A: Wire cutters
A: a cable cutter, Cold chisel, or even a bolt cutter will work.
A: Cable cutter
A: You can use part# 40294, 8 in. Wire Rope and Cable Cutter, to cut the 1/16 in. x 50 ft. Galvanized Steel Uncoated Wire Rope.
A: This wire rope is not intended for use as a safety device or in any application where failure may result in property damage.
A: It is a little light for that but.....yes in a pinch for a small shed.
A: No it was to hold a bird feeder that the squirrels kept eating through the rope
A: It says 96 lbs limit on the package
A: I placed over 200 pound pressure on it and still holding well
A: We do not have information on breaking strength. The safe working load limit for this galvanized uncoated wire rope is 96 lbs.
A: as it is galvanized, I would use zinc coated copper outside in the weather.
A: Not stainless. It is galvanized and yes cable swage work fine
A: used aluminum cable not stainless
A: I used aluminum and works fine....I have one loop that is five yrs old and still like new
A: This uncoated wire rope is not stainless steel, it is carbon steel. Using aluminum sleeves or zinc plated copper sleeves on this rope is ok, but be sure not break the rope.
|Name||1/16 in. x 50 ft. Galvanized Steel Uncoated Wire Rope||100 ft. 150 lb. 12-Gauge Galvanized Wire||1/8 in. x 50 ft. Galvanized Steel Uncoated Wire Rope||1/16 in. x 50 ft. Galvanized Vinyl Coated Steel Wire Rope|
|Rope Diameter (in.)||1/16 inch||1/2 inch||1/8 inch||1/16 inch|
|Product Length (ft.)||50 ft||100||50.0 ft||50 ft|
|Working Load Limit (lbs.)||96||150||340.0||96|
|View Product||View Product||View Product||View Product|