Internet #301697672

Model #DS0903CP3

Store SKU #1002558204

9 in. Carbide Pruning and Clean Wood Cutting Reciprocating Saw Blade (3-Pack)

  • Compatible with all corded and cordless reciprocating saws
  • Carbide blade ideal for pruning/clean wood cutting application
  • Carbide teeth for 50x longer life vs. standard bi-metal blades
  • See More Details

Frequently Bought Together

+
+
Price:
$2039

Product Overview

This is an image of Diablo's reciprocating saw blades, cuts more.

Diablo Carbide Reciprocating Saw Blades

Ultimate cutting performance, greater durability & superior life in both wood and metal cutting applications allowing you to cut more on the jobsite.

This is an image of Diablo's cut more, do more, save more.

A Carbide Reciprocating Blade for Every Application

Do more on the jobsite with Diablo’s full range of Carbide Reciprocating Blades for wood and metal.

This is an image of save more, one Diablo blade has up to 50x longer life vs standard bi-metal blades.

Diablo Carbide Reciprocating Saw Blades

Provide up to 50x longer life vs standard bi-metal blades.

This is an image of pruning and clean wood material applications.

Pruning & Fast Clean Wood Carbide Blades

Ideal for use in pruning & clean wood applications.

This is an image of nail-embedded wood material application.

Nail-Embedded Wood Carbide Blades

Ideal for use in clean wood & nail-embedded wood.

This is an image of Diablo's metal and general purpose material applications.

General Purpose Carbide Blades

Ideal for use in clean wood, nail-embedded wood, metal 3/32”-1/4”, plastics, angle & tubing.

This is an image of stainless steel, cast iron pipes, and other metal material applications.

Metal Carbide Reciprocating Blades

Ideal for use in stainless steel, cast iron pipe, pipe, high-strength alloys, stainless sheet, sheet steel, copper, angle & tubing.

This is an image of a Diablo 9" carbide pruning and clean wood reciprocating saw blade.

Pruning & Fast Clean Wood Carbide Blades

The 3 TPI design has large blade gullets for easy and fast chip removal.

This is an image of a Diablo carbide 9" nail embedded wood reciprocating saw blade.

Nail-Embedded Wood & Reciprocating Blades

5/7 blade variable tooth design provides faster cuts with less vibration in nail-embedded wood.

This is an image of Diablo's 9" Carbide general purpose reciprocating saw blade.

General Purpose Carbide Reciprocating Blade

Unique plunge tip design with 6/9 TPI enables faster and easier plunging in wood. Also cuts metal from 1/8”–3/8”.

This is an image of a Diablo 9" thick metal carbide reciprocating saw blade.

Thick Metal Carbide Blades 3/16”- 9/16” Thickness

8 TPI features enhanced carbide tip to blade connection for extreme impact resistance.

This is an image of a Diablo 9" Carbide medium metal reciprocating saw blade.

Medium Metal Blades 1/16” - 1/8” Thickness

10 TPI tooth geometry for clean/ smooth finishes on medium metal applications.

This is an image of Diablo 9" and 6" thin metal carbide reciprocating saw blades

Thin Metal Blades - Less than 1/8” Thickness

20 TPI for greater durability and cutting performance in thin metal.

Diablo's new Demo Demon Carbide pruning and fast clean wood blades feature an aggressive carbide tooth geometry for an unmatched 50 times longer cutting life, faster cuts and increased productivity in pruning and clean wood cutting applications. These industry first carbide blades are designed with large gullets and a strengthened, oversized blade body for fast chip removal in extreme cutting applications. In addition, these radical blades feature Perma-Shield non-stick coating to prevent gumming and friction for fast, effortless cuts in some of the toughest wood cutting scenarios.
  • Diablo's industry first carbide pruning blade
  • Carbide cutting edge for up to 50X cutting life versus standard pruning blades
  • Ultimate cutting performance in clean wood and pruning applications
  • Aggressive carbide tooth geometry delivers fast and effortless cuts
  • Large blade gullets between teeth provide fast chip removal
  • Perma-SHIELD non-stick coated for less gumming and friction
  • Strengthened, oversized blade body for extreme cutting applications
  • Red saw blades are a registered trademark of Freud America, inc

Specifications

Dimensions

Blade Length (in.)
9
Blade Width (in.)
1"

Details

Color Family
Red
Demolition
No
Material Cut
Wood
Number in Package
3
Number of Teeth
54
Power Tool Accessory Type
Reciprocating Saw Blade
Returnable
180-Day
Saw Blade Material
Carbide
Teeth Per Inch
3
Tools Product Type
Power Tool

Questions & Answers

12Questions46Answers

Will this work on a Worx reciprocating/jigsaw

Asked by gramma September 16, 2020
2
Answers

Actually it does work on it.

Is this blade compatible with the WORX Reciprocating Saw?

Asked by Philip May 26, 2020
5
Answers

Yes! This blade is compatible with the WORX Reciprocating Saw. I have the WORX myself, and this is the blade I bought for pruning. It slips right in and it's fantastic!

How long is the coating supposed to last? Mine came off almost immediately.

Asked by thomas May 23, 2020
4
Answers

I was amazed how effective they cut through medium size trees. A lifesaver because I have bad luck with chainsaw chains falling off

Would this be able to cut a railroad tie?

Asked by BrysenMicklonis May 1, 2020
5
Answers

Yes if used from multiple sides.

Is this blade suitable for cutting small stump roots through dirt, without significantly dulling ...

Asked by Rookie April 21, 2020
5
Answers

I used it to segment and remove a large oak stump in the ground. I could not guarantee 20, 6" to 8", stumps, but it works much better than the Milwaukee 12" pruning blade (of which I dulled several rather quickly in my effort). However it is more brittle and thus you do not want to subject it to bends or bending forces, or it will break at the saw attachment tang. I was satisfied with how well it remained sharp overall in comparison to the Milwaukee pruning blade and it sure beats a chainsaw working in dirt.

Would this work much better on large diameter pecan limbs than the less expensive Diablo DS1205FG...

Asked by HomieDePo February 24, 2020
5
Answers

Not sure, but it cut a live 8 -10 inch tree with no issues.

Is this good for cutting logs 12 inch round in half and live tree limbs?

Asked by Bob February 21, 2020
5
Answers

I would say great for limbs, and it should work on logs but will probably take a little maneuvering.

Is this bade good for cutting thin tree branches. I tried and it would go threw. Are the teeth too large?

Asked by Andi August 12, 2019
5
Answers

Thin branches will vibrate so you must cut them close to the tree trunk

How does this compare to the Diablo Pruning blades, DS0905FG5, 5-pack? I need to do some extreme...

Asked by Pasquale December 24, 2018
5
Answers

I would recommend the 9 inch blades as the extra length allows you to cut limbs up to about 12 inch in diameter by moving the saw blade around the limb. I've used these blades in a battery operated saw and it works well. When you use it with an electric saw these blades will easily cut through big limbs with ease. I also have a battery operated chain saw and it doesn't cut nearly as well as the Diablo blades do.

Will this fit a ryobi cordless saw

Asked by Miked August 22, 2018
5
Answers

If the rest of your blades fit, this is a standard end for sawzalls. It'll fit.

9 in. Carbide Pruning and Clean Wood Cutting Reciprocating Saw Blade (3-Pack) - page 2

Customer Reviews

  • 1037 Customer Reviews
  • 4.7 out of 5 stars overall
95% of customers recommended.
Overall Ratings
5star-icon(803)
4star-icon(137)
3star-icon(47)
2star-icon(17)
1star-icon(33)
Sort By:
My wife and I concluded that a small tree in our yard needed to be cut down (it was dead). We al...
My wife and I concluded that a small tree in our yard needed to be cut down (it was dead). We also concluded that a cordless reciprocating saw would be the best way to approach the situation. I purchased these Diablo blades to go with saw. Very glad that I made that choice. My wife decided to take on the tree chopping duties herself and before I knew it, the tree was in pieces on the ground. The blade (9 inch version) went through the branches like butter. My wife was very pleased with the tool and the blade. Now she is using the saw with the same blade to attack a very overgrown lilac. It's still cutting great. Since the first blade from the package is still in use, I suspect that this 3 pack will provide us with a lot of pruning power before more blades are needed. I can't speak as to use of these blades in other cutting applications, but for pruning, they are the best I've seen. Highly recommended.
Was this helpful?
1
0
Great product
Just cut down an orange tree with this blade. Great saw blade, ripped through the wood very easily
Was this helpful?
0
0
I recomend
Despite the bad reviews i took a chance to give one,it works
Was this helpful?
2
0
Used this blade with saw all to cut up a large palm tree stump.Worked well and accomplished what ...
Used this blade with saw all to cut up a large palm tree stump.Worked well and accomplished what I wanted.2 blades removed 10 "cutting horizontally and vertically.
Was this helpful?
0
0
Worked good at first, broke first use though
I used this blade for cutting the roots of stumps. My first stump it worked great. It reached far underground and cut fast. Halfway through the second stump the blade broke at the end you insert it into the tool. So it became useless. I didnt bend the blade while using it at all. Maybe i did something wrong. I put a milwaukee 9in wood blade on there and it cut like butter I will probably buy it again if i need it.
Was this helpful?
0
0
I suggest you forget about the other brands and pick up a pack of these if you want to get the jo...
I suggest you forget about the other brands and pick up a pack of these if you want to get the job done. They got the teeth to rip through everything and will outlast any other blade you want to compare them with.
Was this helpful?
1
0
These blades are fantastic! I've used them for years for general pruning, but the last thing I d...
Quality :
5
Value :
5
These blades are fantastic! I've used them for years for general pruning, but the last thing I did a few days ago was used one of these blades to cut out a stump...it's a work horse! The roots still had dirt around them and this blade kept cutting the cherry wood roots like it was nothing! I was going at it for over a 3/4 hour! Try that with a chainsaw! LOL This blade is very fast cutting as you can see the size of the teeth in the pic below, but it doesn't leave a ragged cut when you're trying to use it for trimming.
Was this helpful?
16
0
These blades are fantastic! I've used them for years for general pruning, but the last thing I d...
Quality :
5
Value :
5
These blades are fantastic! I've used them for years for general pruning, but the last thing I did a few days ago was used one of these blades to cut out a stump...it's a work horse! The roots still had dirt around them and this blade kept cutting the cherry wood roots like it was nothing! I was going at it for over a 3/4 hour! Try that with a chainsaw! LOL This blade is very fast cutting as you can see the size of the teeth in the pic below, but it doesn't leave a ragged cut when you're trying to use it for trimming.
Was this helpful?
6
0
Great blade for pruning trees. This is at least the third one I've purchased because they do bre...
Great blade for pruning trees. This is at least the third one I've purchased because they do break at the base where they insert into the saw because that is the weakest point but I still get a lot of use from them. I attach the saw to my pruning pole with large hose clamps to reach high branches.
Was this helpful?
3
0
The diablo carbide pruning blade cuts faster cleaner on thick branches or logs. Highly recommend ...
The diablo carbide pruning blade cuts faster cleaner on thick branches or logs. Highly recommend for diy .
Was this helpful?
1
0
Review this Product
Share your thoughts with other customers