Update your bathroom with the DANCO Tub Spout with Diverter in Brushed Nickel. Old worn out tub spouts have a tendency to erode and crack creating unwanted leaks. Replacing your dirty, dingy tub spout will help upgrade the look of your tub/shower and help prevent leaks which will save water and save you money. This tub spout is constructed from metal for strength and durability in your tub/shower. It features a 5-1/2 in. reach to provide an abundance of clearance space. This tub spout comes complete with adapters for a hassle-free installation.
MODERN DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and the decorative design will give a fresh update to your bathtub.
CONNECTION SIZE: Designed to fit 1/2 in. Copper Pipe Slip Connection, 1/2 in. Male Threaded Connection with Short Stub out connection, 1/2 in. Male Threaded Connection with Long Stub out Nipple and 3/4 in. Male Threaded Connection with Short Stub Out Nipple.
ADAPTERS INCLUDED: This Tub spout DIY installation kit comes with an extension nipple and adapter to ensure a snug fit onto your existing stub out nipple pipe to replace your existing tub spout.
DIVERTER INCLUDED: This tub spout includes a diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead.
TUB SPOUT REACH: The bathtub faucet spout has a 5 in. reach.
BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
HASSLE-FREE INSTALLATION: You will need Phillips screwdriver, sandpaper, silicon grease and pipe thread tape to install and to help prevent leaks and provide a better seal during installation.
BRUSHED NICKEL FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures.
A:Â Thank you for your interest in Danco products and for your inquiry. Unfortunately, Danco model number 11080 will not fit on a Delta RP12307 adapter. However, Danco model number 10944 is designed to be used with a RP12307 adapter.
by|Mar 27, 2023
Q:Will this screw on a Delta tub spout adapter?
https://www.homedepot.com/p/Delta-Tub-Spout-Adapter-RP33794/205611224?g_store=&source=shoppingads&locale=en-US&&mtc=SHOPPING-CM-CML-GGL-D26P-026_007_PLUMB_REPAIR-NA-MULTI-NA-SMART-2998850-NA-NA-NA-NBR-NA-NA-N
by|Jan 3, 2023
1 Answer
Answer This Question
A:Â Thank you for your interest in Danco products and for your inquiry. To better assist you please contact Danco Product Support at Danco.Support@NCH.com .
by|Feb 20, 2023
1 found this answer helpful
Q:Is there an adjustment inside the spout if it spits water all over when the diverter is up for the shower? Or is it a faulty product?
by|Jul 25, 2022
1 Answer
Answer This Question
A: Thank you for contacting Danco. Please call 800-523-5135 option #2 during our business hours (Monday – Friday 8 am – 5 pm CST), or email support@danco.com so our Technical Support Team can make sure that you have the correct products and provide you with the proper technical assistance for your DIY installation.
by|Jan 8, 2023
1 found this answer helpful
Q:where can i find replacement gasket/o-rings for this? my tub spout is constantly leaking...
by|Jun 6, 2022
1 Answer
Answer This Question
A:Â Thank you for your interest in Danco products and for your inquiry. To better assist you please contact Product support at 1-800-523-5135 Monday-Friday 8 a.m. - 5 p.m. CST.
by|Jun 9, 2022
Showing 1-4 of 21
Customer Reviews
3.8 out of 5
(614)
3.8
out of 614 reviews
64% recommend this product
5282
4123
354
255
1100
Filter by:
Showing 1-10 of 614 reviews
Feb 3, 2023
Will cause damage to your pipes. DO NOT BUY!!!
The product says easy install, but I'd anything but if you are attempting to place it on a slip pipe. The method to mount it requires attaching a threaded plastic pipe, but to get it right the screw will cause damage to your pipe. Do not buy unless you want to also pay for repairs.
by
Jan 11, 2023
Treads were corroded
Package said it would fit 4" stub with treaded end. Unfortunately, spout would not tread fully onto stub so spout would not meet the shower wall.
by
Verified Purchase
Dec 13, 2022
Does NOT Match other Danco Brushed Nickle Items
I purchased this along with their handle, overflow plate and drain all in brushed nickle - this faucet is much shinier and does not match at all. See photo.
by
May 19, 2022
Look no more
Very updated Style/ Vintage Design. Very Dummy proof to Install.
by
Verified Purchase
Recommended
Apr 8, 2021
I really wanted to like this but...
Despite it looking lovely, and feeling sturdy, the inner plastic workings are a great design flaw. It literally sprayed water out everywhere until enough pressure built that it turned the diverter on itself. Its possible i got a dud, i havent decided yet if i am going to exchange or just go with something different. If i do get a new one and it works better i will update my review accordingly,
by
Recommended
2 found this review helpful
Apr 19, 2019
Spout shot right off the bathtub when we turned it on. It was installed by a plumber too, I was ...
Spout shot right off the bathtub when we turned it on. It was installed by a plumber too, I was informed that this spout is a slide on/off type of installation and is not threaded. Buyers beware.
by
3 found this review helpful
Jun 19, 2018
This spout was easy to install and worked great at a reasonable price.
This spout was easy to install and worked great at a reasonable price.
by
Verified Purchase
Recommended
1 found this review helpful
Jan 30, 2018
Much better then the one that was on there. pjw
Much better then the one that was on there. pjw
by
Verified Purchase
Recommended
2 found this review helpful
Oct 7, 2017
works but a little disappointed
Very easy installation. My first time doing any sort of project like this. One of the instructions state that the stub out nipple should be 4" from wall - ours is. However, once tightened, there is still a significant gap between the spout and the wall. Now I will have to purchase some sort of filler (expanding foam stuff), otherwise water will leak to the back wall. Disappointment #2: there is a tiny leak from diverter. I purchased this slightly more expensive, more heavy duty spout thinking that it would be better quality than the generic spout we originally had. Wrong, the leak was the reason we replaced the spout to begin with.
by
Response from DancoSupportApr 29, 2020
Thank you for taking the time to write this review. Danco strives to provide the highest quality and most innovative products for the best value. However, products can sometimes not work for certain situations and therefore we provide technical assistance to help resolve those issues. Please contact our Product Support Team at 1-800-523-5135, option 2 and we will be happy to assist you.
5 found this review helpful
Jul 12, 2017
unsatisfied product
The sprout leaks after installation. Installation requires 20 minutes
by
Response from DancoSupportJul 19, 2017
Thank you for your feedback. Products can fail for a variety of reasons and that is why we offer a warranty. If you could reach out to Product Support team we would love to help resolve the issue. They can be reached at 800-523-5135 (option 2), or if you prefer you can email them at support@danco.com.
3 in. Diverter Tub Spout with Slip Fit and IPS Connection in Brushed Nickel
Update your bathroom with the Danco Tub SpoutUpdate your bathroom with the Danco Tub Spout with Diverter in Brushed Nickel. This simple DIY project will allow you to add a new style to your bath or replace an older tub spout that no longer works. Eliminate erosion, prevent unwanted cracks and save money with this quick update. This tub spout is constructed from metal for strength and durability in your tub/shower. It comes complete with adapters, and pipe thread tape for an easy and seamless installation. The spout is compatible with 1/2 inch copper slip, 3/4 inch threading and 1/2 inch threading, and 1/2 inch nose threading. For a sharp tailored look in your bathroom, choose Danco's Brushed Nickel Diverter Tub Spout.View Full Product Description
5-1/2 in. Decorative Tub Spout, Matte Black
Matte black is becoming the finish of choiceMatte black is becoming the finish of choice especially when it comes to decor. Matte black can be naturally looked as modern, but it works well as a transitional finish too, every space needs a little bit of black so adding in black hardware, faucets, and other fixtures is a great way to include this design staple into your space. Update your bathroom with the DANCO tub spout with diverter in matte black. Old worn-out tub spouts have a tendency to erode and crack creating unwanted leaks. Replacing your dirty, dingy tub spout will help upgrade the look of your tub/shower and help prevent leaks which will save water and save you money. This tub spout is constructed from metal for strength and durability in your tub/shower. It features a 5-1/2 in. reach to provide an abundance of clearance space. This tub spout comes complete with adapters for a hassle-free installation.View Full Product Description
Forte Sculpted Diverter Bath Spout in Vibrant Brushed Nickel with Slip-Fit Connection
With their simple, traditional designs, ForteWith their simple, traditional designs, Forte faucets tastefully complement a variety of decor styles. This bath spout features a sleek, rounded silhouette and a sculpted design that coordinates well with other Forte accessories. The spout allows you to divert water flow to a showerhead.View Full Product Description
Forte Sculpted Diverter Bath Spout in Vibrant Brushed Nickel with NPT Connection
With their simple, traditional designs, ForteWith their simple, traditional designs, Forte faucets tastefully complement a variety of decor styles. This bath spout features a sleek, rounded silhouette and a sculpted design that coordinates well with other Forte accessories. The spout allows you to divert water flow to a showerhead.View Full Product Description