Daptex Plus 12 oz. White Exterior/Interior Window and Door Foam Sealant

Thank you for posting your feedback. We're sorry to see your low star review on DAPtex Plus Multi-Purpose Foam Sealant. DAPtex Plus is specifically formulated for low pressure/low expansion (for use on surfaces/application where high pressure/over-expansion may result in damage). DAPtex Plus is a latex based chemistry, which means that it should be applied in reasonably warm and dry conditions and where air exchange can occur. Likewise, it is recommended for application in layers, with drying intervals between layers. This recommendation is to ensure consistent drying/performance development. As indicated on the package label and Technical Data Bulletin: "Tack free in 10 minutes. A one-inch bead fully cures in 24 hours depending on bead size, temperature and humidity" and "Not recommended for use at or below grade, or for closed cavities. For gaps more than 2” deep, use multiple layers of 1”-2” each." Of note, when cured, DAPtex Plus has sponge-like consistency (not a rigid texture as with other foam formulas). Because you did not provide any details regarding your project or application conditions, it is difficult to provide you with a more specific reply or product usage guidance in this format. DAP offers a full range of both one and two component foam products. At your convenience, please contact DAP's Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you regarding your project requirements, so that we can recommend an alternative product more in line with your needs/expectations.

Thank you for posting your feedback. We're sorry to hear about your frustration with your package of DAPtex Plus. If you are dissatisfied with your purchase, the product may be returned to the point of purchase or returned direct to DAP for a refund of your purchase price. Instructions for this process can be found on the product package. Should you require additional assistance, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477.

Thank you for posting your feedback. We're sorry to hear about your experience with DAPtex Plus Multi-Purpose Foam Sealant. DAPtex Plus is a latex based chemistry, which means that it should be applied in reasonably warm and dry conditions and where air exchange can occur, as it sole drying mechanism is evaporation. As indicated on the package label and Technical Data Bulletin: "Tack free in 10 minutes. A one-inch bead fully cures in 24 hours depending on bead size, temperature and humidity". Based on your commentary that: "After a week, had the surface rigidity of cotton candy! And the insiside was hollow and wet!", it is very likely that the product was applied under less than ideal conditions. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you regarding your project.

Thank you for posting your feedback. We're sorry to hear about your experience with DAPtex Plus Multi-Purpose Foam Sealant. DAPtex Plus is a latex based chemistry, which means that it should be applied in reasonably warm and dry conditions and where air exchange can occur. As indicated on the package label and Technical Data Bulletin: "Tack free in 10 minutes. A one-inch bead fully cures in 24 hours depending on bead size, temperature and humidity". DAPtex Plus is not intended to be applied "stand alone" in exterior applications, "For best results on exterior applications, apply a quality exterior latex paint to foam after full cure."