Durable steel construction with white epoxy finish
Compatible with ShelfTrack Closet Systems
Can be mounted to wall studs, concrete, and drywall
Product Details
The ClosetMaid ShelfTrack White 24 in. Hang Track is exclusively designed for the ShelfTrack standard and bracket system and is designed to help insure level shelving surfaces. Start installation by securing the hang track directly to wall studs, concrete and drywall. Add ShelfTrack standards and brackets. Complete installation with ventilated wire shelving to fit your needs.
Epoxy-coated steel construction insures strength
Available in various lengths
Makes leveling your storage system easy
Combine with other ShelfTrack accessories (sold separately)
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
Specifications
Questions & Answers
57Questions
Q:Hi what is the size of track from inside? Meaning the gap size? Is it 1 inch or more?
I am actually planning to use this as track for 1inch sliding doors.
by|Jan 20, 2023
2 Answers
Answer This Question
A:Â No, it is approx 3/4". The gap is just wide enough for the standard to fit into. Standards are 1"wide, but the depth of the standard is less than 1". The website does not provide that specification. You could measure in the store. Mine are fastened securely to the wall, so hard to get exact measurment.
by|Jan 27, 2023
A:Â Good Afternoon,
Unfortunately we can not recommend using the hang track for sliding doors. Thank you for your inquiry.
by|Jan 20, 2023
Q:Are Closetmaid 2812 Shelftrack compatible with Knape and Vogt 82 or 182 brackets?
by|Jan 7, 2023
1 Answer
Answer This Question
A:Â Good Morning, Unfortunately no, our shelving is not compatible with another companies brackets. Thank you for your inquiry.
by|Jan 9, 2023
Q:My closet width is 91 inches. Can I center the 80 inch hanging bracket and let the cloths pole hang off about 5 inches on each end?
by|Oct 28, 2022
3 Answers
Answer This Question
A:Â Good Morning,
You should only have 2 inches on each end. The pole can be cut easily with a hacksaw. Thank you for your inquiry.
by|Oct 28, 2022
A: Yes, I believe so. There should be no longer than 6 inches overhang on each side. It’s in the directions.Â
by|Nov 4, 2022
A: It’s hard to answer this question without more information.  The hanging bracket provides a anchor for the shelf strips that hold the brackets and eventually the shelf and clothes rod.  The key would be having lots of shelf strips which provides solid support for brackets, shelf and clothes rod   I will warn you that holes in hanging bracket very seldom lined up with 2x4 in wall.  I usually drill extra holes to match studs.  Very important to place screw support on all items in studs. Â
by|Oct 30, 2022
Q:can we get it cut in store
by|Aug 28, 2022
1 Answer
Answer This Question
A:Â Good Morning,
Please check with your local Home Depot on this matter. Thank you for your inquiry.
by|Jan 28, 2023
2 found this answer helpful
Showing 1-4 of 57
Customer Reviews
4.8 out of 5
(829)
4.8
out of 829 reviews
98%recommend this product
5664
4127
319
29
110
Filter by:
Showing 1-10 of 829 reviews
Mar 18, 2021
It was very easy to assemble. It worked out great,...
It was very easy to assemble. It worked out great, and looks fantastic! A true space saver!
by
Verified Purchase
Nov 12, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
May 30, 2020
It enabled me to work with an unusual space. Very pleased with the results!
It enabled me to work with an unusual space. Very pleased with the results!
by
Verified Purchase
Recommended
1 found this review helpful
May 12, 2020
This product is similar to older wire shelving with one big exception. This version includes a h...
This product is similar to older wire shelving with one big exception. This version includes a horizontal bar that the vertical members can lock onto at the top. Whether you are able to mount that bar directly into studs or not, it really helps keep the system sturdy. In my case, I had an old wall with irregularly spaced studs that did not lend itself to screwing into studs. I decided to not create new screw holes in the horizontal bar and just used the many available holes with drywall fasteners. The pre-drilled holes are set to accommodate 16" and 24" stud centers. On a 40": bar there were five available. One was set into a stud and the others were attached through the drywall. Using good quality drywall fasteners gave me a couple hundred pounds of safe hanging strength. The vertical bars (just 12" for this application) were placed with drywall fasteners as well and the whole system was up in less than half an hour. A single shelf was placed near the bottom of the verticals to hold a wire, compartmented storage rack that my wife purchased to hold various kitchen utensils and appliances. And, yes, those are small paint cups in the picture. My wife found that they work for 'other' uses. So I have to hide the ones I want to keep for paint!
The horizontal bar gives you much more flexibility in where you can place your uprights, even when strength is the prime consideration.
by
Verified Purchase
Recommended
3 found this review helpful
May 5, 2020
Using the top hanging bracket on the shelf track system makes it much easier to install the track...
Using the top hanging bracket on the shelf track system makes it much easier to install the tracks themselves. Once the top bracket is installed, it hold the vertical tracks in position so you can center them over the studs and drill them into place easily.
by
Verified Purchase
Recommended
Jan 15, 2020
Strong and fairly easy to install. This track holds the vertical shelf tracks for the ClosetMaid ...
Strong and fairly easy to install. This track holds the vertical shelf tracks for the ClosetMaid system. I have used it in two closets and it helps ensure the shelves and all do not come falling down on you. The screw holes are every eight inches and you can drill new ones if needed. It is important to get this track bar in the studs, or at least a few studs for maximum hold and sturdiness.
I cut this to size with a hack saw and drilled a few extra 7/32" holes with cobalt bits. It is fairly light so holding it during installation is not too bad.
by
DIY
Recommended
Nov 19, 2019
The Closetmaid 24 inch track I put it on a bathroom wall with 2, 12 inch ClosetMaid shelves. I ...
The Closetmaid 24 inch track I put it on a bathroom wall with 2, 12 inch ClosetMaid shelves. I screwed all in to the wooden studs that I installed behind the wallboard. There is no way this is going to pull out of the wall. That is a ClosetMaid basket hanging off the lower shelf, that can be purchased at HD in the same aisle as the ClosetMaid shelves.
by
Verified Purchase
Recommended
1 found this review helpful
Oct 29, 2019
Won’t pull out of wall...
Won’t pull out of wall
by
Verified Purchase
1 found this review helpful
Sep 10, 2019
Sturdy. And easy to use ...
Sturdy. And easy to use
by
Verified Purchase
Aug 7, 2019
Simple to Install. I had to buy this extra 2 foot section since the 5 foot piece wasn't long eno...
Simple to Install. I had to buy this extra 2 foot section since the 5 foot piece wasn't long enough for the 8 foot shelves. I always secure vertical supports by using 3 inch long drywall screws into wall studs. This provides strong attachment to support weight on cantilever shelves.
68 in. White Single Track Upright for Wood or Wire Shelving
The Rubbermaid 68 in. Single Track UprightThe Rubbermaid 68 in. Single Track Upright mounts to your wall with wood screws. The durable metal body is treated with a professional laminate finish that resists scratches. Works in combination with all Rubbermaid Single Track components.View Full Product Description
70 in. Black Twin Track Upright for Wood or Wire Shelving
This twin track upright helps meet heavyThis twin track upright helps meet heavy duty shelving needs when used together with Rubbermaid adjustable brackets and wood shelving. An epoxy paint coating resists chipping, peeling and yellowing over time to offer lasting beauty and performance. Can be used with any 9 in. or 12 in. deep wood shelves.View Full Product Description
ShelfTrack 80 in. Nickel Hang Track
The ClosetMaid ShelfTrack Nickel 80 in. HangThe ClosetMaid ShelfTrack Nickel 80 in. Hang Track is exclusively designed for the ShelfTrack standard and bracket system and is designed to help insure level shelving surfaces. Start installation by securing the hang track directly to wall studs, concrete and drywall. Add ShelfTrack standards and brackets. Complete installation with ventilated wire shelving to fit your needs.View Full Product Description
ShelfTrack 84 in. x 1 in. White Standard
ClosetMaid designed this bracket exclusivelyClosetMaid designed this bracket exclusively for the ShelfTrack hang track and bracket system, which allows wire shelves to be adjusted to any height. The system creates a versatile storage solution, great for both your large and small spaces. Durable metal construction and double-slotted design provide strength and durability. Standard brackets need to be placed no more than 24 in. apart and 4 in. from the end of a shelf for the utmost stability.View Full Product Description