49 in. x 24-1/2 in. Castle Rock Stacked Stone, StoneWall Faux Stone Siding Panel

Thanks for reaching out. The Castle Rock Stacked Stone is sold per 48 in. x 24 in. panel. Each panel covers 8 square feet. They cut, trim, and install easily and hassle-free with general woodworking tools (construction adhesive and nails/screws). For the installation guide, feel free to visit: https://images.homedepot-static.com/catalog/pdfImages/cc/ccc23878-0bd8-4292-a03a-9fe44bc7828f.pdf

Thanks for reaching out. These panels are one of our most popular products and truly offer a realistic finish. If you'd like to see a sample, we have one available under Model #PNUCRSD-MAT-SAMPLE. This will give you the ability to check out the product, before purchasing the full panels.

Thanks for reaching out. No, these panels are not meant to be walked on. They install easily on walls and ceilings for an authentic, decorative touch.

Thanks for reaching out. Yes, these panels can be installed over brick! They install easily with construction adhesive and the appropriate masonry fasteners, trimming and cutting with general woodworking tools. The panels should be applied over a sheathing that provides a smooth, flat, solid, non-expansive, stable surface. For exterior applications make sure sub wall assembly is weather tight before applying Stonewall Wall Panels. To view the installation guidelines, please visit: https://images.homedepot-static.com/catalog/pdfImages/cc/ccc23878-0bd8-4292-a03a-9fe44bc7828f.pdf

Thanks for reaching out. There are three accessory items for this panel, including a trim sill (which helps it give a "finished" look), inside corner, and an outside corner. The Model # for the Trim Sill is PNUTS02X48SD. The Model # for Inside Corner is # PNUIC03X48SD. The Model # for the Outside Corner is # PNUOC03X48SD. Using The Home Depot search bar, you can type that in and they will pop right up.

Yes, this product can be glued to the side of a cinder block.

Thanks for reaching out! These are sold in 48 in. x 24 in. panels. The panels are sold individually, to assure you can order the exact quantity needed for your project. Each panel covers just about 8 square feet.They are lightweight, easy to install, and long-lasting.

Thanks for reaching out! These Stonewall Panels can be installed on any relatively smooth wall, that provides a flat, solid, non-expansive, stable surface. We recommend using construction adhesive and the appropriate screws for your surface. The installation instructions can be found, here: https://images.homedepot-static.com/catalog/pdfImages/cc/ccc23878-0bd8-4292-a03a-9fe44bc7828f.pdf

Thanks for reaching out! The material is not flammable and may work for your situation, depending on the distance the panels are installed from the wood stove. The panels are not considered fire rated. We recommend following the stove manufacturer's guidelines for spacing and distance of products, installed in conjunction with the stove.

I had to call HD to determine type o cement to use.