|Diameter (in.)||1/2||Product Depth (in.)||1.5 in|
|Product Height (in.)||2.75 in||Product Width (in.)||1.5 in|
|Color Family||Blacks||Drip Irrigation Fitting Component||End Cap|
|Irrigation System Component||Cap||Material||ABS Plastic|
|Manufacturer Warranty||3 Year Warranty|
A: The diameter is slightly larger on the Q60 0.710" The Q58 is 0.700" So you really need to verify your supply hose size. I think the 0.700" is the most common size. All of the fittings that are 0.710 have the blue insert in the connection sleeve.
A: “Goof” plugs (#G79B) can be used to plug holes in the ½” poly tubing, or to close off the end of the ¼” micro-tubing. Please see this link for more information: https://www.homedepot.com/p/DIG-Goof-Plugs-20-Pack-G79B/100126681 If this is not what you are looking for please call us at 1.800.322.9146 to speak with DIG Pro over the phone.
A: It sounds like you are trying to plug a 1/4" line. If that's the case this will NOT work. This is meant to plug the ends of the 1/2" main lines. The primary use for these is to open the lines and drain them during winter in cold freezing climates.
A: Yes, It is designed so you extend the line is you want.
A: Yes, it is standard garden hose thread.
A: Yes, it will fit and cap a garden hose.
A: Yes, you can remove the threaded cap off the end of our Q58 end cap and attach a garden hose if needed. If you have any further questions, please contact our technical service/product support line at 1-800-322-9146.
A: Yes you can
A: Yes, works great
A: Maybe you can take the end cap to cap off the soaker hose. I used it to cap the end of drip irrigation line that’s on a timer. I have also used the end piece to replace the cap on the irrigation valve that works on my timer. Hope this was helpful.