Store SKU #
A: Thank you for your interest in Danco products and for your inquiry. Danco model number 89265 is designed to fit 3/4 in. threaded pipe, 1/2 in. threaded copper pipe, and 1/2 in. copper pipe with no threads.
A: Thank you for your interest in Danco products and for your inquiry. Unfortunately, Danco model number 11079 will not fit on a Delta RP12307 adapter. However, Danco model number 10944 is designed to be used with a RP12307 adapter.
A: HOWDEE !! THIS SPOUT DOES NOT USE THE END THREADS TO SCREW/HOLD THE SPOUT IN PLACE. A SERIES OF O RINGS, SEALS AND PLASTIC...ALIGN/CENTER THE SPOUT... YOU PUSH IT IN PLACE AND SECURE IT WITH THE LOCKING RING IF YOU LOOK AT THE SPOUT..YOU WILL SEE THE U SHAPED OPENING ON THE BOTTOM..THIS IS WHERE THE SPOUT GETS SECURED. I USED A MIRROR. THERE ARE DIFFERENT ESCUCHEON /TRIM PLATES THAT MAY BE USED FOR ASTHETIC PURPOSES. THE INCLUDED INSTRUCTIONS WERE CLEAR..AND WERE UNIVERSAL SO COVERED MANY APPLICATIONS. GET SOME SILICONE PLUMBERS LUBE TO SMOOTHE THE O RING/SEAL INSTALLATION. HOPE THIS HELPS...
A: Thank you for your interest in Danco products and for your inquiry. This tub spout will work on 1/2" threaded pipe that is either about 3/4 in. or about 4 in. from the wall.
|Name||Diverter Tub Spout with Slip Fit and IPS Connection in Chrome||3 in. Diverter Tub Spout with Slip Fit and IPS Connection in Brushed Nickel||Tub Spout with Diverter and Handheld Shower Fitting||5-1/2 in. Decorative Tub Spout in Chrome|
Save $1.99 (8%)
|Spout Type||Shower/tub diverter||Shower/tub diverter||With Handshower||Shower/tub diverter|
|Spout Reach (in.)||5 in||5||4.5||5.5 in|
|Plumbing Part Type||Spout||Spout||Spout||Spout|
|Application||Tub & Shower||Tub & Shower||Tub & Shower||Tub & Shower|
|THD SO SKU||1000395889|
|View Product||View Product||View Product||View Product|