34 in. L x 24 in. H Medium Fiberglass Encapsulated Tan Plastic Insulation Pouch

A:  Diana the best fit for these two backflows would be model 602 or 24 x 24 for the first one and 610 or 34 x 24 for the second size. regards

A:  Denny if you would be able to send a photo of the installation along with dimensions direct to Dekorra Products via their customer service link off their website www.dekorraproducts.com they will be able to assist in determine how to proceed with your application. regards,

A:  Yes, I bought mine a year or so ago. I bought this over the green one that HD has in their stores because it needed to be taller and longer. But it slips over the top and I have it anchored using the eyelets at the bottom.

A:  Yes I do have such a pouch. I recommend that you evaluate whether you will be able to pull the bag up far enough to ensure that you have proper insulation on top when you seal it. You might be able to supplement the top by purchasing some fiberglass insulation batting if it appears to be a problem.

A:  No. Mine is top down. Bottom is open.

A:  Yes. Purchased mine for sprinkler system Great insulation for the head unit I did put a strap around it to h Keep it in place for the wind

A:  A 34" long pouch will not fit your application. The pouch is 34" long in its unfilled condition. As soon as you open it up to insert your pipe assembly the length shortens appreciably. I know, I just made the same mistake. I bought a 24" pouch to protect my backflow preventer which has in/out pipes 23" apart. Not even close to fitting! I'd suggest using a cloth tape to measure around your filtration system at its widest point, add some extra length to allow for insulation thickness and a comfortable fit then divide by 2 to get the minimum length of pouch required. Don't forget to apply this method to the height as well.

A:  The bag has a length of 34” but the width opening is only about 2-3”. The 24” measurement is for height, so I don’ think it would work for you. It’s a slim, tall bag made to cover outdoor pipes.

A:  I guest one whose length is approx 24-26 inches. Height of 24 inches is fine.

A:  Jim, the recommendation for your well assembly would be the 48"L x 30" tall size. If you could send an email including a photo of the well assembly to info@dekorraproducts.com. Dekorra would then be able to identify the configuration and determine if another size would work better. thanks for your interest in the product line! Regards,

A:  The pouch I bought was for a backflow pipe. So thickness or width was not an issue. The pouch fits nicely over my backflow pipe. If the item you want to cover has width of 22” you may need a longer pouch to go around the well head.

A:  Thank you for your interest in our line! We can provide the inside dimensions however they vary depending on the overall height needed as well as width and length. If you can provide us with the item being covered as well as the overall dimensions we will cross reference our pouches with verifying fit. Regards,