Garage Door Hardware Installation Kit (for 16 ft. x 7 ft. Doors)

A complete, heavy-duty hardware kit for a new install, repair of old door, or upgrade to an existing door. Model # DLK16 Internet #306238186 DURA-LIFT Garage Door Hardware Installation Kit (for 16 ft. x 7 ft. Doors) This kit can be used for a new install, as long as you purchase the additional hardware and doors needed to complete the installation. I replaced key components of a very old garage door to improve the performance of the door. The nylon rollers quieted a lot of the noise made during opening and closing. The kit came with everything I needed to replace hinges, wheels, wire, screws, nuts bolts, etc... See itemized list and photo. I made a video showing how quick it is to remove the old hinge and replace it with a new hinge and roller. (https://youtu.be/Vb2VSqaUdbI) Don't pay for a high priced repair when with just a impact gun and a set of nut drivers you can do it yourself in just a few hours. NOTE: Replacing the torsion spring and cables require extreme care. MANUFACTURER COMMENTS - Universal fit - 1 year manufacturer warranty - against defects or failures from the purchase date A complete, heavy-duty hardware kit for 16 ft. x 7 ft. doors COMPONENTS - 11 x #1 Hinges (14-Gauge) - 2 x #2 Hinges (14-Gauge) - 2 x #3 Hinges (14-Gauge) - 2 x Top Brackets - 2 x Bottom Brackets - 1 x #5 Door Jamb - 1 x #6 Door Jamb - 2 x Flags 2 x End Bearings - 1 x Center Support - 10 x 13-ball Nylon Rollers - 2 x Drums 2 x 8 ft. Cables - 2 x Lift Handles - 1 x Plastic Bearing FASTNERS - 20 x Lag Screws (7/16 in. x 2 in. HH) - 4 x Lag Screws (7/16 in. x 2.5 in. HH) - 90 x Self-Tapping Screws (7/16 in. - 20 x 1 in.) - 16 x Carriage Bolts (1/4 in. - 20 x 5/8 in.) - 16 x Flange Nuts (7/16 in. - 20) - 12 x Tap Bolts (5/16 in. x 7/16 in. x 1 in.) - 12 x Flange Nuts (5/16 in. - 7/16 in.) - 2 x Tap Bolts (3/8 in. - 9/16 in. x 1.5 in.) - 6 x Carriage Bolts (3/8 in. - 16 x 1 in.) - 8 x Flange Nuts (3/8 in. - 9/16 in.).

All hinges from kit worked fine price was fair too

Is your garage door loud? Squeeky? Hard to roll up or down? Then consider this installation kit to rebuild your garage door. I installed the rollers and hinges from this kit onto our existing door and now it functions like new! A word of caution: The springs on a garage door are under an extremely large load! Do not remove the lower roller, cable, or spindles without first having the tension on the springs removed (this should be done by a professional as serious injury can result). As I said earlier, I installed the rollers and hinges from this kit but did not install the lower roller nor the other hardware as I could not release the tension in the springs. Plan on having my springs replaced by a Pro, at such time the remaining hardware will be installed. To replace existing hardware, remove only 1 hinge at a time. remove the screws from the old hinge, and install the new hinge in its place with the provided hardware. repeat this process until complete. Also make sure that the screws and hardware on your wind beams are secure and none are missing (this hardware not included) Overall, I am happy with what this kit offered and now my Garage door functions so much better than before!

The Dura-Lift garage door hardware kit is a good value and the quality is excellent. It is for completely replacing the hardware for 16 foot x 7 foot garage doors. As you can see from the photos it comes with 12 premium rollers, all the hinges needed, bearing brackets and rollers. It also comes with cables and a handle. It doesn't come with instructions, so you'll want to disassemble the old door and replace parts in the same sequence.

good quality hardware and a complete kit to replace existing or for attaching new door sections / panels. the rollers are ball bearing so they aid in keeping the noise level down, hinges are a standard grade you would find in an average home center. the other hardware seems to be quality items. this kit should be able to be used to replace or a new install on about 95% of residential sectional garage doors.

I would recommend this Garage door tuneup kit for someone with experience working on garage doors. Because of my limited experience work on garage doors, I can only replace only a few of these parts. Anything connecting to the springs will take proper training, experience and the proper tools. These parts are very high quality. This was shipped with only a label added to the box. The second picture shows all the parts that come in this package. The other pictures show that each part provided is a little different than the part on my current garage door, the rollers might be the only part I can replace, but replacing them should improve the garage door performance.

This product did NOT state that it was for a 2 panel door. I have a 5 panel door and there was not enough parts to replace all of the panels. I would buy the parts individually , if I were you. I only got 2 hinges that take rollers in them for each side. I have 5 on each side. Funny thing is, There were 5 roller wheels for each side. Why would they give you that many. If it was designed for two panel door. Never do that again.

Liked this garage door kit. Lots of part. It was all heavy duty .