete order. Please advise and how can I get this resolved?
Asked by: Joe
I received the entire package in one box.
Answered by: Pheeson
Date published: 2017-07-12

Will this kit work on my new 8 x 7 HDS door with 12" radius track where I installed National quic...

Will this kit work on my new 8 x 7 HDS door with 12" radius track where I installed National quick turn top rollers to accommodate limited headroom clearance issue? I have 10" clear headroom from top of door to ceiling. Installation manual - Table 3'B/ Low Headroom Options only indicates reduced headroom clearance from 12' to 8" for quick turn bracket for extension springs - nothing shown for EZ-SET torsion with quick turn on standard track. I had a similar installation installed on the garage bay next to this one years ago which has torsion bar and quick turn top rollers. It works fine .. tight installation, but no problems. Also ... how much does an 8 x 7 HDS insulated door weigh so I can match it to the correct conversion kit weight?
Asked by: retiredconstructionguy
retiredconstructionguy, The door weight on the 8x7 HDS is 135 lbs. so this kit will work on your door. As for headroom, we recommend a minimum of 9 1/2" for EZ Set Torsion Spring System. Based on your measurement of 10" it looks like it will fit. Thanks for shopping The Home Depot, The Clopay Team
Answered by: Clopay Customer Care
Date published: 2017-09-19

Can someone install this for me? and what is the cost?

Can someone install this for me? and what is the cost?
Asked by: Lucy
Lucy, Yes we offer installation services. Please visit www.homedepot.com/garagedoors to view installation rates in your area. You can design, visualize, and buy your installed Clopay Garage Door through this secure site. Thanks, The Clopay Team
Answered by: Clopay Customer Care
Date published: 2017-07-06
  • y_2017, m_12, d_11, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_207135207, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 99ms
  • QUESTIONS, PRODUCT

Customer Reviews

EZ-Set Torsion Conversion Kit for 8 ft. x 7 ft. Garage Doors 134 lbs. - 155 lbs. is rated 3.7 out of 5 by 7.
Rated 2 out of 5 by from The 3 piece torsion bar is the problem. It flexes... The 3 piece torsion bar is the problem. It flexes and the spring hits the door header I will have to make a support bracket to help reduce The flexing. The manufacturer includes it for larger doors but not an 8 ft door Poor choice on the manufacturer. Other than that it was easy to set up and adjust appears To work well.
Date published: 2017-07-19
Rated 3 out of 5 by from Product overall is good. However, the torsion spring rate supplied was too high for my aluminum ... Product overall is good. However, the torsion spring rate supplied was too high for my aluminum 73lb door. The installation instructions could have been better written as some of the terminology was not appropriate or too many caveats/warnings that were not appropriately placed. Because the spring rate was too high, the drive motor tended to bend my top panel as it approached full closing and stalled. (Increasing the motor downward force would damaged my door.) As a result, I have removed the system completely as the opener works perfectly well lifting and closing the door without any spring assist. I will reinstall my old extension springs and use this system on another garage door that is made of wood and much heavier.
Date published: 2017-07-12
Rated 4 out of 5 by from Quite easy to install, the only issue was connecting the... Quite easy to install, the only issue was connecting the shafts together, the self tapping screw would not secure the bars, so I drilled through both sides and secured them with stainless not and bolts. Getting the required turns on the spring was very easy with a portable drill and the enclosed 1/4" hex adapter.
Date published: 2017-07-25
Rated 4 out of 5 by from Retro installed on new Clopay 8 x 7 insul door.... Retro installed on new Clopay 8 x 7 insul door. Appears to be a good product ..only been in use one week. For install ABSOLUTELY watch the video .. written instructions unclear. 3 pc head rail needs through bolts, not metal screws to join them. Buy center support bracket for head rail.
Date published: 2017-10-10
Rated 5 out of 5 by from Great conversion kit for the DIY. Very easy and quick installation with several youtube video's d... Great conversion kit for the DIY. Very easy and quick installation with several youtube video's demonstrating, highly recommend!
Date published: 2017-07-18
Rated 4 out of 5 by from Good product easy to install except. It was a good product and very easy to follow instructions except the screws that connect the coupler to the rods are a joke. I used the drill bit the size it stated then the screw would either spin or the head broke off. I just drilled all the way through and put my own nut and bolt in it save the trouble later when they break and trust me they will.
Date published: 2017-05-02
Rated 4 out of 5 by from Easy install and safe if you follow instructions This was an easy install to replace existing torsion bar. This kind of job is usually not a do it yourself since it can be dangerous, but as long as you follow the instructions in is easy and safe.
Date published: 2017-05-23
  • y_2017, m_12, d_11, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_, sid_207135207, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 105ms
  • REVIEWS, PRODUCT