#1 Home Improvement Retailer

Internet #

202349458

Model #

200-1/15

Store SKU #

847601

200 Series 1.15 Amp Dual Speed Corded Rotary Tool Kit with 15 Accessories and 1 Attachment

$4997
Apply Now
Pay $24.97 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Ideal for cutting, sanding, grinding, polishing, carving and more
  • 2-speed control switches easily between 15,000 - 35,000 RPM
  • Includes tool, 15 accessories, 1 attachment and accessory case
  • View More Details
Store
0 in stock
caret

Product Details

The Dremel 200 Series Rotary Tool offers the precision and control required to complete a wide range of projects. Two speed control allows you to set your speed at 15,000 or 35,000 RPM with a flip of a switch. The click-and-set on/off switch allows for precise speed selection. Use the low-speed setting for cleaning applications and using brush accessories and the high-speed setting for routing, cutting and sanding applications. The kit comes with 15 accessories including a lawn mower and garden tool sharpening attachment.

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

258Questions
caret
Q:It looks like the case only holds the accessories. Can the case hold the accessories AND the dremel tool?
by|Apr 22, 2023
2 Answers
Answer This Question

A:  This kit does not include a case, just the tool and accessories. You can buy a kit with a carrying case a link is below. https://www.homedepot.com/p/Dremel-3000-Series-1-2-Amp-Variable-Speed-Corded-Rotary-Tool-Kit-with-25-Accessories-and-Carrying-Case-3000-1-25H/203040434 Mike

by|Apr 24, 2023

A:  The Dremel 3000-1/24 Tool Kit includes a carrying case that will hold the tool, attachment and accessories. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday-Friday, 8A-5P CST.

by|May 19, 2023
    caret
    Q:I purchased a Dremel 3000, just a few months ago. I used my Cc. I don't have a receipt and can't find it on your website. I also called and was told tuff luck. Can you help me?
    by|Apr 3, 2023
    2 Answers
    Answer This Question

    A:  If you purchased at Home Depot and know the cc you used they should be able to refund you.

    by|May 20, 2023

      A:  For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday-Friday, 8A-5P CST.

      by|Apr 4, 2023
        caret
        Q:Does this need to be attached to a air compressor
        by|Dec 21, 2022
        3 Answers
        Answer This Question

        A:  no

        by|Dec 23, 2022

          A:  The Dremel 3000 is a corded rotary tool. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday-Friday, 8A-5P CST.

          by|Dec 22, 2022

            A:  No, it uses electricity.

            by|Mar 12, 2023
              caret
              Q:what is the wattage of dremel3000
              by|Nov 11, 2022
              1 Answer
              Answer This Question

              A:  The Dremel 3000 has an amp of 1.2. The watts are 144. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday-Friday, 8A-5P CST.

              by|Dec 19, 2022
                Showing 1-4 of 258
                caret

                Customer Reviews

                4.4 out of 5
                (1,629)
                • 4.4
                  out of 1,629 reviews
                • 88% recommend this product
                Filter by:
                Showing 1-10 of 1,629 reviews
                This Dremel is awesome, so precise and easy to use
                [This review was collected as part of a promotion.] So I own about 20+ dremels maybe and there are at most five that I absolutely love. The 200-1/15 is a great Dremel, just compact enough and it doesn't require a ton of Accessories. This Drem el was made to be easy to use and work with, an extra bonus I like is that it doesn't require any extra tools to change out bits, ofcourse you'll still need pliers but the rest is a sinch.
                by
                  • Recommended
                  Un-Topable
                  [This review was collected as part of a promotion.] Though any Dremel tool cannot be outshined, the 200-1/15 Two Speed Rotary Tool Kit is the apex of all rotary tools. Light enough to think you're holding air, heavy enough to know you're holding a precision instrument, the Two Speed Rotary Tool is a modelers talisman. I use it to fine tune my small, model trains; to craft intricate, scenery details; to perfect intimate structures. And, of course, there are many more uses for it.
                  by
                    • Recommended
                    Don’t buy! Poor Quality
                    Buyer beware! I’ve owned this tool (and $150 in accessories) for 6 months. Went to use it for my 3rd job today. It was a basic wood edge router with $35 in new router bits. The blue button chuck failed. It failed to the point that I was unable to remove the router bit. It just kept slipping. To finish my job I ended up taking the dremal apart to be able to grip the shaft. When I opened the tool I discovered that the chuck system was a small metal pin that presses into one of four holes in the shaft. The metal pin and holes were worn out and could no longer engage. What terrible design! I have maybe swapped out bits 10 times. The tool is totally unusable now. To change a bit I have to completely disassemble the entire tool...not good.
                    by
                      17 found this review helpful
                      It arived swiftly and worked perfectly out of the box. I look forward to really getting work done...
                      It arived swiftly and worked perfectly out of the box. I look forward to really getting work done with this rotary tool.
                      by
                      • Verified Purchase
                      • Recommended
                      Good Tool - Great Support
                      I've used this tool for about 2 years. I like it, but I recently ran into a problem with the bit locking mechanism because I'm an idiot and I tried to lock the bit with the tool on (DON'T DO THAT). I sent it in for repairs expecting an invoice, but they shipped back in two weeks in perfect working condition. They even called me when I forgot to include my return address. 10/10
                      by
                        • Recommended
                        2 found this review helpful
                        The Basic Dremels are AWESOME
                        The one thing this unit is missing is the variable speed option. 2 speeds seems like a cost cut measure. Hope they bring that back in the 200 series. I have one that is many years old, I am buying them used for friends kids. Every single household should have at least one! My wife loves hers, teamwork.
                        by
                          • Recommended
                          1 found this review helpful
                          Bought it to do my own acrylic nails it works great
                          Bought it to do my own acrylic nails it works great
                          by
                          • Verified Purchase
                          • Recommended
                          Very hand tool, I have used this for polishing tile, sanding wood, cutting metal and engraving. ...
                          Very hand tool, I have used this for polishing tile, sanding wood, cutting metal and engraving. The Dremel is basically a vertical drill or router with very high RPMs but has a low speed too. This kit comes with a good starter set of tools but there are many other sets you can get such as polishing and engraving. The tool is relatively easy to hold, just make sure you wear a mask and glasses as it has no guards. In this kit is a metal cutting blade I have used before and some sanding and polishing discs. This is a great tool to have for fine work in projects.Bits are fairly easy to add and remove.
                          by
                          • Recommended
                          1 found this review helpful
                          I have only used this once... However, I have a tendency to work my Dremel pretty hard during my...
                          I have only used this once... However, I have a tendency to work my Dremel pretty hard during my woodworking. I purchased this to replace my previous Dremel that was well over 10 years old. I hope this one is as good as my last... so far...so good !!!
                          by
                          • DIY
                          • Verified Purchase
                          • Recommended
                          1 found this review helpful
                          I used this to cut off two 3/8's bolt head's did the job without getting warm
                          I used this to cut off two 3/8's bolt head's did the job without getting warm
                          by
                            • Recommended
                            4 found this review helpful
                            Showing 1-10 of 1,629 reviews

                            Frequently Bought Together

                            Top Rated
                            +
                            +
                            Price:
                            $4997