Internet #100033809

Model #D1060X

Store SKU #881462

10 in. x 60-Teeth Fine Finish Saw Blade

  • Compatible with 10" miter saws, slide miter saws, & table saws
  • Cuts plywood, melamine, MDF, hard & soft woods
  • Little to no sanding rework required
  • See More Details

Frequently Bought Together

+
+
Price:
$3707

Product Overview

This is an image of Diablo's "Lead Never Follow"

Diablo Saw Blades

Dominate with Diablo large diameter circular saw blades for wood cutting applications.

This is an image of Diablo's optimized for corded or cordless saws claim.

Diablo Wood Cutting Blades

Are optimized for use in both corded & cordless table saws, miter saws, and radial arm saws.

This is an image of Diablo's TiCO manufacturing for increased performance and up to 5x longer life.

TiCO Hi-Density Carbide

Designed specifically to deliver extreme durability and up to 5x longer life.

This is an image of a Diablo ripping general purpose circular saw blade.

Ripping & General Purpose Saw Blades

Ideal for ripping and crosscutting in a variety of materials. Excellent when working on projects such as decking, framing, and building furniture.

This is an image of a Diablo combination saw blade.

Combination Saw Blades

Excellent when working on multi-purpose projects such as cabinet work, millwork and furniture construction. Delivers a smooth finish.

This is an image of a Diablo fine finish circular saw blade.

Fine Finish Saw Blades

Gives flawless crosscuts in wood. Excellent for trim work and projects such as building bookcases, cabinets, and shelving.

This is an image of a Diablo ultimate polished finish circular saw blade.

Ultimate Polished Finish Saw Blades

Produces precise, polished-like cuts equal to that of 220-grit sandpaper or higher. Flawless cuts with minimal rework… cut & done!

This is an image of a wood material application.

Ideal for

OSB and plywood cutting.

This is an image of a laminate material application.

Ideal for

laminate and melamine cutting.

This is an image of a MDF material application.

Ideal for

MDF cutting.

This is an image of a pressure treated wood material application.

Ideal for

pressure treated wood cutting.

This is an image of a hardwood material application.

Ideal for

hardwood cutting.

This is an image of a softwood material application.

Ideal for

softwood cutting.

Diablo's next generation 10 in. x 60 Tooth Fine Finish Carbide Circular Saw Blade features new laser-cut stabilizer vents for precise and clean cuts in a variety of wood materials. The advanced stabilizer vents feature a permanent filler baked in from top to bottom for absorbing noise and preventing sideways movement, allowing the blade to slice through wood cleanly, quickly and accurately. Constructed with TiCo Hi-Density special-blend carbide, Diablo's 10 in. fine finish blade produces precise cuts and provides 5X longer cutting life. The laser cut heat expansion slots allow the blade to expand and contract during use, keeping the cut true and straight. This blade is excellent for trim work and projects such as building bookcases, cabinets and shelving.
  • TiCo high-density carbide for increased performance and maximum cutting life
  • Perma-SHIELD non-stick coating for protection against heat, gumming and corrosion
  • Super-thin kerf design for fast and effortless cuts
  • New advanced laser-cut stabilizer vents absord noise and vibration, and prevent sideways movement for precise, clean cuts
  • Tri-Metal Shock Resistant Brazing to withstand extreme impact
  • Precision tensioning is a computer controlled process to keep the blade flat for a better quality finish
  • Precision Shear point tooth geometry for less splintering and tear-out
  • Laser cut heat expansion slots allow the blade to expand and contract without warping for straight and accurate cuts
  • Great for cutting hardwoods, softwoods, veneered plywood, melamine and MDF
  • Blade can be used on 10 in. miter saws, 10 in. slide miter saws and table saws (portable and stationary)
  • Red saw blades are a trademark of Freud America, Inc.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Height (in.)
10
Product Width (in.)
10 in
Saw Blade Diameter (in)
10

Details

Arbor Size
0.625 In.
Color Family
Red
Material Cut
Wood
Number in Package
1
Number of Teeth
60
Power Tool Accessory Type
Circular Saw Blade
Returnable
180-Day
Saw Blade Material
Carbide
Tools Product Type
Power Tool

Questions & Answers

32Questions36Answers

What is the kerf on this blade?

Asked by Guapo October 5, 2020
2
Answers

Approx. 1/8"

What type of oil is put on the blade for lube?

Asked by Joe July 4, 2020
4
Answers

I don’t suggest using any oil on a saw blade . Paraffin wax is most commonly used on saw blades .

is this good for cutting Laminate?

Asked by babak July 2, 2020
3
Answers

Yes, just remember to follow the safety rules.

Can this cut aluminum?

Asked by Noob June 9, 2020
4
Answers

Yes, I've used it to cut hollow aluminum bars (balusters, closet rods) before with no trouble. I usually tape the area I'm going to cut for a cleaner cut. No issues at all.

Can this be used with a Saw Stop table saw? Will the red coating prevent the Saw Stop's safety fu...

Asked by Yola October 23, 2019
3
Answers

Yes, you can use it with SawStop. The teeth of the blade are not coated, which is what matters the most.

can this blade be used on cement fiber board?

Asked by BKP July 6, 2019
5
Answers

No, this blade was made to cut wood, Diablo make blades to cut fiber board, Remember,do the right job, with the right tools!.

Can I cut aluminium with this blade with a mitter saw?

Asked by Chris July 1, 2019
3
Answers

You could, if you go slowly. But I would opt for the 80 tooth blade if that was what I was using it for.

Is this blade acceptable for cutting fly ash board such as Bolar TruExterior or siding cement boa...

Asked by larryo June 19, 2019
4
Answers

I would not use it for cement board. It is designed for fine cutting wood.

Is this blade good for a table saw to be used on wood paneling

Asked by Rob September 23, 2018
5
Answers

No you need a plywood blade for paneling..

Is this the best blade to use for cutting corian counter top?

Asked by steve September 17, 2018
3
Answers

If you're using a hand held circular saw, then no. You most likely need the 7 1/4" blade, not the 10"

10 in. x 60-Teeth Fine Finish Saw Blade - page 2

Customer Reviews

  • 4.8
    out of 741 reviews
  • 98% recommend this product
5star-icon628
4star-icon94
3star-icon9
2star-icon0
1star-icon10
Filter by:
Showing 1-10 of 741 reviews
Cuts smooth burrless clean cuts.
Cuts smooth burrless clean cuts.
by Punky4351
Baltic birch plywood is tough on saw blades. I use these because they last longer.
Baltic birch plywood is tough on saw blades. I use these because they last longer.
by soundpro
This is not the cheapest saw you'll find, but having tried others it is worth the money. So far I...
This is not the cheapest saw you'll find, but having tried others it is worth the money. So far I have had no burn marks, using on 3/4 Birch plywood. It cuts a very smooth line with no splinters on the bottom edge (you will always get some on the top edge but it's really minimal). This fit perfectly on craftsman miter saw.
by Minty1
First thing I do when I get a new saw is to install a new Diablo blade. I know there are more exp...
First thing I do when I get a new saw is to install a new Diablo blade. I know there are more expensive blades out there, but so far Diablo blades have never let me down. This blade was for my new table saw. I use a lot of plywood in my work and need as clean of cuts as I can, but also need a blade that can handle cross cuts on hardwoods as well. This blade does not disappoint, great cuts! This is a very reasonable priced blade that can be used for most your needs. I prefer fewer teeth for rip cuts, but I have done some with this blade and it held up pretty good there too.
by txgent10
1 person found this helpful
When compared to the factory blade that came with my table saw. This one cuts so much better with...
When compared to the factory blade that came with my table saw. This one cuts so much better with way less splintering. I also purchased them for my miter saw and circular saw.
by Papabearcraft
Installed on my Ryobi 10" Compound sliding miter saw. Cuts Great! Smooth finish and Fast! This is...
Installed on my Ryobi 10" Compound sliding miter saw. Cuts Great! Smooth finish and Fast! This is the Blade!
by Polebarnnorm
1 person found this helpful
I've been cutting 2X4's for shelves, and the cuts are very clean and easy.
I've been cutting 2X4's for shelves, and the cuts are very clean and easy.
by George
Best bang for the buck!!
I have a Delta table saw and have been using the factory blade for 6 months. As a wood worker, my products can be ruined by one bad cut. My Delta blade wasnt cutting like I needed and upgraded to the Diablo 60 tooth blade after reading all the positive reviews. might and day difference! cut fast and smooth with no tear out at all.
by American
I have the same blade that I have been using for about three years and it gets used almost daily....
I have the same blade that I have been using for about three years and it gets used almost daily. The cuts are always smooth with no tear out. I cut from pine, zebra wood, cherry, maple, olive, oak, poplar, mora and many more with no issues at all. These blades may cost more but they are well worth it in the long run. You won't be disappointed
by Picasso
19 people found this helpful
The Diablo bade is top notch. Clean cross cuts with limited tear out on all woods with proper fee...
The Diablo bade is top notch. Clean cross cuts with limited tear out on all woods with proper feed rates used.
by Ftwrthgeorge
Showing 1-10 of 741 reviews