Internet # 203162331

Model # D0536X

DIABLO

5-3/8 in. x 36-Tooth x 10 mm Arbor Finish Circular Saw Blade

Name: 5-3/8 in. x 36-Tooth x 10 mm Arbor Finish Circular Saw Blade
Brand: DIABLO
SKU: 1000702039
Price: 17.13 USD
Availability: InStock
Rating: 4.8857 (70 reviews)

(70)Questions & Answers (11)

$17.13

Ideal for dewalt 5 3/8" trim saws and portable, low powered saws
Cuts 2x lumber, pressure treated, hardwood & OSB
Super thin laser cut kerf gives fast, durable, & clean cuts
View More Details

Product Details

Diablo's premium 5-3/8 in. x 36 Tooth Cordless Saw Blade has teeth made of Ti-Co high density carbide with titanium and cobalt for a design that is durable and long-lasting. Cut from Hardcore Steel with high precision lasers, the blade's ultra-thin kerf design provides fast, effortless cuts. Non-stick Perma-Shield coating protects the blade from heat and corrosion, reduces friction and pitch buildup. Laser-cut stabilizer vents absorb noise and reduce vibration for a cleaner cut and longer life.

Kickback reducing design
Super thin kerf design requires less power, thus extending the battery life of cordless saws and motor life of corded saws
Laser-cut thin kerf design gives fast, clean cuts
Laser-cut stabilizer vents for reduced vibration and precise cuts
Alternate top bevel (ATB) tooth geometry where the top bevel alternates from right to left providing for a smooth, clean cut
Durable TiCo high-density carbide teeth for razor-sharp cuts and longer blade life
Perma-shield permanent coating prevents gumming and corrosion
Covered by limited lifetime warranty
Diameter: 5-3/8 in.
Teeth: 36 ATB
Hook angle: 2°
Arbor: 10 mm
Return Policy

Additional Resources

From the Manufacturer

Questions & Answers

Q:Can this blade be used on my Ryobi cordless circular saw that came with a 5 1/2 in blade?

by|Oct 24, 2021

3 Answers

Answer This Question

A: no it can not

by|Jul 17, 2023

1 found this answer helpful

A: remember the size is the diameter of the blade--- so if only a 5 1/2 blade is the diameter of the opening of your saw then a 7 1/4 will not work

by|Jul 17, 2023

1 found this answer helpful

A: Hello Timitee! It should be not a problem but please be aware of a slight reduction of the cutting depth. Also please always follow the tool manual for safety instructions.

by|Jul 17, 2023

4 found this answer helpful

Q:Why dose one page say 12"� 60tooth $19. 95 then when I click on it it says 12"� 60tooth $ 46 what is it

by|Oct 18, 2021

0 Answer

Answer This Question

Q:Is it safe to use with a 3/8" arbor?

by|Apr 4, 2020

4 Answers

Answer This Question

A: Hi Rick, Thank you for your question. This blade is designed to use on a 5-3/8" saw with a 10mm arbor.

by|Nov 23, 2021

A: 3/8" = 9.5250mm so a blade with a 10mm center hole will fit on a 3/8" arbor. Is it safe? Yes

by|Apr 5, 2020

A: Yes. A 3/8" arbor is 9.525 mm, which rounds up to 10 mm. It'll work fine with no chatter.

by|Apr 9, 2020

A: Yes, I use it on a 3/8" arbor and 10mm = 25/64" which is 1/64" larger than 3/8"

by|Apr 4, 2020

Q:Can this blade be used to cut the bottom of a hollow core door without splintering the door surface?

by|Mar 9, 2020

5 Answers

Answer This Question

A: I purchased it for this exact purpose and had success. Just take your time and touch up the edge with sandpaper when you are done and it should be fine.

by|Mar 10, 2020

A: I would say no. You will need a blade that has more teeth. I would suggest a paneling blade. You may want to take a straight edge first and use a razorblade knife and scor each side of the door first. This blade is for rough cutting lumber.

by|Mar 10, 2020

A: I would recommend against it. This is a ripping blade, which will make quick work of it but does not leave a nice cut. Look for an 80-tooth blade or higher to get a nicer cut. Also, if you can put thin scrap on both sides of the cut or even tape, you will get a better result.

by|Mar 10, 2020

A: I bought this blade to do exactly what you are doing and it worked very well. But your experience may depend on the composition of your particular door. Why don't you do a test cut?

by|Mar 10, 2020

A: I would not use this blade, a fine tooth blade is better

by|Mar 10, 2020

Customer Reviews

4.9 out of 5

(70)

4.9
out of 70 reviews
100% recommend this product

Filter by:

Showing 1-10 of 70 reviews

Sep 13, 2023

Excellent service very good quality

Verified Purchase

Aug 31, 2023

Verified Purchase

May 18, 2023

Produces a very clean cut on plywood....

Produces a very clean cut on plywood.

Verified Purchase

Mar 9, 2023

It got the job done, nice clean cuts....

It got the job done, nice clean cuts.

Verified Purchase

Mar 8, 2023

Verified Purchase

Feb 22, 2023

Verified Purchase

Feb 8, 2023

Great Blade, even after cutting through nails.

I bought this blade because it fits my Ryobi saw I bought almost 12 years ago. I used the blade to cut plywood panels while building a Murphy Bed. During use I ended up cutting through a few small nails, and was able to continue finishing my project.

Verified Purchase

Nov 16, 2022

Only HD had this blade in stock

It's a Diablo blade, so it will be nice and sharp with smooth cuts

Verified Purchase

Recommended

Aug 11, 2022

Smooth cut, great finish!

Purchased to fit a 12V Milwaukee circular saw for an off-grid build. The blade runs true, and does a great job of cutting. Finish cut on cabinet-grade plywood was better than other brands of blades. Would reccomend and buy again.

Verified Purchase

Recommended

Aug 10, 2022

The arbor is 10mm, not those that has adopter rings...

The arbor is 10mm, not those that has adopter rings to fit a variety of saws.

Thank you for taking time to share! Please know that we take our customers’ feedback seriously and will be sharing this with the team for review. In the meantime, we’d love to further discuss your experience. When you have a moment please reach out to us at: https://www.diablotools.com/contact

Verified Purchase

0/0

Explore More on homedepot.com

See All Servies

Internet # 203162331

Model # D0536X

DIABLO