#1 Home Improvement Retailer

Internet # 204856448

Model # 3073

Store SKU # 1000337198

3/4 in. x 2 ft. x 4 ft. PureBond Prefinished Maple Project Panel (Free Custom Cut Available)

$42.76
Limit 90 per order
Apply Now
Pay $17.76 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Free custom cut available - See details below
  • UV-resistant gloss-coated surface prevents scratches and fading
  • Prefinished Maple veneer on both sides of plywood
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

Conserve time, expenses and exertion on your next cabinetry or woodworking project with the PureBond Prefinished Maple Plywood Project Panel. A UV medium gloss coats the face and back veneers on this 3/4 in. x 2 ft. x 4 ft. panel, protecting your carpentry creations from fading, scratching and chipping. Harvested in a sustainable manner, American-grown maple trees form the foundation for the decorative veneers, exhibiting the natural warmth and beauty of hardwood that supplies visual allure for shelves, cabinets, end tables, serving trays, wall panels, benches, letter baskets and more. The soy-based PureBond technology used to assemble each 7-ply panel is formaldehyde-free, so it will not off-gas toxic fumes as UF-constructed plywood commonly does. All-wood construction includes yellow poplar veneer core layered in alternating cross bands for superb strength, flatness and rigidity.

Highlights

  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted Note: The form is not available on mobile devices.
  • 7-ply project panel is assembled with prefinished maple face and back veneers
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • Decorative top and bottom veneers exhibit the warmth, beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 3/4 in. x 2 ft. x 4 ft.; actual: 0.703 in. x 24 in. x 48 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 18 lbs.
  • Grade: B-2 - see grading guide for additional information
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 204856448

Model # 3073

Store SKU # 1000337198

Specifications

Dimensions

Actual Product Length (in.)48.000 inActual Product Thickness (in.)0.703 in
Actual Product Width (in.)24 inNominal Product Length (ft.)4
Nominal Product Thickness (in.)3/4Nominal Product Width (ft.)2

Details

Exposure DurabilityInteriorPack Size1
Plywood FeaturesSanded, UV PrefinishedPlywood Product TypeProject Panels
Project Panel TypeHardwood PlywoodReturnable90-Day

Warranty / Certifications

Manufacturer WarrantyProduct warranted against glue or bond failure. Product replacement provided.

Questions & Answers

44Questions
caret
Q:What would you recommend using on the sides that are unfinished? I’d like to use this as top for a folding laundry shelf. I like that the top and bottom are finished but I assume I’ll need to do something to the edges.
by|Nov 4, 2023
1 Answer
Answer This Question

A:  I would recommend going to your local Home Depot and checking with them. I believe edge banding would be a great option, but they will know what's best for you!

by|Nov 6, 2023
    caret
    Q:I'd like a 2' x 8' piece cut into six 12" x 32" panels (minus kerf). Are these cuts best done at the factory or at Home Depot?
    by|Aug 6, 2023
    1 Answer
    Answer This Question

    A:  Hi, These cuts are done at our mill for Columbia Forest Products! All you need to do is submit a form and we will custom cut them to your likings and ship them and the remaining pieces as well.

    by|Aug 8, 2023
      caret
      Q:What is the type of finish on the veneer? Is it polyurethane? While not expecting it to be waterproof, is it cleanable with damp cloth and will water bead on the surface?
      by|Mar 1, 2023
      1 Answer
      Answer This Question

      A:  Hi, The finish would be an epoxy acrylic coat. I would not recommend using a damp cloth and yes, the water will bead. There is more information on our website below! Thanks. https://www.columbiaforestproducts.com/product/uv-wood/.

      by|Mar 2, 2023
        caret
        Q:How much does one 4x4 sheet weigh?
        by|Dec 28, 2022
        1 Answer
        Answer This Question

        A:  Hello, Each panel weighs approximately 36 lbs.

        by|Dec 29, 2022
          Showing 1-4 of 44

          Customer Reviews

          4.6 out of 5
          • 4.6 out of 81 reviews
          • 92% recommend this product
          Filter by:
          Showing 1-10 of 81 reviews
          Delamination
          I ordered one of the 24” x 96” sheets and two of the 48” x 48” sheets (and had them custom cut). The 24” x 96” sheet and one of the 48” x 48” sheets look good. However, one corner of the second 48” x 48” sheet (about a square foot) is badly delaminated. Frustratingly, this product seems to be the only finished plywood available to retail customers anywhere in the Mid-Atlantic region.
          by
            Convenient, fast shipping for small projects with custom cut.
            Good quality and fast shipping. May be more than a full sheet but the convenience was worth it for me. I also put in a request to cut and they fit perfectly for some extra shelves for my Hampton Bay pantries and much better quality. Put some edge banding on and boom. Done!
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            Expensive but worth every penny.
            Just received 40 sheets of prefinished maple and am very pleased. The delivery people were friendly and carried the boxes to my door. At least 35 of the 40 sheets had no patches and the grain patterns are spectacular. The other 5 I did not look at but am certain they are equally high quality. The finish quality is much better than I can do. The cuts and corners were done with a nice sharp blade. These will be for kitchen base cabinets and will be an amazing upgrade from the present kitchen. I also took advantage of the Home Depot credit card 24 month payment plan. I would recommend the prefinished maple to anyone. As a bonus they are a Canadian product.
            by
              • Recommended
              This is good material, and the cuts I specified are precise; much better than I could do with my ...
              This is good material, and the cuts I specified are precise; much better than I could do with my hand saw. And they were available at my local Home Depot 3 days after I ordered them.
              by
                • Recommended
                3 found this review helpful
                High Quality Attractive Panel for Furntiture and Cabinets
                This pre-finished attractive panel is flat and square with a multi-layer core that is bond together well to form a strong moisture resistant panel that is ideal for indoor furniture and cabinet projects. The manufacturer applied gloss finish to both sides of the panel is durable and beautiful with no imperfections and should last for years when cleaned with non-abrasive cleaning products. A carbide tipped circular saw blade works well for cutting this panel to size with minimum splintering or tear out on the edges of the panel. I used this panel for a very strong and attractive computer table top that I secured to a support frame using small angle brackets under the panel to have no visible hardware on the top surface.
                by
                • Recommended
                7 found this review helpful
                Great Panels for DIY projects
                This 3/4in.x 2ft.x4ft. Pre-finished Maple Plywood is perfect for most small projects. You can carry this size panel in the back seat or trunk. The "half sheet" panel is ideal for handling. Light weight and easy to carry anywhere. The packaging is such that the panel is well protected for shipping and handling. The edges are void free making the edges easy to sand and paint or stain. It’s a water-resistant compilation that tolerates moisture better than formaldehyde-bonded plywood, while the 7-ply layering makes it less likely to warp than solid hardwood. The decorative hardwood panel is assembled with a soy-based PureBond adhesive that won’t emit airborne contaminants over time, as UF-constructed plywood is prone to do. These panels are available in larger sizes
                by
                • Recommended
                5 found this review helpful
                Beautiful panel; beautiful finish
                This is a very nice pre-finished "handy panel" of maple veneer. It is finished on both sides with a clear sealer. The panel I got is perfectly clear wood on the front meaning it is free of voids, knots, etc. and has one dark area in the wood veneer on the other side. This is not a problem for me as I know the imperfections in color that are to be found in Maple and this color variation adds to the visual interest of the piece for me. The finish on both of the front and back surfaces is remarkable. The finish is perfectly clear and the panel's smooth as glass. I will cut this panel into shelves to go alongside some cabinets I have and I will band the cut edges and sides with maple or a contrasting wood banding material. This is a beautiful pre-finished maple handy panel.
                by
                • Recommended
                2 found this review helpful
                High Quality Maple Veneer Plywood
                This is a very high quality maple veneer plywood which would be useful in many woodworking projects. I am using this for a sign application, but it could have many uses. As you can see from the picture below, it is a very clear maple veneer which should hold up very well. It is free of any significant blemishes. It was finished with a nice clear coat and it was very smooth. I would highly recommend this maple veneer plywood!
                by
                • Recommended
                5 found this review helpful
                Kitchen cabinets
                Been building my kitchen cabinet box frames using this product. The plywood is wonderful to work with and looks great. The prefinish removes a tedious step for DIY projects. They cut clean, but use some painter's tape over the cut line, for extra piece of mind. Kevin, the Columbia rep, has been a great deal of help through my project and I wish to acknowledge that. Shipping is very fast. All in all I am so happy the way my interior cabinets look and saved loads of money in the process.
                by
                Response from Columbia Forest ExpertDec 1, 2015
                Hello DIYGUY, Thank you for taking the time to write a review of the prefinished maple. We appreciate the positive feedback and I’m sure the cabinets look awesome. ColumbiaForestProducts
                • DIY
                • Recommended
                4 found this review helpful
                Nice Finish!
                This is a great looking piece of 3/4" plywood. The maple finish is very smooth. The edges will need to be finished, as does most plywood pieces. This is suitable for counter tops, or any project requiring a nice, smooth finish.
                by
                • Recommended
                2 found this review helpful
                Showing 1-10 of 81 reviews