Internet #301210679

Model # P320

0859802006372

E900 HARDWARE

20 in. Plug-End Garage Door Spring (0.244 in. #3 Wire)

$ 37 02

Overview

The P320 20 in. Plug-End Extension Spring is a Holmes spring replacement for heavier 1-piece garage doors as well as for toy haulers using lift springs. Replace all springs at the same time for balanced door lift and even wear. A c-hook is required for a single spring installation while a w-hook is required for a double spring installation available separately.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

The P320 20 in. Plug-End Extension Spring is a Holmes spring replacement for heavier 1-piece garage doors as well as for toy haulers using lift springs. Replace all springs at the same time for balanced door lift and even wear. A c-hook is required for a single spring installation while a w-hook is required for a double spring installation available separately.
  • 2-springs (1 each side) will lift a 125 lbs. to 250 lbs. door
  • Safety containment rod to prevent spring from coming loose
  • Minimum 1 in. low headroom required
  • Length over coils is 20 in.
  • Outside diameter is 2 in.
  • Wire diameter gauge is (0.244) # 3
  • Initial tension is 165 lbs. to 185 lbs.
  • Maximum allowable stretch is 16 in.

Product Overview

Model #: P320
Internet #: 301210679

The P320 20 in. Plug-End Extension Spring is a Holmes spring replacement for heavier 1-piece garage doors as well as for toy haulers using lift springs. Replace all springs at the same time for balanced door lift and even wear. A c-hook is required for a single spring installation while a w-hook is required for a double spring installation available separately.

  • 2-springs (1 each side) will lift a 125 lbs. to 250 lbs. door
  • Safety containment rod to prevent spring from coming loose
  • Minimum 1 in. low headroom required
  • Length over coils is 20 in.
  • Outside diameter is 2 in.
  • Wire diameter gauge is (0.244) # 3
  • Initial tension is 165 lbs. to 185 lbs.
  • Maximum allowable stretch is 16 in.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Brand E900 HARDWARE E900 HARDWARE E900 HARDWARE E900 HARDWARE
Name 20 in. Plug-End Garage Door Spring (0.207 in. #5 Wire) 20 in. Plug-End Garage Door Spring (0.244 in. #3 Wire) 42 in. Plug-End Garage Door Spring (0.207 in. #5 Wire) 42 in. Plug-End Garage Door Spring (0.244 in. #3 Wire)
Price
$28.83
$37.02
$69.43
$89.34
Ratings (6) (7) (4) (1)
View Product View Product View Product View Product

Specifications

Dimensions

Spring Length
20

Details

Garage Door Part/Accessory Type
Extension Spring
Material
Steel
Returnable
90-Day
Weight Capacity (lbs.)
250

Warranty / Certifications

Manufacturer Warranty
1-Year Extended Warranty

Specifications

Dimensions

Spring Length
20

Details

Garage Door Part/Accessory Type
Extension Spring
Material
Steel
Returnable
90-Day
Weight Capacity (lbs.)
250

Warranty / Certifications

Manufacturer Warranty
1-Year Extended Warranty

Questions & Answers

E900 HARDWARE 20 in. Plug-End Garage Door Spring (0.244 in. #3 Wire) What is the difference betwe...

E900 HARDWARE 20 in. Plug-End Garage Door Spring (0.244 in. #3 Wire) What is the difference between a P320 and a 320C spring?
Asked by: Susie
The "P" designation is for a plug-end garage door spring. The "C" designation is for a clip-end garage door spring. Generally, clip-end springs have greater weight capacity. Both require a "C-Hook" at each end for single spring installation. If you are installing springs in pairs on each side of the door, you will need "w-Hooks"(See pictures)
Answered by: Santa
Date published: 2019-04-21
  • y_2019, m_6, d_24, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_301210679, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 29ms
  • QUESTIONS, PRODUCT

Customer Reviews

20 in. Plug-End Garage Door Spring (0.244 in. #3 Wire) is rated 4.7 out of 5 by 7.
Rated 5 out of 5 by from I would recommend the use of this 20 inch Plug - End Garage Door Spring (0.244 inches and with a ... I would recommend the use of this 20 inch Plug - End Garage Door Spring (0.244 inches and with a number three wire). Easy install for a couple of people. Plug End extension spring is a replacement for heavier - 1 piece garage doors as well as a replacement spring on Toy Haulers that use a lift that requires heavy duty springs. The weight capacity for this spring is 250 pounds.
Date published: 2019-01-24
Rated 5 out of 5 by from The P320 20" plug end extension spring is a Holmes spring replacement for heavier one piece garage doors as well as for toy haulers using lift springs. Replace all springs at the same time for balanced door lift and even ware. A c-hook is required for a single installation while a w-hook is required for a double spring installation. Two springs will lift a 125# to 250# door. When installing the springs a minimum of one inch clearance or headroom required. Initial tension on the spring is 165# -185#. The manufacturer warrants the spring against defects or failures for one year from date of purchase. If a defect should occur within the time frame mentioned above, the manufacturer will assist with replacement at no additional cost. MADE IN THE USA!
Date published: 2019-01-23
Rated 4 out of 5 by from This Type Of Plug-End Garage Door Springs Is A Great Piece Of Hardware! It Is A Good Value For It... This Type Of Plug-End Garage Door Springs Is A Great Piece Of Hardware! It Is A Good Value For It's Price! Which Is Very Good! These Springs Come In Different Wire Size For The Weight Of Your Ramp Or Door You Are Installing Them On. So Make Sure You Get The Right Size For Your Job. Also The Right Length For Your Project So You Do Not Over Pull The Spring. Once You Have The Correct Spring For Your Job And The Hardware You Need, Installing The Springs Is A Ease Job And Will Take You No Time At All Too Install! It Is Also A Good Ideal To Replace All Your Springs At The Same Time, It Will Save You A Lot Of Headaches In The Long Run! Overall A Great Product To Use.
Date published: 2019-01-27
Rated 5 out of 5 by from Great replacement spring for one-piece garage doors and drop door/ramp on trailers (commonly refe... Great replacement spring for one-piece garage doors and drop door/ramp on trailers (commonly referred to as toy haulers). They should always be replaced in pairs to insure balance of the door and consistent wear. These springs are heavy duty & will support up to a 125 to 250 pound 1-piece door when installed with 2 springs (one on each side) with a C-hook or 250 to 500 pound door when installed in pairs on each side with a W-hook. Maximum stretch is 16 inches. There is an internal safety rod to prevent them from coming loose. These springs are an industry standard.
Date published: 2019-01-17
Rated 4 out of 5 by from This spring as the others did came in a cardboard box and arrived unscathed even though the box ... This spring as the others did came in a cardboard box and arrived unscathed even though the box was damaged. The spring itself was pretty much grease free and unblemished . The finish on it seemed solid and the working load seems to be in line with the spring size. In comparison to a competitive product there is little if any difference. The wire dimension is consistent through the entire length of the product. All in all other than the shipping container I was impressed at this product. it installed easily and worked well
Date published: 2019-02-01
Rated 5 out of 5 by from A pair of these will lift 125 to 250 LBS. They're built of #3 wire. I used this spring to count... A pair of these will lift 125 to 250 LBS. They're built of #3 wire. I used this spring to counterbalance steel ramps on my heavy equipment trailer. Like other springs by E900 Hardware, these are well-crafted with standard end fittings and a reliable center safety retainer bar. The manufacturer provides detailed instructions (on-line) with many installation tips. The circular wire is precisely wound and the coils are fully closed in the rest position. The entire assembly bears a black oxide finish.
Date published: 2019-02-02
Rated 5 out of 5 by from We ordered a lot of heavy springs this winter we were looking for a way to hold tension on our la... We ordered a lot of heavy springs this winter we were looking for a way to hold tension on our large maple trees that take a beating when we have high winds, we are goin to tie the large trees together with 1/4 inch cable and a heavy garage door springs, that will give the trees enough room to flex and return without breaking or being blown down the spring just came in and are exactly what we wanted, they are high made from quality steel, and very well made, we are pleased.
Date published: 2019-01-26
  • y_2019, m_6, d_25, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_, sid_301210679, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 45ms
  • REVIEWS, PRODUCT