#1 Home Improvement Retailer

Internet #206384731

Model #MM485U

Store SKU #1001554165

Store SO SKU #1001517371

Universal Dual Interface Carbide Flush Cutting Oscillating Blade

  • Universal blade fits all oscillating tools- no adaptor needed
  • Carbide provides 30X more cutting life in hardened materials
  • High performance carbide teeth can cut hard & abrasive materials
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Dremel Ultra Saw Logo with Saw

Leaders in Oscillating

Dremel offers high quality tools and universal accessory blades.

Dual Interface Icon

The Original Universal Dual Interface Blades

First to market with the only true universal accessory blades.

No Adapter Infographic

No Adapter, No Problem

Dremel Universal Dual Interface blades do not require an adapter as they are truly universal.

Top Interface Infographic

Universal U2: Top Interface

No matter the tool, Dremel Universal Dual Interface blades will fit your tool and get the job done.

Top Interface Infographic

Universal U2: Bottom Interface

No matter the tool, Dremel Universal Dual Interface blades will fit your tool and get the job done.

Accessory Change Infographic

Tool-Less Accessory Change

No wrench required.

Attaching Blade Infographic

Inserting Blades into Tool

Simply twist the knob, push it down and insert any Dremel accessory.

Material Icons

Versatility

Dremel offers a large assortment of Universal Dual Interface blades for any application.

Image of Carbide Blades

Carbide Cutting Blades

High performance Carbide teeth provide up to *30X life in hardened material vs. standard bi-metal oscillating blades. MM485U, MM485BU, MM488BU.

Image of Cutting Blades

Cutting Blades

A variety of cutting blades including Bi-Metal blades that have *15X more life. MM450U, MM480U, MM480BU, MM482U, MM473U, MM474U, *MM422U,*MM462U,*MM494U.

Image of MM14U Accessory and sanding paper

Hook and Loop Accessory System

The MM14U hook and loop accessory pad accepts Dremel sand paper and diamond paper.

Image of two Scrapers

Scrapers

The MM600U and MM620U removes caulk, coats of peeling paint and other soft adhesives.

Image of Grout Removal Blade

Grout Removal

MM501U and MM515U grout removal blades can be used for removing grout between wall or floor tiles for repair, remodeling or restoration work and more.

Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter. The unique dual interface fits all competitive Oscillating Tool, including those with a quick change feature. The Dremel MM485U universal carbide flush cut blade has high-performance carbide teeth designed to cut hard and abrasive materials like nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic wall tile and more. Its wide 1-1/4 In. blade speeds through long cuts and can make plunge cuts up to 1-11/16 in. D.
  • Universal dual interface directly fits all oscillating tools without the use of an adapter, excluding StarLock
  • Compatible with Dremel, Bosch, Makita, Milwaukee, Rockwell, DeWalt, Fein, Porter Cable, Ridgid
  • High performance carbide teeth provide up to 30X life in hardened material vs. standard bi-metal oscillating blades.
  • High performance flush cut blade-provides longest life and fastest cut of all Dremel flush cut blades
  • 1ST OSCILLATING CUTTING BLADE IN THE MARKET

Specifications

Dimensions

Product Depth (in.)
6.25
Product Height (in.)
5.5
Product Length (in.)
6 in
Product Width (in.)
1.25

Details

Accessory Fitment
Universal
Application Type
Cutting
Blade Material
Carbide
Color Family
Black
Number of Pieces
1
Oscillating Tool Attachment Type
Blade
Power Tool Accessory Type
Oscillating Tool Accessory/Part
Returnable
90-Day
Tools Product Type
Power Tool

Questions & Answers

13Questions36Answers

Will these work in the Ryobi tool?

Asked by MRM July 19, 2020
2
Answers

The Dremel MM485U Dual Interface Oscillating Blade is compatible with the Ryobi Tools. For further assistance, please contact us at 1-800-437-3635, Monday - Friday, 8A-5P CST.

Will this fit Dremel Multi Max 6300-05? I need to cut some pine trim. So I don't need a lot of po...

Asked by Brian May 3, 2020
3
Answers

Should fit. Blade is slightly thicker than standard wood blade so if you are using in pine I would use a standard wood blade.

Will this fit the Dremel MM50?

Asked by CURMO September 19, 2019
2
Answers

The Dremel MM485U Blade is compatible with the Dremel MM50. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday - Friday, 8A - 5P CST.

I have a Crasftman Bolt-on or Black&Decker Matrix (one and the same) will this fit the oscillatin...

Asked by Laurent June 28, 2019
3
Answers

No

will these blades work on a ridgid jobmax

Asked by Prualarms November 14, 2018
3
Answers

Yes. I have a Jobmax. It comes with an adapter to fit Dremel and Bosch blades. This blade fits perfectly onto the Jobmax.

Will this cut throug a golf club?

Asked by Cass October 9, 2018
5
Answers

Most likely. It's carbide tipped so metal isn't a problem It may take a little time depending on the hardness of the metal. A standard hack saw might be a little easier to use for what you're doing.

Will this cut corian?

Asked by Rob January 21, 2018
5
Answers

Don't know I cut nails

Can this blade be used to cut small pieces of a stone backsplash prior to installation

Asked by tj October 31, 2017
4
Answers

No. You need a diamond blade to cut stone.

will this fit the Dremel mm30

Asked by homer July 5, 2017
4
Answers

Yes it's designed for use on multi type tools.

Can I use this blade to make a 1/8" notch in a glass tile that is already installed on a backsplash?

Asked by steve January 16, 2017
5
Answers

Go very slow, use tape[cloth backed tape] and use water as you cut. GO SLOW

Universal Dual Interface Carbide Flush Cutting Oscillating Blade - page 2

Customer Reviews

  • 4
    out of 312 reviews
  • 76% recommend this product
Filter by:
Showing 1-10 of 312 reviews
Junk for $20
"Carbide" teeth tore right off trying to cut finish nails. Save your money.
by ProPlumber
The tool worked as advertised, adapted well with my multi-use tool, and worked great cleaning up ...
The tool worked as advertised, adapted well with my multi-use tool, and worked great cleaning up rough cement edges from a foundation cut for egress windows
by Hank
1 person found this helpful
TRASH
I was using this to cut toilet bolts and made it half way through the third bolt when it lost a bunch of teeth. Carbide my butt
by
1 person found this helpful
Blade does not last
As other reviewers have noted, this blade does not last when cutting stainless steel bolts. I cut a single 3/8 inch stainless steel bolt in an anchor swivel, and the blade was basically toast. That's an expensive cut. $20 for a single cut.if something says carbide on it, I expect it to last a while longer.
by Bill
1 person found this helpful
My husband had bought a Dewalt multi tool recently at Home Depot. With that he had a blad that wa...
My husband had bought a Dewalt multi tool recently at Home Depot. With that he had a blad that was included. Within a week of owning the to he had broke the blade. We went back to Home Depot and found the Dremel blade which is multifunctional. He loves it! It is so much more durable, effective,efficient, and just makes it resourceful for all of his tasks at hand!
by Norma
I used this blade on my DeWalt multitool. The edge worked well for a few hours. (I used it on a s...
I used this blade on my DeWalt multitool. The edge worked well for a few hours. (I used it on a synthetic water-proof wall product called Wedi board.) Suddenly the blade was rattling. When I looked closer I realized it had broken where it attaches to my tool. So the edge was still intact, but I could no longer user it because there was nothing to attach it to. The cutting was great for my purposes, but I can't recommend it in good faith without understanding the cause of the breakage.
by
2 people found this helpful
by HomeDepotCustomer
by EHM
Strong and durable highly recommended....
Strong and durable highly recommended.
by Flawless
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Showing 1-10 of 312 reviews