A: Hi Eric! To better address your concern, please contact our customer support team at https://www.diablotools.com/contact. We're here to help!
A: Hi Donald! Yes, the DR50102 can be used to rout ½” wide dado grooves, or wider grooves with multiple passes. Please note that this bit has a bearing above the cutting edges. This bearing can be used to follow the edge of a template or straight edge.
A: Hi Farley, the bit will plunge very well as long as you move the router forward along the cut path as you plunge. This is called “ramping”.
A: No, this will not. This is a flush trim bit which will bring two adjoining pieces of material to "flush". You can tell by the roller bearing at the bottom of the bit and the blade above being flush to it, A plunge bit will cut down into material for removing the inside part of something, it will not have a roller bearing at all.
A: This is a 1/4" shank
A: The shank is 1/4". Hope This helps.
A: The shank on this particular bit is 1/4".
A: The shank is 1/4 inch.
A: The shank is 1/4" in diameter.