#1 Home Improvement Retailer

Internet # 205369772

Model # 0590RBJN

Store SKU # 1000249515

H.K. Porter 52 in. Rebar Cutter and Bender

$299.00
Apply Now
Pay $274.00 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Crescent H.K. Porter® is the market leader for cutting products
  • Cuts and bends up to 5/8-in. thick (#5) steel rebar
  • Mounts on flat surfaces to enhance leverage and increase safety
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

The Crescent H.K. Porter rebar cutter and bender is perfect for any job site where rebar needs to be cut to length or bent to fit into forms. The tool's shear cutting head is capable of cutting and bending up to 5/8-inch thick (#5) steel rebar. Cutting head and lower bar are designed to be easily mounted to a bench or work station allowing for increased leverage.

Highlights

  • Shear-cut blades
  • Cuts and bends to 90° or 180°
  • Mounts easily on most flat surfaces to enhance leverage and increase safety
  • Maximum capacity 5/8 in.
  • Steel construction for durability
  • Never Use Any H.K. Porter cutters on electrified circuits, wire, or cable
  • Return Policy

Product Information

Internet # 205369772

Model # 0590RBJN

Store SKU # 1000249515

Additional Resources

Shop All Crescent

Specifications

Details

Rebar Accessory

Rebar Bender

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

Full Lifetime

Questions & Answers

9Questions
caret
Q:How much does it weigh ? TIA
by|May 6, 2024
1 Answer
Answer This Question

A:  Brian, This cutter/bender tips the scales at 52 lbs.

by|May 7, 2024
    caret
    Q:does it need to be screwed onto something or will freestanding bend #4 rebar
    by|Apr 17, 2022
    5 Answers
    Answer This Question

    A:  It needs to be Bolted to a 2"x8" wide and about 60" long board to be used safely.

    by|Jul 13, 2023

      A:  I did not use it until I screwed it down to a 4x8 sheet of 3/4” OSB

      by|Apr 18, 2022

        A:  It has holes for bolting.  I biked it to a 2” base and ended up ripping it out.  So the base needs to withstand a lot of pressure.  Currently use it free standing but it’s a pain in the butt that way unless it’s on the floor.  

        by|May 19, 2024
          1 found this answer helpful

          A:  Screwing it to a board is recommended, 2x6 or wider is standard industry practice. Helps most with stability

          by|May 19, 2024
            1 found this answer helpful

            A:  I've bent over 1000ft of #4 without bolting it down and only went pole vaulting once or twice :)

            by|May 19, 2024
              1 found this answer helpful
              caret
              Q:Will the bender bend a the Cal Code required 3" diameter bend?
              by|Oct 19, 2021
              2 Answers
              Answer This Question

              A:  5/8" is the maximum capacity for this cutter. Thank you SJ

              by|Apr 17, 2023

                A:  None of these rebar benders appear to bend to a diameter of bend spelled out in ICC code: "The diameter of the bend, measured on the inside of the bar, is not less than six-bar diameters." So for a #4 rebar, that is a bend diameter of 3", and 3.75" for #5

                by|Jun 19, 2023
                  caret
                  Q:How many cuts approximate can I get with this cutter? 5/8 size rebar
                  by|Aug 4, 2021
                  1 Answer
                  Answer This Question

                  A:  No way to determine number of cuts but you can replace the cutterhead once warn out. Thank you, SJ

                  by|Jun 30, 2022
                    Showing 1-4 of 9

                    Customer Reviews

                    4.6 out of 5

                    • 4.6 out of 62 reviews
                    • 90% recommend this product
                    Filter by:
                    Showing 1-10 of 62 reviews
                    by
                    • Verified Purchase
                    Love it. Bends #4 with ease, and a full bend is pretty well on 90 degrees. Haven’t used it to cut as I have a saw for that.
                    by
                    • Verified Purchase
                    First, it will not cut 5/8" rebar; total lie. 5/8"...
                    First, it will not cut 5/8" rebar; total lie. 5/8" will not even fit into the jaws. Second, you had better have a couple young strong guys using it if for the day; otherwise take this thing to the nearest garage sale or return it. buy a powered unit and you'll thank me.
                    by
                    • Verified Purchase
                    2 found this review helpful
                    I’ve used a lot of rebar cutter/benders over the years...
                    I’ve used a lot of rebar cutter/benders over the years that I’ve worked in construction, some good, others not so much. So when my last cutter “walked off the job” I was a little nervous about buying a replacement that didn’t work as well. I needn’t have worried, this cutter worked better than the last one that I had, and that one worked well. It cuts smoothly and easily, bends quickly and with tight bends. I have only cut #4 rebar so far, I know that #5 is not easy for any cutter/bender that I’ve used, but is should work at least as well as the other benders that I’ve used. I would recommend this tool, and would buy it again.
                    by
                    • Verified Purchase
                    1 found this review helpful
                    by
                    • Verified Purchase
                    by
                    • Verified Purchase
                    by
                    • Verified Purchase
                    This thing is excellent. I've used several of these in...
                    This thing is excellent. I've used several of these in the past, this one required much less brute force to use.
                    by
                    • Verified Purchase
                    Great tool for DIY
                    Tool worked real well. Able to bend stirrups really good. Highly recommend..
                    by
                    • Verified Purchase
                    • Recommended
                    Super easy to use and cuts like butter....
                    Super easy to use and cuts like butter.
                    by
                    • Verified Purchase
                    Showing 1-10 of 62 reviews