Hi Jaki, We do not offer this door as "sections only" due to it voiding the warranty if the new track, springs, hardware are not installed on the door. Thanks for shopping the Home Depot, the Clopay team
Hi Corey, The headroom needed for this door is approx. 12 and it measured above the opening (bottom of the header to the ceiling or first obstruction and the distance must be maintained at least 9' back into the garage. You can visit www.homedepot.com/garagedoors and enter your zipcode and go to the size tab and scroll to the bottom for a "how to measure" diagram. Thanks for shopping the Home Depot, the Clopay team
Hi Bratiblond, yes you can get this door in a 9' width. Please visit www.homedepot.com/garagedoors and enter your zipcode to start. From here you can design the door and size you like and view both DIY and professional install options. Thanks for shopping the Home Depot, the Clopay team
BT, you can view the full selection of doors available in these sizes by visiting www.homedepot.com/garagedoors. You will need to enter your zip code, select your local store, select Residential, and then use the Know Your Door Size section to enter the door size. Thanks for shopping The Home Depot, The Clopay Team
Hi Cltmomof5, Yes the windows grids can be replaced. Please visit your local Home Depot store or contact Clopay directly at 877-526-2050 for information. Thanks for shopping the Home Depot, the Clopay team
DavidinCM, please contact us at 1-877-526-2050 to discuss the door weights. As for the steel gauge, both doors feature 27 ga steel on the exterior and interior surfaces. We will also have our team look into the specs on the website and make any corrections. Thanks for shopping The Home Depot, The Clopay Team
Hi Renee, If you purchase a door with the professional installation option a certified installer will do a site check to verify all measurements prior to the product being put into production. This is included in the installed price of the door and offers piece of mind knowing that everything will be correct. Thanks for shopping the Home Depot, the Clopay team.
Hi RH, Yes Clopay does offer compatible entry doors. Please contact our Solution Center at 877-526-2050 for information/pricing on Entry Doors. You can also visit www.clopaydoor.com/entry-door to view the entire collection of entry doors available. Thanks for shopping the Home Depot, the Clopay team
Jude, yes you can purchase just the top section. You will need to contact your local Home Depot and work with a Millwork Associate to place the order. You will need the serial number or original PO number if purchased from Home Depot to ensure you get the correct top section for your existing door. Thanks for shopping The Home Depot, The Clopay Team
Kac, you will need a min of 12 inches of headroom 9' back from the opening to allow room for standard track. Based upon your measurements from your question, you should allow for a rough opening of 16' x 9', the same size as the door. The finish trim will go around the opening to provide a seal around the door. You can visit www.homedepot.com/garagedoors, enter your zip code, and make your size and product selection. It will also ask whether you want the door D.I.Y. or installed. Your answer to these questions will determine your retail price Thank you for shopping The Home Depot, The Clopay Team.