Plastic Wood 6 oz. Natural Latex Wood Filler

A:  Thank you for posting your inquiry. As indicated on the product package label as well as supporting product literature: "For larger and deeper holes, apply thin layers to build up thick sections. Allow wood filler to dry before applying next layer. Allow to dry thoroughly before sanding: approximately 3 to 6 hours for shallow fills up to 1/8” and 36 hours for deeper fills 1/4” and over." Should you require additional product/project support, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477.

A:  Thank you for posting your inquiry. DAP Plastic Wood is not internally water resistant, accordingly, it relies on secondary coatings (paint, solid stain, polyurethane, varnish, etc.) for its water resistance. No water exposure should occur until after the product has fully dried and been properly coated. As indicated on the product package label and supporting product literature: “Exterior applications and applications subject to water exposure must be sealed with a waterproof coating.” Should you have any additional questions or require further assistance, please feel free to contact DAP’s Technical Customer Service Department at 888-327-8477.

A:  You can definitely put a new screw. But I would recommend going for a smaller screw at the same place. If you are needing to put a bigger screw, then leaving the area is the best bet to make sure the area is sturdy enough.

A:  Thank you for posting your inquiry. DAP Plastic Wood Latex Wood Filler is designed for minor surface defects/cosmetic repairs, such as: nail/screw holes, cracks, knot holes, etc. As indicated on the product package label as well as supporting product literature: "Most repairs require just one fill. Larger and deeper holes may require more than one application. For larger and deeper holes, apply thin layers to build up thick sections. Allow wood filler to dry before applying next layer. Allow to dry thoroughly before sanding: approximately 3 to 6 hours for shallow fills up to 1/8” and 36 hours for deeper fills 1/4” and over. It can be sanded, cut, drilled, screwed, planed, stained, varnished, painted or lacquered." Should you have any additional questions or require further assistance, please contact DAP’s Technical Customer Service Department at 888-327-8477.

A:  Thank you for posting your inquiry. Per package label and supporting product literature: "if staining, test wood filler with desired stain on scrap wood before filling to ensure desired stain color." and "If wood is to be stained, stain before filling with wood filler. Then use stain to develop desired final finish.” Should you have any additional questions or require further assistance, please contact DAP’s Technical Customer Service Department at 888-327-8477.