Internet #309214772

Model #1118659

Store SKU #201504

Common: 1/2 in. x 4 ft. x 8 ft., Actual: 0.500 in. x 49 in. x 97 in. MDF Panel

Questions & Answers

Product Overview

The versatility of Roseburg MDF offers a smooth hard surface, exceptional machining, plus clean, sharp edges for cutting and drilling applications. The panel is engineered for non-structural applications and can be used in place of sanded plywood or solid wood. Strength and machinability makes Roseburg MDF the right choice for fabrication and precision parts.
  • California residents
  • Applications include cabinetry, furniture, fixtures, door parts, moldings and millwork
  • Free of knots and grain patterns
  • Meets or exceed the most stringent global emission standards
  • Made with recycled wood content
  • Panel easily accepts many finishes including: paint, varnish, lacquer, UV-fills, laminates and foils
  • Click to learn how to select the right lumber for your project

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.



Actual Product Length (in.)
Actual Product Thickness (in.)
Actual Product Width (in.)
Nominal Product Length (ft.)
Nominal Product Thickness (in.)
Nominal Product Width (ft.)


Engineered Wood Type
Particle Board/MDF
Plywood Features
Span Rating
Not Applicable
Weather Exposure

Warranty / Certifications

Manufacturer Warranty
See store for details

Questions & Answers


How much does this product weigh?

Asked by Doug July 22, 2020

Hello. Thank you for your question. This item weighs 45lbs/pc

Can this be used as a outdoor chalkboard using the proper primer and chalkboard paint? If not, which plywood sheet would work? Thank you in advance.

Asked by Kevin June 25, 2020

Hello. Thank you for your question. This is an interior product and will not hold up to the elements. I would recommend an “A” or “B” faced plywood or some exterior grade panel with a smooth face.

What colors does this come in?

Asked by Mike May 21, 2020

Hello. Thank you for your question. This item only comes raw, no colors.

Would this be strong enough for building a printer cabinet?

Asked by Jonny May 13, 2020

Hello. Thank you for your question. MDF is the perfect product for a printer cabinet. Note, MDF is not a structural product so if you have a heavy printer, you may want to use 3/4” MDF.

would this product work for replacing a card/craft table top

Asked by Dee May 2, 2020

Hello. Thank you for your question. Yes, this product would be perfect for your project.

can i have this cut into several peices and have them cut on a 45 degree angle?

Asked by charlie April 10, 2020

Hello. Thank you for your question. Please check with your local Home Depot regarding cutting capabilities.

Could these be used to build a 12ft X 16ft dance floor (with frame and support pieces) or would t...

Asked by Bob March 1, 2020

Hello. Thank you for your question. MDF is not a structural panel. Please consider a plywood or OSB underlayment panel for your use.

How well does it handle routering?

Asked by Thompson February 3, 2020

Good Afternoon! You can use a router on this product. It will handle it fine but likely will not be super smooth.Thank you!

Customer Reviews

Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings!
If you have questions or comments regarding the customer service you received please contact us.