|Name||Landscape Drip Watering Kit||Raised Bed Garden Drip Irrigation Kit||Proven Winners WaterWise Drip Irrigation System||All-in-One Garden Watering Kit|
|Included||Pressure Regulator,Tubing,Tubing Clips||Backflow Preventer,Pressure Regulator,Tubing,Tubing Clips||Garden Hose Connection,Tubing,Tubing Clips|
|Kit Type||Drip Hose Bib Kits,Drip Irrigation Kit||Drip Hose Bib Kits,Planters||Drip Irrigation Kit|
|View Product||View Product||View Product||View Product|
Yes you are able to use a garden hose with this kit. All you would need to do is install the backflow preventer and pressure regulator that are included in the kit directly on your faucet. Then connect the garden hose and connect the swivel compression adaptor to the other end of the garden hose. If you have any further questions please contact our Technical Service/ Product support team at 1-800-344-1172.
Yes using our .700 OD compression tee C35 or our universal nut lock tee C55 you can connect to your existing poly drip tubing. The only thing to note is the maximum flow of the ½ inch poly drip tubing at 25 PSI is around 220 gallons per hour. I would recommend adding up the flow rate of the emitters you have on your existing drip system and subtract that total from 220 gph to see if your remaining flow is sufficient for the raised beds you are looking to irrigate. If you have any further questions please contact our technical services/ product support department at 1-800-344-1172.
It has a connector compatible with a hose faucet, so it should work with a hose as well.
Yes this kit should be available at your local store down the plumbing aisle. If you have any further questions please give our technical service/ product support team a call at 1-800-344-1172.
The ML50 kit does not include any individual drip emitters, it includes a 50 foot roll of ¼” dripline also known as microline with .65 gph drip emitters installed every 9 inches. Now you can always add drip emitters to the kit if needed we have them available in a variety of flow rates. If you have any questions on the installation of this kit we do have 2 videos detailing the installation of the ML50 kit. https://www.digcorp.com/homeowner-drip-irrigation-products/ml50-raised-bed-drip-kit#video_articles
The ML50 kit includes a 50’ roll of .700 OD poly tubing. If you need to add more ½” tubing to this kit you want to make sure the tubing is .700 outside diameter. If you have any other questions please contact our technical service/ product support team at 1-800-344-1172.
I hooked mine up to a rain barrel that is on cinder blocks. It can water at a slow rate when the barrel is fairly full but only the first few offshoots. It does not have enough pressure for any sprinkler attachments or lines that are far from the source.
Yes, it's safe
you need 0.700 OD for this package
No, that's a special attachement that you can buy separately