#1 Home Improvement Retailer

Internet # 306239569

Model # HYR460

Store SKU # 1003418265

Water-Saving Toilet Total Repair Kit with Dual Flush Valve

$29.19
Apply Now
Pay $4.19 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Converts most toilets 1.6 to 3.5 GPF to water-saving dual-flush
  • Works with standard 2 in. flush valve toilets
  • No tank removal, Drop-In installation
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

The Danco HYR460 HydroRight Total Repair Kit increases your toilet's efficiency with an included Dual Flush Converter that will save water by reducing the amount of water used with each flush. The HydroRight will also help solve the most common leaking issue in toilets, a non-functioning flapper. The Dual Flush Converter sits vertically and solidly onto the flush valve opening to create a better seal and eliminate the possibility of leaks. No more leaky flapper, tangled chains or handles that have to be jiggled. The Total Repair Dual Flush Valve quickly and easily converts a standard toilet into a two-button, dual flush toilet. One button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper - the setting needed 4 out of 5 times. The second Full Flush button uses the normal amount of water for solids. Designed for drop-in installation, the HYR460 can be installed in without tools and without having to remove the tank.

Highlights

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper - the setting needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. Not compatible with Mansfield toilets
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; Slide blue silicone dome gasket down overflow tube, seating gasket into flush valve
  • DETECTS LEAKS: Detects leaks and signals when a leak is found
  • CALIBRATION: The Total Repair Kit can be calibrated to adjust the exact amount of water needed, saves water
  • COMPLETE KIT: Combines two products that together will increase your toilet's efficiency: HYR270 Dual Flush Converter and HC630 HydroClean fill valve
  • NO WARP SEAL: Permafit silicone seal is Chlorine and chemical resistant and will not warp
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 306239569

Model # HYR460

Store SKU # 1003418265

Additional Resources

Shop All DANCO

Specifications

Dimensions: H 10 in, W 3 in, D 3 in

Dimensions

Product Depth (in.)

3 in

Product Height (in.)

10 in

Product Width (in.)

3 in

Details

Application

Toilet

Color/Finish Family

Blue

Included

Hardware Included

Material

Plastic

Pack Size

1

Plumbing Part Type

Toilet Kit

Returnable

90-Day

Toilet Repair Kit Type

Flush Valve Repair Kits

Warranty / Certifications

Manufacturer Warranty

Limited 1 Year

Questions & Answers

20Questions
caret
Q:Will this fit for the Kohler that has current flapper measures about 3 to 3.5"? Thanks
by|Apr 16, 2023
1 Answer
Answer This Question

A:  Thank you for your interest in Danco products and for your inquiry. Danco HYR460 is designed to fit toilets that have a 2-inch flush valve and will not fit toilets with a 3-inch flush valve.

by|Oct 6, 2023
    caret
    Q:What is the GPF with this Danco system? My old toilet was 1.6 GPF, so what is the new GPF?
    by|Jan 25, 2023
    1 Answer
    Answer This Question

    A:  Thank you for your interest in Danco products and for your inquiry. The amount of water used during the use of model number HYR460 varies depending on the model and age of the toilet, as well as how the HYR460 is adjusted.

    by|May 7, 2023
      1 found this answer helpful
      caret
      Q:For a 1.6 GPF toilet, what GPF could I expect for the quick flush?
      by|Jan 18, 2023
      1 Answer
      Answer This Question

      A:  Depends on the level you set it up at. Will see savings

      by|Feb 5, 2023
        caret
        Q:Will this work with a toilet tank that has a side flush lever handle (left side of toilet)? How long is the tube that runs from the button to the canister?
        by|Nov 20, 2022
        1 Answer
        Answer This Question

        A:  Hello, Thank you for your interest in Danco products and for your inquiry. To better assist you please contact Product support at 1-800-523-5135 Monday-Friday 9 a.m. - 3 p.m. CST. Regards, Product Support

        by|Aug 11, 2023
          Showing 1-4 of 20

          Customer Reviews

          3.8 out of 5

          • 3.8 out of 69 reviews
          • 71% recommend this product
          Filter by:
          Showing 1-10 of 69 reviews
          Danco water-saving dual flush for 2" toilet conversation kit.
          Instruction came with the unit clear enough for customers to follow except few confusions about the wedge go on the toilet existing vertical plastic pipe and to cutout to shorten the L shape water suppy pipe at the bottom of the water tank. However the main issue is the button to operate the liquid flush and the solid flush I have to hold on the PUSH button for the flush complete, if I release the button during the flush then it will stop the water flow to flush everything down to the drain. I have the cable connected from the flush button to the main unit unobstructed, it form an arc around the supply valve at corner of the tank, very disappointed! I have read the same issue from other customers from Home Depot website and the anwser from the Manufacturer is to make sure the cable connected to the flush button is not crooked. I did just that but the result is the same, nothing better!
          by
          • Verified Purchase
          Suggest that you *READ BEFORE PURCHASE* Now this is NOT an attempt to discourage you from purchas...
          Suggest that you *READ BEFORE PURCHASE* Now this is NOT an attempt to discourage you from purchasing this kit, it is a quality product; in fact better quality than most others. I am in NO Way a fan of “Low-Flow” in the toilet department, I am a big guy & along with that you get the picture, these are just some things that I think are important & had I know might have possibly played a role in my decision. 1st The flushing mechanism: You have to hold the button in throughout the duration of the flush, you can release it once the bowl is empty however I foolishly assumed that once you pressed & released the button you were good to go; this is not the case. The flush actuator is actually controlled by braided steel cable “impressive”. 2nd There have been some comments on this & similar models about the Zip-Tie breaking after so long of use. Do yourself a favor purchase a pack of heavier duty Zip-Tie’s down the electrical isle you need only 1, I however used 2. 3rd The plunger that controls the tank refill is held in place by crimping itself to the refill tube mounted in the toilet tank. This is held in place with a clamp that is synched tight with a Zip-Tie (which is included) this needs to be tight enough to hold the plastic housing in place so that the plunger seals the tank water from bowl. It’s a nice simple installation design that serves the purpose & is user friendly, it includes a rubber gasket that fits tightly over the refill tub & helps hold the plunger mechanism in place. But it seems that the included Zip-Tie isn’t as beefy as it could be, I used two 12 inch (I agree that it is overkill but I did not want to come home to a mess one day). Pros: 1st In truth I would recommend it I like the plunger design, the seal is of great quality, I hate the old chain & flapper. 2nd Quick & Easy installation, it took longer removing the old parts than it did installing the new. 3rd Three customizable water control options that are simple to set: a.) Rate of flow on refilling allows you to adjust the pressure inside the tank with the twist of a knob. b.) Simple adjustment for the mount of water used on the number 1 flush setting, for those who like a lot of pressure or for those more concerned with low-flow. c.) Simple independent adjustment for the Amount of water used on the number 2 flush setting, for those who like a lot of pressure or for those more concerned with low-flow. Lastly my weird wife said that the buttons should be “Yellow & Brown” for easy identification ;-)
          by
            • Recommended
            44 found this review helpful
            by
            • Verified Purchase
            No more running water. Saves my water bill. Antiquated rubber flappers are history.And dual flash valves are in the future.
            by
            • Verified Purchase
            by
            • Verified Purchase
            After much research, thought this was an all-in-one solution. It...
            After much research, thought this was an all-in-one solution. It was not. It lacked the one piece that was needed for the complete toilet innards replacement. Searching for that one piece separately required another search online plus a trip to the store. Opted for a complete other system instead that truly had ALL that was needed to do a full repair.
            by
            • Verified Purchase
            1 found this review helpful
            The design is good, but the plastic components in the...
            The design is good, but the plastic components in the flush handle are not strong enough. I carefully attached the handle to the tank by (very) carefully tightening the wing nut on the handle. This pulled the clamping mechanism in the box inside the tank and broke off the very thin piece providing the clamping resistance. I don't see how this thin piece could ever withstand even mild tightening forces. Simply making this piece out of metal would solve the problem.
            by
            • Verified Purchase
            1 found this review helpful
            Easy install works great....
            Easy install works great.
            by
            • Verified Purchase
            It works for a while
            We installed these on 3 toilets 10 years ago. Now, the 1/2 flush works about 1/4 of the time, and the rest, it closes so quickly that the flush never completes. I plan to remove them.
            by
              Works well but installation instructions need some upgrades. Cleverly designed....
              Works well but installation instructions need some upgrades. Cleverly designed.
              by
              • Verified Purchase
              Showing 1-10 of 69 reviews

              Compare Similar Items

              current item

              Toilet Repair Kit Type

              Flush Valve Repair Kits

              Flush Valve Diaphragm Repair Kits

              Toilet Flush Kits

              Flush Valve Diaphragm Repair Kits

              Application

              Toilet

              Toilet

              Toilet

              Toilet

              Included

              Hardware Included

              No Additional Items

              Hardware Included

              Hardware Included