- For use with Dremel rotary tools (sold separately)
- Use this to skip collet changes and swap out attachments quickly
- Can be used with most 1/32 in. to 1/8 in. shank bits
- See More Details
Frequently Bought Together
Price:
$1090
Product Overview
A desirable companion for any applications that require frequent accessory changes, the Dremel 1/32 in. Multi-Pro Tool Chuck can be a handy supplement to your tool collection. Skip collet changes and swap out attachments on the fly with this tool chuck, which can house most 1/32 in. to 1/8 in. shank bits.
- Use with rotary tool models 4000, 400, 3000, 398, 395, 300, 285, 275, 200, 100, 8220, 8200, 800, 780, 770, 7700, 750
- Can be used with cordless Multi-Pro without changing collets
- Enables wrench-free attachment changes
- Also use with these Dremel instruments: 575 right angle attachment, 225 flex shaft attachment and 220 workstation
Info & Guides
Product Overview
- For use with Dremel rotary tools (sold separately)
- Use this to skip collet changes and swap out attachments quickly
- Can be used with most 1/32 in. to 1/8 in. shank bits
$11100
$123.97
Save $12.97 (10%)
Specifications
Dimensions
Diameter (in.)
.25 in
Product Length (in.)
1.5 in
Details
Accessory Fitment
Tool-Specific
Application Type
Cutting,Drilling,Grinding,Mortising,Polishing,Sanding,Scraping,Sharpening
Number of Pieces
1
Returnable
180-Day
Rotary Tool Accessory Type
Chuck
Tools Product Type
Power Tool
Questions & Answers
35Questions27Answers
Will this work with Dremel 395?
Asked by Mike October 28, 20185
AnswersI installed this chuck on my Dremel 12-volt lithium-ion variable speed cordless rotary tool and it work perfectly. I do not own a Dremel 395 but I would expect it to work just fine with that unit.
Will this work on a 200 series 2 speed rotary dremel
Asked by Chris March 6, 20183
AnswersI use mine on a dremel
Will this work on a Milwaukee cordless rotary tool ?
Asked by Chief April 1, 20183
AnswersYes, it fits perfectly and makes the tool much more convenient to use.
Compatible with a certian model?4000?
Asked by Add February 5, 20123
Answersyes
Whats the smallest drill size this chuck will accommodate?
Asked by Corey July 8, 20153
Answers1/32"
Can I use this to hold a bit 1mm in size?
Asked by Shane July 17, 20202
AnswersThe Dremel 4486 Chuck accepts our Dremel Rotary Accessories between 1/8" to 1/32" shaft size. For further assistance, please contact us at 1-800-437-3635, Monday - Friday, 8A-5P CST.
Will this work on my al-trade rotary Dremel
Asked by MrB February 21, 20162
AnswersThis chuck will work with most of our Dremel rotary tools.
Does it work with the 4200
Asked by Dustyrakk January 4, 20192
AnswersThe Dremel 4486 Chuck is not compatible with the 4200. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday-Friday, 8A-5P CST.
Will this chuck fit on my Dremel Micro cordless tool?
Asked by Lutz December 28, 20162
AnswersYes, the 4486 chuck is compatible with the Micro 8050.
will this fit to my dremel 395 type 4?
Asked by cesar January 12, 20162
AnswersUse with rotary tool models: 4000, 400, 3000, 398, 395, 300, 285, 275, 200, 100, 8220, 8200, 800, 780, 770, 7700, 750.
Customer Reviews
Overall Ratings
Dremel Provided Me The Max Life Cutting Wheel To Provide An Honest Review
October 15, 2020
If you are starting to invest in additions to any of the Dremel Rotary Tool Line I believe an investment in a 1/32 in. Rotary Tool Multi-Pro Chuck is well worth adding to your Rotary Tool. I use the Chuck with my EZ Lock Mandrel and its Attachments often in wood sanding and removing rust from any number of objects from small hard to reach spots while stripping the body of a Gas Grill to cleaning lawn and garden tools. Changing out the various grades of sanding attachments and the short life detailing an intricate item will use up such attachments quickly, I use the Dremel Chuck to keep a good flow to my work and keep from constantly having to take time out to prep a new attachment. I have used the Dremel Rotary Tool for the past 28 years, this was one of the two most welcome attachments I have found in that time for my Dremel.
Dremel Provided Me The Max Life Cutting Wheel To Provide An Honest Review
makes my Dremel fit any size bur or mandrel
August 4, 2020
makes my Dremel fit any size bur or mandrel
This chuck is easy to install and very easy to use. It holds the tiny drill bits I use for jewe...
April 30, 2020
This chuck is easy to install and very easy to use. It holds the tiny drill bits I use for jewelry making perfectly.
New chucks are more cheaply made
September 11, 2019
Customer review from dremel.com 
I needed a new chuck for my 4300 dremel tool. The current one got messed up through my own fault. The new chuck, #4486, is visibly smaller and less substantial than the original that came with the tool. I use the tool a lot for different jobs. Honestly, I don't know if the smaller size means it will not perform as well but, if I had to buy a similar tool, it would make me look at other vendors to see how they compared.
Response from ServiceSeptember 12, 2019
We appreciate your feedback. The chuck is smaller so it supports less run out on our different tools. We will contact you directly to better understand any issues you may have related to loss of performance. That should not be the case, so we would like to understand that.
Works Great!!
March 6, 2016
Ive read the reviews, and dont agree with most! Purchased this to hold a .04" (1.02mm) drill bit, and it works excellent. Common mistake, this replaces the collet(s), its basically a one size fits from 1/32" thru 1/8" shanks, so you can use it with most any dremel bits/shanks. It is not wrench free, you must use the shaft lock button and the dremel wrench to open and close the chuck. Works great for making PC Board projects.
Great idea, just one thing.....
September 12, 2014
Customer review from dremel.com
OK, I posted a review earlier on this. I was able to use my Monkey Wards tool to cut the chuck off of my Dremel 260. Here's what I found: The chuck was able to screw down far enough on the motor shaft, that it drove past the threads and seated on the larger shoulder of the motor shaft.
I ended up grinding off a little of the chuck, and then grinding a long taper on my Dremel's shaft. This allowed me to use the chuck without a problem (Plus a little grease on the threads).
Response from ServiceSeptember 13, 2014
We can't really recommend any kind of modification to get this to fit onto an older tool. And the chuck should not require lubrication.
THE CHUCK MAKES IT VERY EASY TO SWITCH OUT ALL...
January 15, 2021
THE CHUCK MAKES IT VERY EASY TO SWITCH OUT ALL DIFFERENT SIZES AND TYPES SO EASY....
Use with Milwaukee M12 multi tool makes using any bit...
January 10, 2021
Use with Milwaukee M12 multi tool makes using any bit easy and fast.
I bought this for my husband for Christmas. I knew...
January 9, 2021
I bought this for my husband for Christmas. I knew he wanted one, but he's the tool expert, so I took a chance with this particular one. I figured he could return it or replace it if it wasn't what he was looking for. He said it was more than perfect! It turned out to be better than the one he had picked out. It's a great tool and was well worth the price.
The one accessory a dremel can’t live without
December 29, 2020
Customer review from dremel.com
[This review was collected as part of a promotion.] This is by far the best thing you could possibly get it makes changing bits super easy no more key that always gets lost I will always use the keyless chuck as long as I use my dremel
It’s a lifetime thing
Review this Product
Share your thoughts with other customers
