Return this item within 90 days of purchase.
Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Eagle interior Concrete Dyes transform plain concrete into attractive decorative concrete without the expense and tedious process of acid staining or overlays. These stains can be prepped, applied, and sealed within 2 days. Choose from 17 stock colors or an endless palette of colors by combining various colors and applications.
Container Size | 8 Ounce | Coverage Area (sq. ft.) | 200 sq ft |
---|
Application | Concrete Dye | Application Method | Paint Sprayer |
---|---|---|---|
Base Material | Water Based | Color Family | Brown / Tan |
Color/Finish | Cola | Dry To Touch Time (hh:mm) | 01:00 |
Interior/Exterior | Interior | Maximum Optimal Temperature (F) | 50 |
Minimum Optimal Temperature (F) | 90 | Paint/Stain Clean Up | Soap & Water |
Paint/Stain Features | Top Coat Required | Recommended Number of Coats | 1 |
Returnable | 90-Day | Stain & Sealer In One | No |
Substrate/Surface Material Use | Brick, Concrete, Stone | Surface Location | Basement Floor |
Time before recoating (hours) | 1 | Tinted / Base | Tinted |
Transparency | Semi-Transparent | Vertical/Horizontal | Horizontal |
Manufacturer Warranty | Since the methods of application and conditions are beyond our control, we make no guarantee or warranty concerning the use or results to be obtained from use of the described product. Any such warranty of merchantability is disclaimed. Buyer is solely responsible for results. |
---|
Our Interior Dyes need to penetrate uncoated concrete. They cannot be applied over an existing coating. The Behr Solid Stain is a coating that would not allow the dye to soak in.
The Interior Dye is not UV stable and will fade away in direct sunlight. It also should not be used to color concrete as an admixture. It would take a tremendous amount to change the color of the concrete. you are looking for what is called and integral color for concrete. they are generally in the powder form. We do not make these types of products.
The Interior Dyes cannot be applied over a painted floor. The dyes need to soak into the concrete, a coating would block their ability to do so. The paint would need to be removed before application.
You can brush it on instead of spraying. It would not be a very efficient way to apply the dye to floors but in your application, that would not be an issue.
I sprayed my floors but used a brush to apply the stain near the base with no noticeable brush strokes. Still probably best to test a small inconspicuous area.
The Dye is specifically formulated for concrete and is not recommended on natural stone.
Thank you for your recent inquiry with The Home Depot, Nana. You can view all of the directions to prep and apply this concrete dye here: http://www.homedepot.com/catalog/pdfImages/ea/eafd6609-655f-4026-abab-e7907d0a6ec9.pdf Each container covers approximately 200-400 square feet per gallon, depending on porosity and depth of color desired. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
It cost me approx $200 to do roughly 750sf.
You can stain the concrete with this but you should definitely seal it afterwards. The surface should also be clean of any oils or dirt because it will not penetrate the floor properly. If you're looking to cover the existing stains, I'd recommend a solid epoxy type paint designed for garage floors. It will cover the stains and hold up better if you're parking a car on the finished floor.
I did about 400sf with 3/4 of the bottle. I left a little extra if I needed to do some touch up. I could see doing 600sf with one full bottle. Dilution ratio I used was 4 to 1.
This product should be poured into a one gallon spray bottle and then the rest of the bottle is filled with water.
Viewing 1-8 of 8
4.4 out of 5