#1 Home Improvement Retailer

Internet # 204073450

Model # DR42114

1/2 in. Flush Trimming Bit

  • Use on portable or table-mounted routers
  • Cuts all composition materials, plywood, hardwood & softwood
  • TiCo Hi-Density Carbide for flawless finishes and longer life
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

Diablo's Bearing Flush Trim Router Bits provide a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Featuring TiCo carbide with titanium, these bits provide a long cutting life and ultra-fine finish. Perma-shield, Diablo's high performance coating, reduces friction and build-up on the bits. The bits kick-back reducing design allows for safer, more controlled cuts. These bits are computer balanced for a smooth and accurate cut. All Diablo router bits feature exceptional quality, unmatched precision and maximum cutting life.

Highlights

  • For trimming laminate counter tops and doing pattern work
  • Cuts all composition materials, plywood's hardwoods and softwoods
  • Use on portable or table-mounted routers
  • Red router bits are a registered trademark of Freud America, Inc.
  • Return Policy

Product Information

Internet # 204073450

Model # DR42114

Additional Resources

Shop All DIABLO

Specifications

Dimensions: H 5.75 in, W 2.38 in, L 3.625 in

Dimensions

Cut Radius (in.)0.5 inProduct Height (in.)5.75 in
Product Length (in.)3.625 inProduct Width (in.)2.38 in
Shank Diameter (inch)1/2 inch

Details

Individual/SetIndividualNumber of Flutes2
Number of Pieces1Returnable90-Day
Router/planer typeLaminateSelf-FeedingNo
Tools Product TypePower Tool

Questions & Answers

23Questions
caret
Q:what type of bit can cut a two inch thick table top into a 1 1/2 thick table top?
by|Oct 29, 2023
1 Answer
Answer This Question

A:  A PLANER

by|Feb 21, 2024
    caret
    Q:What is the country of origin?
    by|Sep 19, 2023
    0 Answer
    Answer This Question
    caret
    Q:Is it suitable to cut aluminum?
    by|Aug 29, 2023
    1 Answer
    Answer This Question

    A:  Yes!

    by|Oct 10, 2023
      caret
      Q:Like everyone else, What is the lenght of cut. Why don't you tell us that? But then again I have et to see that in any these.
      by|Aug 24, 2023
      0 Answer
      Answer This Question
      Showing 1-4 of 23

      Customer Reviews

      4.3 out of 5
      • 4.3 out of 296 reviews
      • 84% recommend this product
      Filter by:
      Showing 1-10 of 296 reviews
      Used trimming 3/8” bead board and it did fantastic.
      by
      • Verified Purchase
      Bad bearing
      Iv bought about a dozens of these over the year for laminate use. The bearing always wears and breaks well before the bit gets dull iv ruined too many pieces of laminate to continue using it's pretty frustrating to have it break after an hour of use after paying 30 plus for it
      by
      Response from DiabloProductExpertMar 6, 2023
      Hi, Jake! Thank you for taking time to share. We sincerely want you to have the best experience possible, so please reach out to us at https://www.diablotools.com/contact
        2 found this review helpful
        Bad bearing
        Bit worked great out of the box, but after less than 200' of use, the bearing got stuck. Did not realize this as the router started to wobble and leave an uneven cut - thought it was simply the guide surface until I started smelling burning wood. looked like the bearing started rapidly spinning with the bit and the friction had been causing it to jump, until it got hot enough to burn into the wood.
        by
        Response from DiabloProductExpertMay 24, 2021
        Thank you for posting, Nick! We're especially glad you did because it sounds like your experience fell short of expectations. Please contact us and we'll sort this out together: call 800-334-4107 or email customerservice@diablotools.com. We can help!
          1 found this review helpful
          Bearing on bit fell out 12 feet into my cut....
          Bit worked okay... had a little bit of tear put but ill leave that to user error. However, the bearing fell off 13 feet into my cut around the perimeter of an oak table and dug in... this is unacceptable. Luckily im able to remove the piece but still should never of happened in the first place. Tighten down that tiny bolt before use apparently the factory doesn’t.
          by
          Response from DiabloProductExpertMay 21, 2021
          Thank you for posting, Rob! We're especially glad you did because it sounds like your experience fell short of expectations. Please contact us and we'll sort this out together: call 800-334-4107 or email customerservice@diablotools.com. We can help!
            2 found this review helpful
            Do not buy this router bit, bearing fell apart after about 3 minutes of use on 3/4 plywood trimmi...
            Do not buy this router bit, bearing fell apart after about 3 minutes of use on 3/4 plywood trimming about 1/8" of plywood on new cornhole board.
            by
            Response from DiabloProductExpertJun 4, 2021
            We're genuinely sorry to see you've had such a challenging experience Dan. We take our customers’ feedback quite seriously and will be passing this on to the team for review. Please know we stand behind the quality of our products and want to make this situation right. Please contact us at your earliest convenience: call at 800-334-4107 or email customerservice@diablotools.com.
              4 found this review helpful
              Horrible Construction! Do not buy Freud Bits!
              I purchased this bit last night and began using it today, not 6 inches into cutting the bearing fell off and ruined my $200 countertop!!! I am extremely unhappy with the quality of this bit as it was brand new!
              by
                Great buy ! Used it to flush 1/4 inch maple...
                Great buy ! Used it to flush 1/4 inch maple strips laminated to veneer.
                by
                • Verified Purchase
                1 found this review helpful
                This flush trim router bit worked better than expected. I was able to trim through 1/2" thick ply...
                This flush trim router bit worked better than expected. I was able to trim through 1/2" thick plywood with ease and the result was a clean edge. Overall great product and I do not have any doubts regarding the long term durability.
                by
                • Verified Purchase
                • Recommended
                Built this display with this router bit.
                This is the best router bit on the market today. I use router bits all the time. They last the longest with the sharpest cutting.
                by
                • Pro
                • Recommended
                This flush cut router bit was high quality - cut through red oak like butter
                Building a bedroom set - the legs I built required a flush frame to attach the legs in line to the sides of the cabinets. Since I already built the face frames with a 1/4 in. overhang I needed to trim them flush. This bit was PERFECT.
                by
                • DIY
                • Verified Purchase
                • Recommended
                5 found this review helpful
                Showing 1-10 of 296 reviews