Internet #312284408

Model #4940

5/32 in. x 1 ft. x 1 ft. 7 in. PureBond Maple Plywood Project Panel (10-Pack)

  • Each piece measures 12 in. x 19.2 in.
  • High quality wood core ensures smooth cutting
  • Maple veneers on both face and back
  • See More Details

Frequently Bought Together

+
+
Price:
$3359

Product Overview

This plywood is ideal for laser etching, CNC cutting and craft work. This pack includes 10-pieces of beautiful maple plywood.
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • Decorative top veneer, measuring approximately 1/42 in. thick, exhibits the beauty and timeless quality of natural hardwood
  • Grade: B-1 - see grading guide for additional information
  • Actual product thickness is approximately .141
  • For best results, store flat and allow panels to acclimate to interior climate before use in order to minimize warping.
  • Note: This panel is 100% wood and movement/warp can occur in response to changes in environmental conditions, even after shipment. We cannot guarantee flatness
  • Note: This panel is 100% wood and movement/warp can occur in response to changes in environmental conditions, even after shipment. We cannot guarantee flatness
  • California residents

Compare Similar Project Panels

current product
5/32 in. x 1 ft. x 1 ft. 7 in. PureBond Maple Plywood Project Panel (10-Pack)
1/4 in. X 1 ft. x 1 ft. 7 in. PureBond Maple Plywood Project Panel (10-pack)1/4 in. x 1 ft. x 1 ft. 7 in. Red Oak PureBond Plywood Project Panel (10-Pack)5/32 in. x 1 ft. x 1 ft. 7 in. PureBond Walnut Plywood Project Panel (10-Pack)
BrandColumbia Forest ProductsColumbia Forest ProductsColumbia Forest ProductsColumbia Forest Products
Name5/32 in. x 1 ft. x 1 ft. 7 in. PureBond Maple Plywood Project Panel (10-Pack)1/4 in. X 1 ft. x 1 ft. 7 in. PureBond Maple Plywood Project Panel (10-pack)1/4 in. x 1 ft. x 1 ft. 7 in. Red Oak PureBond Plywood Project Panel (10-Pack)5/32 in. x 1 ft. x 1 ft. 7 in. PureBond Walnut Plywood Project Panel (10-Pack)
Price
$3359
/box
$3489
/box
$3904
/box
$4452
/box
Ratings
(152)
(277)
(14)
(27)
Nominal Product Thickness (in.)5/321/41/45/32
Nominal Product Width (ft.)1111
Nominal Product Length (ft.)1-3/51-3/51-3/51-3/5
Weather ExposureInteriorInteriorInteriorInterior
Plywood FeaturesPaintable and StainablePaintable and StainablePaintable and StainablePaintable and Stainable
Engineered Wood TypeHardwood PlywoodHardwood PlywoodHardwood PlywoodHardwood Plywood
ShapeRectangularRectangularRectangularRectangular
View ProductView ProductView ProductView Product

Specifications

Dimensions

Actual Product Length (in.)
19.1
Actual Product Thickness (in.)
.141
Actual Product Width (in.)
12
Nominal Product Length (ft.)
1-3/5
Nominal Product Thickness (in.)
5/32
Nominal Product Width (ft.)
1

Details

Engineered Wood Type
Hardwood Plywood
Plywood Features
Paintable and Stainable
Returnable
180-Day
Shape
Rectangular
Span Rating
Not Applicable
Weather Exposure
Interior

Warranty / Certifications

Manufacturer Warranty
No

Questions & Answers

8Questions24Answers

Is this an MDF core plywood?

Asked by Djfb December 8, 2020
2
Answers

It looks like it works great for laser cutter.

Is this pre-sanded and if so, to what grit?

Asked by Jenny November 5, 2020
2
Answers

Yes. It has a maple veneer

It gives a grade and then says see grading guide, but where is the grading guide?

Asked by Jenny November 4, 2020
2
Answers

I think it’s b/bb

Will this be back in stock in the next week? Can I special order some?

Asked by Sam October 29, 2020
2
Answers

Excellent Product and Service by The Home Depot! Please keep providing High Level Products and Services! Many Thanks!!!

Do you know the settings for a Glowforge to cut and engrave the wood?

Asked by HJ October 9, 2020
5
Answers

Medium basswood iswttingbos what I use

I'm confused. Is this a 12" X 12" square or a 12" x 19.2" rectangle?

Asked by Rachelb August 19, 2020
5
Answers

They're a 12" x 19" rectangle.

Do you offer full sheets in the pure bond maple 5/32?

Asked by Scott June 24, 2020
1
Answer

We can do that as a special order through the prodesk, provided we service your local store. Email me at mhale@cfpwood.com with your location and I can confirm. Thanks!

Looking for a product that doesn't bow and warp. Is this that product?

Asked by Hogeye April 19, 2020
5
Answers

I have purchased about 10 boxes of this product. There has been 40 out of the 100 that I purchased that was warped. Luckily I was still able to use them in our designs.

Customer Reviews

  • 4.4
    out of 152 reviews
  • 82% recommend this product
5star-icon108
4star-icon13
3star-icon10
2star-icon12
1star-icon9
Filter by:
Showing 1-10 of 152 reviews
My last order of 2 boxes was VERY WARPED and I really wish I could get a new order to replace it ...
My last order of 2 boxes was VERY WARPED and I really wish I could get a new order to replace it but I needed to use them. My lasering group has been having the same problems and I really hope they get this problem fixed
by Warped
Response from CFP Customer ServiceJan 21, 2021
I apologize for the issue with warp that you experienced. We do our best to send out the flattest boards possible, but since it is an all-wood panel, some movement can occur even after shipping. Please reach out to me at mhale@cfpwood.com if you would like to discuss. Thanks -- Michael
1 person found this helpful
I use it in my laser and it cuts well every time. Nice clean sheets with a great grain that takes...
I use it in my laser and it cuts well every time. Nice clean sheets with a great grain that takes stain well.
by Trish
Quality is lacking...
I am using about 10 boxes a week, usually having none to minimal issues with it. However, the last 2 boxes I used, every sheet had the veneer delaminated from the core after cutting it.
by VNS
Response from CFP Customer ServiceDec 30, 2020
I apologize for this issue, you should not have had a delamination problem with our product and we will make it right. Please contact me at mhale@cfpwood.com or 336-291-5869 so we can discuss. Thanks -- Michael
1 person found this helpful
Losing money on this batch of wood that I bought
I make laser cut wood earrings to sell. I have been using this wood for quite sometime, it is for the most part fairly good for the price. Usually I buy 10+ boxes at a time, this batch I had to take 2 entire boxes back to the store due to severe imperfections. Now I am finding that the veneer is evidently not being glued down as it should be....this is my 4th piece that this has happened too. Not only is it the price of wood, it is the time it took on the laser and re-cutting. I am not sure what is going on with this company but I sure hope they figure things out quickly.
by KELLIE90
Response from CFP Customer ServiceOct 18, 2020
I apologize for the issue you had with our product. You should not have had the delamination issue you describe here and we'll be glad to make it right. Please give me a call at 336-291-5869 or email me at mhale@cfpwood.com. Thanks -- Michael
1 person found this helpful
I use this specific size for my glowforge laser cutter and it performs as good or better than the...
I use this specific size for my glowforge laser cutter and it performs as good or better than the “proofgrade” material recommended by GF. Amazing quality and each piece is almost perfect. Slightly smaller than the proofgrade material and masking is still recommended. Works great for my smaller products.
by JustP
Inconsistent, bad veneer
The quality on this plywood is so inconsistent and a lot of the panels I get are unusable. There's often chunks or strips of veneer missing on the backs that aren't related to knots or other natural parts of the wood. There are often seams between pieces of veneer running through the middle of the sheet. My last batch I had a sheet with no veneer on the back OR front of the last few inches of the sheet -- just a floppy bit of yellow stuff, whatever the core's made of. Someone saw that and put it in a box anyway. I filled out the contact form on the company's website last week and got no response at all. I'll just have to start returning this stuff to Home Depot and buy from a different brand with better standards.
by DanG
Response from CFP Customer ServiceJul 23, 2020
I sincerely apologize for the poor material you received. I would like to get some more information and see what we can do to make it right. Give me a call at 336-291-5869 or email mhale@cfpwood.com. Thanks -- Michael
Great price fits well in Glowforge which is what I...
Great price fits well in Glowforge which is what I bought it for. Cuts nicely.
by todd
Some boards were warped and not usable...
Some boards were warped and not usable
by HomeDepotCustomer
Response from CFP Customer ServiceFeb 18, 2021
I apologize for the issue you had with this product. This is an all wood panel and they can move in response to environmental changes. If you would like to discuss alternative products that may work better for your application you can email me at mhale@cfpwood.com. Thanks - Michael
Excellent Product! Well packaged and cut. Excellent!...
Excellent Product! Well packaged and cut. Excellent!
by CALEB
Pieces came in smooth and straight. Shipping was great at...
Pieces came in smooth and straight. Shipping was great at 3-4 days. A consistent product that meets my needs. My only complaint is how often it’s not in stock.
by AMY
Showing 1-10 of 152 reviews