9 in. Carbide Pruning and Clean Wood Cutting Reciprocating Saw Blade (2-Pack)

A:  Nonsense. A finer tooth blade bogs down a saw in wood in almost every application. The small TPI allows wood chips to be discarded instaed of building up in between the teeth. These Diablo Demon pruning blades are the best pruning blade available.

A:  My saw has done fine with these blades. A carpenter may have a more in-depth analysis, but I can tell you my saw is fine. I've used these blades for a couple of years now. Best wishes :)

A:  Maybe if you?re using a Harbor Freight reciprocating saw. Use the blade what it?s designed for, let the saw do the work and you?ll be fine.

A:  yes, real good

A:  You mean to tell me you?ve never used a blade other than Milwaukees? You better put that tool away and read your manual entirely and watch yourself some YouTube videos on how to use your saw before you get hurt.

A:  Yes, works great with Milwaukee Sawsall.

A:  To better address your concern, please contact our customer support team at https://www.diablotools.com/contact. We're here to help!

A:  Yes they do.

A:  yes

A:  Yes. They will work very well. To avoid excessive wear on the blade,I would avoid as much dirt and stones as possible. I've used mine to cut roots sticking out in the surface of my lawn. Just dig around the root where you need to make the cuts.

A:  Yes, I used for water oak roots same size.

A:  Hi Mark! Yes, these will work for live oak roots, just make sure they are dug out and control the cut. Thanks for the great question!

A:  They should work but I would buy the 12" blades if I were you. I used the 12" blades for removing tree roots in the yard and also removed an area of hedges. I was able to stick the blade all the way in the ground and cut out all of the root system.The blade would still cut other stuff after that. I am amazed with these blades.

A:  YES, BUT YOU NEED TO DIG AROUND THE ROOT AND CLEAN IT WITH A HOSE AND NOZZLE. THAT WAY THEY WILL LAST.

A:  Yes it should i used on hazelnut, fir and black walnut

A:  Can't say I have dealt with Live Oak roots, but the Diablo blades with their carbide tips should work quite well. My suggestion-- go slowly and let the blade do the work. I've found that dividing a large cutting job into smaller parts/pieces makes it possible to tackle a fair sized cutting project.

A:  Yes, the blade will work. Oak being a hard wood will take a little longer. Just be patient and continue to apply pressure until it cuts through. Good luck.

A:  Cut through some 12 + inches of mesquite stumps for me!

A:  These blades are great. They will definitely work. I would try and remove the dirt around the root especially if it is rocky so the blade doesn't dull as fast. Also you might want to research removing roots because that is a good size root. I understand your frustration with the driveway but also want the least amount of damage for the tree.

A:  I purchased a 2 pack as stated above.

A:  They must have shipped the wrong item as mine came with two blades! Call and ask for them to fix the problem. They will!

A:  I ordered 2 packs four times (twice 9 , twice ordered 12 ) for home delivery. All 4 orders included only 1 blade. Was hassle to get corrected both via calling H.D. online and going in person to my local HD store.

A:  Hi AJ! To better address your concern, please contact our customer support team at https://www.diablotools.com/contact. We're here to help!

A:  Went to the local store and the package at this price only had one blade. It bought it anyway since it was competitive with similar Milwaukee blades. I've been using Diablo for years and they're great blades.

A:  No the one i have was a 2 pack

A:  Most likely mispacked. Return back to Home Depot for exchange or replacement.

A:  I also got just one blade. What's up with this? If it's one blade, then correct the online description.

A:  2 is correct. The package came with a extra free blade.

A:  I only received one blade and had to contact HD customer care to resolve.