$2.90
- Replaces Delta OEM # 134
- Repairs Delta single-handle faucets manuf. before 1976
- Includes (2) seats and (2) springs
Product Details
Specifications
Questions & Answers
Apr 3, 2018
I have had Delta one-handle tub faucets for 30 years, the same ones, original, installed when I b...
I have had Delta one-handle tub faucets for 30 years, the same ones, original, installed when I built my house. I keep these seats and springs on my shelf at all times. Every so often the rubber rings wear out as expected and will cause a leak, but no big deal. I am a 65 year old female and I can easily take apart the handle, remove the old seats and springs and pop new ones in. These are good quality. I always buy them at Home Depot too! The Danco brand is comparable to the Delta ones, work just as well, and cost less.
by
Response from DancoSupportJan 23, 2020
Thank you so much for reaching out to us and providing your feedback. We are sorry to hear that we did not meet your full expectations. If there is any way we can help find what you are looking for or troubleshoot any issues you have please don't hesitate to reach out. You can call our Technical Support Team at 1-800-523-5135 option #2 during our business hours (Monday – Friday 8 am – 5 pm CST) or if you prefer you can email them at support@danco.com.
Mar 31, 2018
These seats and springs are for Delta and Peerless faucets. The seats are made from rubber, not w...
These seats and springs are for Delta and Peerless faucets. The seats are made from rubber, not what those cheap sets are made of. I have installed a many of these seats and springs over the years. I will share easy installation of both. Use a standard lead pencil and on the tip ( lead end ) place the seat and the spring on the tip. Support the two with your fingers and slowly drop into openings. The springs will fall into place but the seats have to the coached in. Using a very small screwdriver, gently push on the side of rubber seat on the area that it will not enter and this will enable the seat to set in place. The seats are both compatible with hot and cold.
by
May 4, 2022
by
Feb 18, 2020
Simple, affordable...
Simple, affordable
by
Feb 6, 2019
4 Star Review
Rating provided by a verified purchaser
by
Response from DancoSupportDec 17, 2019
Thank you so much for your feedback. We really appreciate you being a loyal customer and helping to share the word about us. We work hard to meet expectations like yours, and we’re happy to hear we hit the mark for you!
Apr 6, 2018
These fit our Delta faucet perfectly. It was easy to disassemble, replace the seats and springs,...
These fit our Delta faucet perfectly. It was easy to disassemble, replace the seats and springs, and reassemble the faucet. We plan to get some extra sets for our other faucets just to have them on-hand for future leaks. They are sturdy, yet flexible. Probably will last quite awhile. They may fit other faucets as well, but I would check them out first before trying that.
by
Apr 1, 2018
My house was built in 1953 and I have owned it since 1989. The small upstairs bathroom still has...
My house was built in 1953 and I have owned it since 1989. The small upstairs bathroom still has the Delta faucets that the original owner installed in the 1960's-early 70's, so I was thrilled to find these replacement seats and springs at a very reasonable price. It took less than 30 minutes to turn off the water, remove the old seats and springs and get back in business. No muss, no fuss and most importantly no leaks. They worked great. I definitely would recommend these if you have old Delta faucets in your home.
by
Apr 1, 2018
SEATS AND SPRINGS FOR DELTA are made by Danco. Parts come in a blister package. The springs are metal and the seats are rubber. Very easy to install by following faucet installation information. Springs and seats do last along time. Be careful not to drop these tiny parts down your drain by placing a washcloth over the drain opening. Highly recommend the Danco springs and seats.
by
Apr 1, 2018
Sooner or later, every faucet will need to have the rubber washers replaced. I was a little over...
Sooner or later, every faucet will need to have the rubber washers replaced. I was a little overdue on the kitchen faucet and it was continuing to drip. The Delta replacement was quick and easy, and can be installed by anyone. No DIY or Professional required. Shut off the water beneath the faucet and open it to release any pressure. Used the hex wrench provided to loosen the head and take it apart one piece at a time. For non-DIY persons, simply lay out the pieces in the order removed. Install the new springs and rubber washers in the reverse order, place head back on and tighten with hex wrench. Done! Turn water back on underneath sink and you are ready to go for several more years........
by
Response from DancoSupportJan 4, 2020
Thank you for providing your feedback. We look forward to hearing from our customers on how their DIY experience was as it always helps us to improve. We’re happy to hear that we were able to meet your expectations. If there is ever anything else we can do please don’t hesitate to reach out to us.
Frequently Bought Together
Price:
$290
Compare Similar Faucet Hardware
|  |  |  | |
| Brand | DANCO | Everbilt | Everbilt | Everbilt |
| Name | Seats and Springs for Delta | Seats and Springs for Delta Delex Faucet | No.38 Seats For Pfister (2-Pack) | Seats and Springs For Delta Ball Valves |
| Price | $290 | $392 | $426 | $498 |
| Ratings | (9) | (0) | (0) | (0) |
| Plumbing Part Type | Seat | Seat | Seat | Seat |
| Application | Bathroom Sink,Kitchen Sink | Bathroom Sink,Kitchen Sink,Laundry/Utility,Tub & Shower | Bathroom Sink,Kitchen Sink,Laundry/Utility,Tub & Shower | Bathroom Sink,Kitchen Sink,Laundry/Utility,Tub & Shower |
| Installation Hardware Type | Seats | Seats | Seats | Seats |
| Material | Stainless Steel | Rubber | Rubber | Rubber |
| View Product | View Product | View Product | View Product |
Related Products
