Internet #303122806

Model #DWHT83853

90-Degree 250 lb. Angle Clamp w/(2) Table Clamps

  • 250 lbs. of clamping force
  • 2 in. jaw opening
  • 2-table clamps for easy mounting to work surfaces
  • See More Details
$2097

Frequently Bought Together

+
+
Price:
$2097

Product Overview

The DEWALT 90° Corner Clamp is built tough with the ability to clamp up to 250 lbs. of force. It's 2 in. D throat is a great choice for a variety clamping projects. The accompanying table clamps allows for easy mounting to work surfaces.
  • 250 lbs. of clamping force
  • 2 in. jaw opening
  • 2-table clamps for easy mounting to work surfaces
  • Fixed 90° even with different material thicknesses
  • Easy fastening access
  • Limited lifetime warranty
  • Genuine DEWALT tool

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Clamps

current product
90-Degree 250 lb. Angle Clamp w/(2) Table Clamps
PocketClamp Right Angle Clamp for Pocket Hole Joinery4 in. Right Angle Clamp for Woodworking and Pocket Hole JoineryRight Angle Clamp with Automaxx Auto-Adjust Technology
BrandDEWALTMilescraftWENKreg
Name90-Degree 250 lb. Angle Clamp w/(2) Table ClampsPocketClamp Right Angle Clamp for Pocket Hole Joinery4 in. Right Angle Clamp for Woodworking and Pocket Hole JoineryRight Angle Clamp with Automaxx Auto-Adjust Technology
Price
$2097
$2438
$2601
$3499
Ratings
(29)
(24)
(11)
(134)
Clamp TypeAngle/CornerAngle/CornerAngle/CornerAngle/Corner
Jaw Width44 in48
Clamping Strength (lb.)250300300450
Hand Tool TypeClampClampClampClamp
Throat Depth44.25 in45.5
MaterialMulti-SurfaceSteelSteelSteel
View ProductView ProductView ProductView Product

Specifications

Dimensions

Jaw Width
4
Throat Depth
4

Details

Clamp Type
Angle/Corner
Clamping Strength (lb.)
250
Duty Rating
Heavy
Hand Tool Type
Clamp
Individual/Set
Individual
Material
Multi-Surface
Maximum Opening (in.)
4
Returnable
180-Day
Tools Product Type
Hand Tool

Warranty / Certifications

Manufacturer Warranty
Limited Lifetime Warranty

Questions & Answers

9Questions8Answers

How does it compare to the Bessey WS S+2K? From pictures they look identical

Asked by CWS August 9, 2020
0
Answers

What is the size of the pass-through on the "back" side? Would it work for a T-joint with 2x (1....

Asked by bay June 1, 2020
1
Answer

Hi Bay, you can do T-joint. The pass through is 1 1/8" = 1.125

Where is this made?

Asked by Jeff May 25, 2020
1
Answer

This is made in USA.

What is the black spacer (with measurements ) used for?

Asked by Denny January 3, 2020
1
Answer

The black space with measurements is used as a ruler, it will have inches and millimeters.

Is the body construction made of plastic or metal?

Asked by Zags November 4, 2019
2
Answers

Mixed metal and plastic. Piece of junk made in China. Dewalt wouldn't replace item that arrived broken from homedepot.com.

Could the two pieces to be jointed has different thickness?

Asked by lonestar August 31, 2019
1
Answer

Yes, they can.

Would I need 2 of these to firmly hold 1x12 lumber for a butt joint 90 degree corner?

Asked by Fc December 2, 2018
0
Answers

what is the jaw 0pening

Asked by eddy September 18, 2018
1
Answer

The jaw opening is 2 inches.

I would like to make a gate frame using 2x4s laid flat with ends cut at 45 degrees. I see this cl...

Asked by Jones April 19, 2018
1
Answer

We do not currently manufacture a clamp that will work for this application.

Customer Reviews

  • 29 Customer Reviews
  • 4.2 out of 5 stars overall
100% of customers recommended.
Overall Ratings
5star-icon(15)
4star-icon(9)
3star-icon(1)
2star-icon(2)
1star-icon(2)
Sort By:
Great product from the view of an active DIYer Quick Review: This clamped worked well for my pro...
Quality :
5
Value :
5
Seeds Program Review
(What's this)
Great product from the view of an active DIYer Quick Review: This clamped worked well for my projects. Held my work pieces together and straight ( I used 2 -2x lumber) More In depth review: I used this clamp on 2 pieces of 2x12 lumber. At first I felt that the clamps were too obtrusive, the large body made it difficult to get to the work piece to screw it in. I am used to the other types of corner clamps, with a much more leaner structure. Once I realize that the large body was a help and not a hindrance, I truly appreciated the clamp. Look at the picture for a better understanding. If you are clamping two pieces with the same thickness, all you have to do is screw in between the clamps, this allows you to accurate gauge where the center is to ensure a proper fit. The grip to loosen and tighten it is very comfortable and feels like a screwdriver. This comes with a black plastic spacer, which I will use for other projects as a spacer, like for decks and etc. Table Clamps: The table clamps worked well, properly securing the clamp to my table. You can clamp the clamp to your table from one of two ways.
Was this helpful?
6
0
DEWALT 90° Angle Clamp is one of the better designs available for these clamps. Its of heavy duty...
Quality :
4
Value :
4
Seeds Program Review
(What's this)
DEWALT 90° Angle Clamp is one of the better designs available for these clamps. Its of heavy duty construction, the body is a metal casting with a metal screw and a solidly done rubber covered handle. The screw thread goes into a polypropylene housing and is rated at 250 pounds of force that's plenty, but I'd be careful to only hand and not way over tighten it. The screw pivots in the body so two dissimilar board thicknesses can be accommodated in the join. The clamp has four holes on the bottom and comes with two small clamps to attach it to the workbench in either direction, if needed. It can also be used on cabinets or boxes in place without the workbench clamps. For cabinets and bookcases its capable of clamping both right angle joins as well as T-joins. The clamp is fully adjustable with a two inch throat and mentioned pivot-able screw to accommodate different board sizes. Since the clamp design is open ended it can handle any size board length. I checked this clamp out by attaching it to my workbench and tried different length boards and different thicknesses with good results.. The clamping action is excellent and hold's solidly with no play after its tightened down. The two small workbench clamps did a fine job keeping everything from moving around and it all felt secure. I think this is a great clamp for its intended purpose and the two inch throat is a good size for most uses.
Was this helpful?
4
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Was this helpful?
0
0
Was this helpful?
0
0
Was this helpful?
0
0
Absolutely great! I could finally make my big frames tight...
Absolutely great! I could finally make my big frames tight and truly 90 degree.
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Solid clamp and was useful for what I needed...
Solid clamp and was useful for what I needed
Was this helpful?
0
0
All metal body with a nice rubberized handle for a...
All metal body with a nice rubberized handle for a good firm grip. Thick coat of paint and clamps down firmly. Performs as described. Good value.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers