Store SKU #
Store SO SKU #
A: When used as a spreader, the DWHT83191 has a max jaw opening of 4-1/2".
A: As long as the bar which is about 5”.
A: I just bought one, and the actual spread range is 2 7/8" minimum spread to 7 3/4" maximum spread.
A: I would check with DeWalt. There is a dimple on each end of the bar that does not allow the trigger part to be slid off and reversed. It may not be designed as a spreader. Good luck.
A: Hello, Below is the list of specifications for this item. Dewalt DWHT83191 4 35lb Clamping Force Small Trigger Clamp Function: 1 Handed Characteristic: Converts to A Spreader and with Its Removable Jaw Pads It Protects Work Surfaces, Tough Re-Enforced Nylon Body Deters Wear and Tear Item: Bar Clamp/Spreader Spreading Range (In.): 0 to 4-1/2 Throat Depth (In.): 1-1/2 Handle Material: Resin Type: Small Trigger Clamp Capacity (In.): 4-1/2 Good luck, Benjamin
A: 5 inches is the maximum
A: 4 & 1/2"
A: Your question reminds me of 7th grade algebra… it is not possible to solve for X without more information.
A: Mine measured 1 3/32".
A: X axis is what they are talking about.
A: Not sure what you are asking. The throat is 1.5 inches deep and the span is 4.5 inches. It will give 35 lbs. clamping pressure.
A: Yes these will work fine in that application. They can be as tight as you want them with the trigger handle.
A: Most likely too small
A: If the drawer is small enough and light weight (this only spans 4-1/2 inches).
A: It depends on the size of the drawer - you may have to get a larger clamp or even a 90 degree clamp. Look at the drawer construction and what you must piece back together. Take some measurements of what pieces must be clamped. You will want your clamp t o be a few inches larger than your measurement. Good luck on your project.
|Name||4.5 in. 35 lbs. Trigger Clamp with 1.5 in. Throat Depth||6 in. 100 lbs. Trigger Clamp with 2.43 in. Throat Depth||6 in. 300 lbs. Trigger Clamp with 3-1/4 in. Throat Depth||Clutch Style 34 in. Capacity Bar Clamp with Wood Handle and 2-1/2 in. Throat Depth|
|Jaw Width||1.3||3 in||3.25||1.0|
|Clamping Strength (lb.)||35||100||300||600|
|Hand Tool Type||Clamp||Clamp||Clamp||Clamp|
|Throat Depth||1.5||3 in||3.25||2.5|
|THD SO SKU||1000643958|
|View Product||View Product||View Product||View Product|