- Allows you to move between grits
- 8-hole pad made for use with dust collection
- Use with DW421K and DW423 sanders
- See More Details
Frequently Bought Together
Price:
$1797
Product Overview
The DEWALT 5 in. Random Orbit Palm Sander Pad is made for use with the DW421K and DW423K sanders. For added convenience, this sander pad allows for switching between grits. 8 Hole design for effective use with dust collection.
- California residents
- 8-hole pad for sanders with dust collection
- Designed for the DW421K and DW423K (sold separately)
- Rubber construction
- Allows for switching between grits
Info & Guides
Product Overview
- Allows you to move between grits
- 8-hole pad made for use with dust collection
- Use with DW421K and DW423 sanders
$14900
$229.00
Save $80.00 (35%)
Specifications
Dimensions
Product Height (in.)
1
Product Length (in.)
5.25
Product Width (in.)
5.25 in
Details
Color Family
Black
Kit
No
Power Tool Accessory Type
Sanding/Grinding/Polishing Accessory
Returnable
180-Day
Sanding, Grinding and Polishing Accessory Type
Sandpaper
Tools Product Type
Power Tool
Questions & Answers
28Questions42Answers
Will this fit a Porter Cable?
Asked by Geoffrey January 26, 20187
AnswersYes it fit my porter cable 342 Type 2.
Will it fit the D26453 model
Asked by Bob May 6, 20176
AnswersYes it will, according to the parts list info I found when I was looking for one for my D26453 it crosses over . Jim
Does this fit DWE6421?
Asked by Karen April 4, 20185
AnswersFor the DWE6421 you need DWE64233 UPC#885911442701. The website doesn't show it, but your local HD may have it in stock - mine did. It was $15.97. The Ryobi 4-hole replacement offered will also NOT fit this sander.
Will this fit a Hitachi palm sander
Asked by Russ February 9, 20174
AnswersI can't say for sure. I bought this to replace the pad on a Makita BO5010. I took my old pad into the store with me, and made a physical match. I checked the inventory count at my local store first to ensure there were units in stock.
Why is there only 3 screw holes in these pads? I've bought this same pad for years and its always...
Asked by David January 7, 20174
AnswersIt depends on the model of sander that you have. My model has 3 screws, they have both pads for both units.
What material backs the pad? Is it metal or plastic?
Asked by HD October 15, 20184
AnswersThis pad has a metal disc attached to a plastic base with foam and hook padding. Very durable...unless you are like me and wear through the paper and then break the hooks! Fortunately HD has them in store!
is the hole pattern for the screws set at 120 degrees so that it will fit a three hole pattern of...
Asked by husserl June 5, 20183
AnswersI cant tell you the degrees, but it is a 3 hole pattern. HD has them in stock. Take your sander and compare the pattern.
center hole for mounting ??
Asked by Ted October 30, 20173
AnswersNo. This has 3 screws for mounting.
Does this fit a d26453k?
Asked by Rod December 8, 20163
Answersyes
Does this fit Dw 421type 1
Asked by Tari October 7, 20163
AnswersYes. That's the sander I have and replaced the pad with this.
Customer Reviews
Overall Ratings
A clever idea--velcro on both the circular paper and on the sander (via this palm pad)--however d...
May 12, 2020
A clever idea--velcro on both the circular paper and on the sander (via this palm pad)--however dust still gets between the paper and the pad. This decreases the adhesion and throws off the sand paper. But the worse outcome is that it is easy to grind off the little adhesive spikes on the palm pad (since operating without its paper)
. This necessitates replacement of the pad at $20/whack.
It worked out well as a replacement pad for my DeWalt palm sander the old one was delaminating af...
September 27, 2018
It worked out well as a replacement pad for my DeWalt palm sander the old one was delaminating after about 10 years
The original Porter Cable part had a metal backing. This one uses a thick sheet of aluminum foil...
December 23, 2016
The original Porter Cable part had a metal backing. This one uses a thick sheet of aluminum foil. It lasted about 2 hours in use! It is junk. Go online and get the real thing.
It was easy to replace. Just 3 screws, but the...
January 10, 2021
It was easy to replace. Just 3 screws, but the new pad does not seem to have Strong hooks to hold slightly used sand disk in place. The original pad better and stronger hooks
Rating provided by a verified purchaser...
January 10, 2021
Rating provided by a verified purchaser
Not as good as original
December 30, 2020
I hate this thing. I bought one to replace the worn out pad on my sander. The original lasted several years and never had any issues with retaining the sanding discs. The hook/loop on the replacement is nowhere near as aggressive as the original. Now the sander starts throwing discs after minimal use. It is annoying enough that I am considering just buying a different brand sander. I don't know why they cannot sell a replacement part that matches the original. They sell a sanding pad for other models that attaches with four screws that has an aggressive hook/loop material on it, but it would be too much hassle to try to adapt it to mine.
The pad has only one bolt securing it to the...
December 25, 2020
The pad has only one bolt securing it to the sander, but there are 3 raised dimples that fit into holes in the pad to secure it in place. This is the 2nd one I’ve bought in the past 3yrs, but they’ve had a lot of hours of use in that time. Hundreds of pieces of sandpaper have been stuck on and torn off the pad. Paper just didn’t stick to it anymore
Rating provided by a verified purchaser...
December 24, 2020
Rating provided by a verified purchaser
OEM part, works great!
December 24, 2020
OEM part, works great!
December 17, 2020
Review this Product
Share your thoughts with other customers
Explore More on homedepot.com
Top Brands
More Products
Furniture
Outdoor Living
HVAC and Electrical
Storage and Cleaning Supplies