|Connection size (in.)||3/8 In.||Extended Hose Length (in.)||59|
|Faucet Height (in.)||15||Spout Height (in.)||7.25|
|Cartridge Valve Type||Ceramic Disc Faucets||Color Family||Steel|
|Color/Finish||SpotShield Stainless||Commercial / Residential||Residential|
|Deckplate Included||Deckplate Included||Faucet Hole Fit||1,2,3,4|
|Faucet Hole Spacing (in.)||8 in. Widespread||Faucet Type||Pull Down|
|Features||Advanced Spray,Pull Out Spray Wand,Secure Docking,Spot Resistant||Finish Family||Stainless Steel|
|Flow rate (gallons per minute)||1.8||Included Components||Soap Dispenser,Supply Lines|
|Material||Metal||Mount Location||Deck Mount|
|Number of Faucet Handles||Single Handle||Returnable||90-Day|
|Sensor Activation||No Sensor||Spout Reach (in.)||9.38|
|Spout Swivel Type||360 Degree Spout Swivel||Style||Modern|
|Certifications and Listings||ADA Compliant,CSA Listed||Manufacturer Warranty||Limited Lifetime Warranty|
A: Hi Carola, thank you for your interest in the 19875Z-SPSD-DST! The part number for the pump is RP47888. Please contact. us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist
A: When the handle is straight up, it is cold. When it is down, it is hot. If you mount it the way you describe, straight up will be cold and you would lower it to the left for it to be hot and somewhere in between for a mix.. So I do not believe you can mount the handle on the front and get the results you are looking for.
A: I’m not sure on the center install it’s been a while since we put it in our kitchen. But up is cold and down is hot. Ours is on the right side and to turn on you push out to the right. So I dont think what your wanting will work with that. Hope that helps.
A: Hi Mike, thank you for your interest in the 19875Z-SPSD-DST! We recommend installing the Faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be the opposite of the standard operation for single-handle faucets. You could compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button on the handle will no longer indicate the correct temperature. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist
A: Have not tried, but do not see a limitation to doing so.
A: No, the lever operates at 90 degree angle. If you install it in the front you’re only going to turn the lever to the left for hot water and center for cold. You won’t be able to turn the lever left to right (or vice versa).
A: Hi Tony, Thanks so much for contacting Delta Faucet Company! The 19875Z-SPSD-DST does include a gasket, which is located on the counter under the faucet. This is used to prevent water from leaking under the faucet and below the counter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
A: Hi LAB24, Thanks so much for contacting Delta Faucet Company! This faucet features a flow rate of 1.8gpm at 60psi. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Sign up for emails & save 10% on select home decor. Valid on select items.