Unleash your inner craftsman and build beautiful hardwood-faced creations with this PureBond Red Oak Plywood Project Panel from Columbia Forest Products. Harvested in a sustainable manner from a domestic forest, the red oak timber used for the decorative veneer is rotary-cut to exacting standards for an exquisite hardwood appearance that works splendidly on any furniture or cabinetry piece. This 1/4 in. x 2 ft. x 4 ft. panel is comprised of 100% natural wood and assembled with a soy-based, formaldehyde-free PureBond technology that won't subject interior environs to any toxic off-gassing, as UF-constructed panels are susceptible to do. The yellow poplar core substrate is layered in alternating cross bands with the red oak veneers, augmenting the rigidity, strength and flatness you expect from hardwood for lasting durability and enduring beauty. This 3-ply decorative plywood is a cost-competitive alternative to formaldehyde-laden panels and won't degrade the air quality of your home or business over time.
3-ply project panel is assembled with a smooth, patch-free red oak face veneer applied to only the face side of this panel; the back of the panel is not intended to be exposed
PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
Decorative top veneer, measuring approximately 1/42" thick, exhibits the beauty and timeless quality of natural hardwood and is suitable for painting or staining
Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
Common: 1/4 in. x 2 ft. x 4 ft.; actual: 0.203 in. x 24 in. x 48 in.
Direction of the grain is the length of panel
Each panel weighs approximately 6 lbs.
Grade: B-4 - see grading guide for additional information
Available in additional species- Alder, Cherry, Cedar, Hickory, Maple, Mahogany, Poplar, Walnut, and White Oak
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
Specifications
Questions & Answers
51Questions
Q:what is the core
by|Jan 23, 2023
1 Answer
Answer This Question
A:Â Hello,
Really depends on what part of the country you are in. In the West it is Fir in the east it is Poplar. It is an all-wood core.
by|Jan 24, 2023
Q:can these be cut to use as stair risers ? Can they be painted?
by|Dec 31, 2022
3 Answers
Answer This Question
A:Â Hello,
Yes, this panel could be used for that application, and you can paint it.
by|Jan 1, 2023
A:Â Stair risers? I advise not. This is not what I would call structural grade plywood. It is fine for light duty projects, but the core of the board is a softer wood than the surface veneer of oak. I was able to cut up mine by scoring ea side with a simple box cutter & snapping it. And any wood can be painted, but light stain &/or clear coat for this material is more attractive in my opinion.
by|Jan 1, 2023
A:Â Use this anywhere you would use thin plywood. It would need solid backing.
by|Jan 7, 2023
Q:I need a 40? x 40? piece for a donut stand. Price and what would be best?
by|Nov 7, 2022
1 Answer
Answer This Question
A:Â Hello,
We do have a 48"x48" 1/4" Red Oak panel available. You could complete the custom cut form and get the 40x40 size you need from it. The cost is shown on the product page.
by|Nov 8, 2022
Q:If I get four 11" x 11" custom cuts from a 2ft x 4ft piece, would I still get the left over wood?
by|Nov 5, 2022
2 Answers
Answer This Question
A:Â Sorry I have no idea I would probably ask someone at the store I'm horrible at measurement
by|Nov 7, 2022
A:Â Hello,
Yes, we ship the balance of the panel with the custom cuts.
by|Nov 7, 2022
Showing 1-4 of 51
Customer Reviews
4.6 out of 5
(218)
4.6
out of 218 reviews
91%recommend this product
5162
438
37
26
15
Filter by:
Showing 1-10 of 218 reviews
Oct 19, 2022
Did the job
I needed to hide the press board ends of my red oak base cabinets. It sands wells and stains evenly. To prevent splintering when cutting with my jig saw, I scored through the oak layer with a new blade. It cut smoothly.
by
Verified Purchase
Recommended
Oct 13, 2022
Panel for triangle table
It is good quality one side. The other side almost perfect
by
Verified Purchase
Recommended
Jul 28, 2022
Used in antique furniture restoration
The only negative I found with this oak veneer plywood, was that the oak layer was very thin. Any 'deep sanding' could be a problem, but overall I found this to be exactly what I needed to replace the original drawer liners in an 18th century oak cabinet. They also took a stain color very well.
by
Verified Purchase
Recommended
Apr 1, 2022
I love the product it was very easy to cut...
I love the product it was very easy to cut with a table saw edges stay in place
by
Verified Purchase
Jan 6, 2022
I needed a smooth panel to replace a section of...
I needed a smooth panel to replace a section of an oak desk at home that had a fake oak wood piece covering its drawers that was actually cardboard. The custom cut replacement oak piece was prepared perfectly, and the only detail I needed to manage was to stain the panel to match my oak finished desk. It came out very well and I would greatly recommend this product for anyone with a similar replacement panel need.
by
Oct 6, 2021
Nice look just clear coated.
Nice plywood used for inlay sides and bottom of drawers on my chest.
by
Verified Purchase
Mar 18, 2021
The plywood sheets were delivered safely, packaged well. I cut them into 6" strips. I used a pre-...
The plywood sheets were delivered safely, packaged well. I cut them into 6" strips. I used a pre-stain conditioner & walnut stain. I then veneered a door to my wine cellar. I added some iron clavos and hardware and it looks great! I have since painted black in the cracks & edges and it really pops! I'll do it again sometime on another door - only prepaint the edges next time.
by
Verified Purchase
Recommended
Jan 22, 2020
The free custom cut is AWESOME! The material itself is...
The free custom cut is AWESOME! The material itself is great, but wished the surface could be smoother
by
Verified Purchase
1 found this review helpful
Jan 10, 2020
Panel edges were damaged, otherwise good.
The panels themselves seem good overall. The problem was with the way it was packaged. There was damage to both of my panels on the edges. This could be a problem because I ordered exactly what I needed and didn't have a lot of room for error or waste.
by
Recommended
5 found this review helpful
Jul 16, 2019
Good quality and worked perfectly for what I needed.
Good quality and worked perfectly for what I needed.
Underlayment (Common: 5.0 mm x 4 ft. x 4 ft.; Actual: 0.196 in. x 47.75 in. x 48 in.)
Tri-PLY Underlayment is for use under vinylTri-PLY Underlayment is for use under vinyl and tile floors to smooth out your subfloor. Handy panels are perfect for small projects and repair work. They are easy to transport, lightweight and priced right. Everything you need to get a job done quickly.View Full Product Description
1/4 in. x 2 ft. x 4 ft. Birch Plywood
For convenience and creativity, Handprint'sFor convenience and creativity, Handprint's hardwood veneer plywood is as versatile as it is great-looking. Featuring clean, smooth, natural birch woodgrain on both the front and back faces, this handy panel is perfect for a wide variety of home DIY and decor projects - anywhere a beautiful, real-wood look is a top priority. Or if a natural finish isn't part of your plan, its smooth surface is ideal for custom finishes. Loved by makers and DIYers alike, we take the hard work out of home projects - but leave all the satisfaction in.View Full Product Description
1/2 in. x 2 ft. x 4 ft. PureBond Red Oak Plywood Project Panel (Free Custom Cut Available)
Unleash your inner craftsman and build beautifulUnleash your inner craftsman and build beautiful hardwood-faced creations with this PureBond Red Oak Plywood Project Panel from Columbia Forest Products. Harvested in a sustainable manner from a domestic forest, the red oak timber used for the decorative veneers is rotary-cut to exacting standards for an exquisite hardwood appearance that works splendidly on any furniture or cabinetry piece. This 1/2 in. x 2 ft. x 4 ft. panel is comprised of 100% natural wood and assembled with a soy-based, formaldehyde-free PureBond technology that won't subject interior environs to any toxic off-gassing, as UF-constructed panels are susceptible to do. The yellow poplar core substrate is layered in alternating cross bands with the red oak veneers, augmenting the rigidity, strength and flatness you expect from hardwood for lasting durability and enduring beauty. This 5-ply decorative plywood is a cost-competitive alternative to formaldehyde-laden panels and won't degrade the air quality of your home or business over time.View Full Product Description
3/4 in. x 2 ft. x 4 ft. PureBond Red Oak Plywood Project Panel (Free Custom Cut Available)
Unleash your inner craftsman and build beautifulUnleash your inner craftsman and build beautiful hardwood-faced creations with this PureBond Red Oak Plywood Project Panel from Columbia Forest Products. Harvested in a sustainable manner from a domestic forest, the red oak timber used for the decorative veneers is rotary-cut to exacting standards for an exquisite hardwood appearance that works splendidly on any furniture or cabinetry piece. This 3/4 in. x 2 ft. x 4 ft. panel is comprised of 100% natural wood and assembled with a soy-based, formaldehyde-free PureBond technology that won't subject interior environs to any toxic off-gassing, as UF-constructed panels are susceptible to do. The yellow poplar core substrate is layered in alternating cross bands with the red oak veneers, augmenting the rigidity, strength and flatness you expect from hardwood for lasting durability and enduring beauty. This 7-ply decorative plywood is a cost-competitive alternative to formaldehyde-laden panels and won't degrade the air quality of your home or business over time.View Full Product Description