Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Use the Diablo 17 in. White Buffer Pad with your power tool for productive performance. This white-colored pad measures 17 in. and is built to provide a long working life.
Dimensions: H 1 in, W 17 in, L 17 in
Product Height (in.) | 1 in |
|---|---|
Product Length (in.) | 17 in |
Product Width (in.) | 17 in |
Application | Floor Buffer |
|---|---|
Kit | No |
Power Tool Accessory Type | Sanding/Grinding/Polishing Accessory |
Returnable | 90-Day |
Sanding, Grinding and Polishing Accessory Type | Buffing/Polishing |
Tools Product Type | Power Tool |
This pad is designed for buffing/polishing, typically the final step before applying a finish coat, not abrading. It's the least aggressive pad available and is used for polishing, not sanding. Therefore, it doesn't have a sandpaper grit equivalent. For abrading hardwood floors before the final finish, you'll need sanding discs with appropriate grit levels depending on the current state of the floor.
I understand you're dealing with a very dirty unfinished wood floor due to pet waste and accumulated dirt and grease. Cleaning it thoroughly before sanding is essential for a good finish. Here's a suggested approach: 1. **Safety First:** Wear appropriate safety gear, including gloves, a dust mask, and eye protection. Ensure adequate ventilation in the area. 2. **Dry Clean:** Begin by thoroughly sweeping or vacuuming the floor to remove loose dirt, dust, and debris. 3. **Tackle Stains and Odors:** * **Pet Urine:** Use a specialized pet urine cleaner to neutralize odors and remove stains. Follow product instructions carefully. For stubborn stains, consider using a wood bleach solution (oxalic acid) following manufacturer's directions. Test in an inconspicuous area first. * **Grease:** Apply a degreaser suitable for wood to greasy areas. Let it sit for the recommended time, then scrub gently with a brush and wipe clean. 4. **General Cleaning:** Mix a solution of warm water and a mild wood cleaner (like Murphy Oil Soap). Apply the solution with a mop, scrubbing gently in the direction of the wood grain. Avoid soaking the floor. 5. **Rinse:** Rinse the floor with clean water to remove any remaining cleaning solution residue. 6. **Dry Thoroughly:** Allow the floor to dry completely before sanding. This may take several days depending on the humidity and airflow. Using fans can help speed up the process. **Important Considerations:** * **Severity of Contamination:** If the contamination is severe or the wood is heavily damaged, consult a professional floor refinisher. * **Wood Type:** Different wood types react differently to cleaning solutions. Always test in an inconspicuous area first. * **Sanding:** Once the floor is clean and dry, you can proceed with sanding. Start with a coarse grit sandpaper and gradually move to finer grits for a smooth finish. Remember, safety and proper preparation are key to a successful floor refinishing project.
This pad is non-scratch. It is a white buffing/polishing pad, which is the least aggressive in the Diablo pad selection. It's designed for polishing and buffing, not sanding, so it shouldn't scratch surfaces when used correctly. However, using it with harsh chemicals could potentially cause scratches, so it's recommended to use a gentle cleaning solution.
Hello, the Diablo 17” buffing pad will work on a 16” as long as the correct base attachment is used to hold the pad in place. There will be some excess pad showing as the Pullman is usually a 16” tool.
Viewing 1-8 of 17
4.4 out of 5