![]() | ![]() | ![]() | ![]() | |
Brand | Custom Building Products | Custom Building Products | Custom Building Products | Custom Building Products |
Name | Aqua Mix 1 Qt. Polished Granite Cleaner and Resealer | TileLab 15 oz. Aerosol Grout Sealer | Aqua Mix 1 Qt. High-Gloss Sealer | Aqua Mix 1 Qt. Seal and Finish Low Sheen Sealer |
Price | $1138 | $1371 | $1687 | $1687 |
Ratings | (100) | (135) | (13) | (6) |
Flooring Type | Tile | Tile | Tile | Stone |
Recommended Surfaces | Granite | Tile & Grout | Slate,Tile | Stone |
Where to Use | Bathroom,Floors,Kitchen,Outdoor | Bathroom,Floors,Kitchen | Floors | Bathroom,Floors,Kitchen,Outdoor |
Flooring Material Features | No mixing required | Stain resistant,Water based | Stain resistant,Water based | Stain resistant,Water based |
Maximum coverage area (sq. ft.) | 100 | 525 | 250 | 250 |
Indoor/Outdoor | Indoor/Outdoor | Indoor/Outdoor | Indoor | Indoor/Outdoor |
Product Form | Non-Aerosol Spray | Aerosol | Liquid | Liquid |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Custom Building Products | Custom Building Products | Custom Building Products | Custom Building Products |
Name | Aqua Mix 1 Qt. Polished Granite Cleaner and Resealer | TileLab 15 oz. Aerosol Grout Sealer | Aqua Mix 1 Qt. High-Gloss Sealer | Aqua Mix 1 Qt. Seal and Finish Low Sheen Sealer |
Price | $1138 | $1371 | $1687 | $1687 |
Ratings | (100) | (135) | (13) | (6) |
Flooring Type | ||||
Recommended Surfaces | ||||
Where to Use | ||||
Flooring Material Features | ||||
Maximum coverage area (sq. ft.) | ||||
Indoor/Outdoor | ||||
Product Form | ||||
View Product | View Product | View Product | View Product |
TileLab Aerosol Grout Sealer that does not penetrate the grout should be wiped dry within 5 minutes. For further assistance please contact us at 1 800 282 8786 option 3.
If you are using it on tile, yes. This is a great product. It is simple to apply just keep the area clean and dry before applying. I’ve noticed a better adhesion when it’s recently cleaned and dried.
In order for us to give you the best possible answer, we would like to know a few more details regarding your project. For further assistance please contact us at 1 800 282 8786 option 3.
In order to give you the best possible answer, we would like to know a few more details regarding your project. For further assistance please contact our technical services department at 1 800 282 8786 option 3.
Coverage for the TileLab Aerosol Grout Sealer will vary depending on tile size and joint width. For further assistance please contact our technical services department at 1 800 28 2 8786 option 3.
It does not ruin the tile but some of the grout came off when I used it.
Yes. You are sealing the grout in between the glass tiles and the sanded grout/caulk is porous.
You need additional ventilation.
I would say if applied generously, a second coat is not needed. Especially on flat surfaces like a floor. Vertical surfaces might need a second coat depending on your coverage.
I sprayed it on everything since it was hard to control to just the grout joints. It seemed to seal everything. If the tile is non-pourous (less pourous), it will take longer to dry, but it did seal mine. The water beads up nicely.