Top Rated

Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
SpreadStone Mineral Select Countertop Finishing Kit is real stone in a unique three-step system that adds an elegant new surface to existing laminate kitchen and bath countertops -as well as old kitchen tabletops, bar tops, coffee tables and other surfaces. The complete process is fast and simple, requiring no special tools or time-consuming creative skills to achieve outstanding results. Simply roll on each layer as directed to achieve decorative and lasting functional surfaces fast.
Container Size | 1 Quart |
|---|---|
Coverage Area (sq. ft.) | 35 sq ft |
Application | Cabinet & Countertop |
|---|---|
Application Method | Brush, Roller |
Base Material | Water Based |
Coating Product Category | Paint |
Color Family | Gray |
Color/Finish | Onyx Fog |
Dry to Touch (min.) | 60 |
Interior/Exterior | Interior |
Kit | Yes |
Paint & Primer in One | Yes |
Paint/Stain Clean Up | Soap & Water |
Paint/Stain Features | Mildew Resistant, Stain Resistant, Washable |
Returnable | 90-Day |
Sheen | Semi-Gloss |
Surface Material Use | Composite/Vinyl, Concrete, Masonry, Vinyl, Wood |
Time before recoating (hours) | 2 |
Transparency | Solid |
Manufacturer Warranty | Limited Warranty |
|---|
Hello, yes you can apply this to metal. Just ensure there is no rust that may bleed through otherwise you will need an inhibitor.
Sorry, we do not have that information.
Hello, use the roller and or brush and only put on in thin coats and spread it during application. If you get any pooling then it is being applied too thickly.
Hello, 2 kits is perfect for that square footage and you will have left over material for any touchups and additional coat if desired.
Hello, yes, you can achieve a smooth finish with this product the key is in the duration of sanding you perform and also the ability to switch between different grades of sand paper. Obtain additional grits from your local hardware store. Feel the surface after sanding and continue until desired smoothness effect is achieved.
Hello, It appears that you may have trapped moisture within the layers of the sealer. Normally 2 or 3 coats is what is recommended and you have gone far beyond the limit of the application directions.
Hello, this product would be a permanent finish for your countertop. It will not peel, crack or wear off. Your only maintenance would consist of a resealing of the clear coat every 2-3 years.
Good day. If you want to eliminate the grout lines and have a level surface then you will need to use a leveler like our rockpatch product. Sand the tile to scuff, clean well, apply the rockpatch with a squeegee or straight edge and let it dry. You can then apply the countertop kit over the rockpatch.
Viewing 1-8 of 975
4.6 out of 5