#1 Home Improvement Retailer

Internet # 202262870

Model # 671255E

Store SKU # 602046

1/2 - 1-1/4 in. Stainless Steel Hose Clamp (10-Pack)

Includes 10 fittings ($1.80 /fitting)
$17.98
  • Ideal for plumbing repairs on 1/2 in. - 1-1/4 in. applications
  • Durable stainless steel provides corrosion resistance
  • UPC certified for plumbing applications
  • View More Details
Store
0 in stock
caret

Product Details

Tackle your project with this Everbilt hose clamp, made of 100% stainless steel. Ideal for corrosive applications or ones with moisture or water exposure, the stainless steel clamp resists corrosion. Perfect for plumbing repairs, this clamp provides a durable, low cost maintenance solution.
  • SAE size 12 clamp fits 1/2 - 1-1/4 in. OD applications
  • 10 clamps per package
  • Stainless-steel construction for durability
  • 1/2-in wide band and 5/16-in slotted hex head
  • Perfect for plumbing repairs, automotive repairs, or various uses around the house or business
  • Features a worm-drive design and punched rectangular perforations
  • IAPMO Tested and Certified to UPC standards
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

24Questions
caret
Q:What is the maximum temperature rating of these clamps?
by|Sep 12, 2023
1 Answer
Answer This Question

A:  JonG, the maximum operating temperature for this clamp is 800 degrees Fahrenheit. Thanks for your question.

by|Sep 13, 2023
    caret
    Q:Can this clamp be used for a high pressure pex household water line?
    by|Aug 4, 2023
    2 Answers
    Answer This Question

    A:  No. Hose clamps are not an approved pressure fitting. 

    by|Aug 4, 2023

      A:  no use appropriate sharkbite connector

      by|Aug 4, 2023
        caret
        Q:Is it correct that these will fit on a hose/tube with an inner diameter of 1-1/4" (that has an outer diameter of 1-5/8")?
        by|Dec 14, 2022
        1 Answer
        Answer This Question

        A:  Hi Ben: The clamps have min/max dimensions that need to fit over the outside diameter of hoses. In this case, the hose max dimension is 1 5/8 inch, this clamp has a max diameter of 1 1/4 inch, so it will not fit. SKU 100-592 at The Home Depot will fit this application. Thanks for your question.

        by|Dec 16, 2022
          caret
          Q:Is it correct that this will fit on a hose/tube with an inner diameter of 1-1/4" (that has an outer diameter of 1-5/8")?
          by|Dec 14, 2022
          1 Answer
          Answer This Question

          A:  Hi Ben: The clamps have min/max dimensions that need to fit over the outside diameter of hoses. In this case, the hose max dimension is 1 5/8 inch, this clamp has a max diameter of 1 1/4 inch, so it will not fit. SKU 100-592 at The Home Depot will fit this application. Thanks for your question.

          by|Dec 16, 2022
            Showing 1-4 of 24
            caret

            Customer Reviews

            4.6 out of 5
            (458)
            • 4.6
              out of 458 reviews
            • 94% recommend this product
            Filter by:
            Showing 1-10 of 458 reviews
            How do you rate a band clamp. Seriously, it either works or it doesn't and these worked. Used t...
            How do you rate a band clamp. Seriously, it either works or it doesn't and these worked. Used them to secure then end of a water hose to a new hose coupling. Works like a champ. Need some detailed feedback? Well, the slot for the flat head screw driver is rounded instead or squared off promoting slippage while screwing the clamp on. Not good. You could stab yourself with the screw driver while trying to tighten the clamp. So I recommend you us a hex drive socket to tighten it. Problem there? The corners of the hex are rounded too, but while the socket might slip you won't possible stab yourself with the driver. Simple product that does what it's designed for although obviously mass produced with engineering design flaws. My 2 cents worth.
            by
            • DIY
            • Verified Purchase
            • Recommended
            Nice smooth clamping. Strong, performed fine. Selected to clamp 3/4 id. tubing to fittings to rep...
            Nice smooth clamping. Strong, performed fine. Selected to clamp 3/4 id. tubing to fittings to repair waterline. Satisfied with clamps. Seemed thinner than older clamps but still did the job. Screw turned easily even with pressure so precise thread and band grooves on the well made smallish clamp.
            by
            • DIY
            • Recommended
            3 found this review helpful
            I use these clamps for making repairs to my 1-inch polyethylene underground sprinkler lines that ...
            I use these clamps for making repairs to my 1-inch polyethylene underground sprinkler lines that were installed in 1973 - four clamps per replacement section with slip fittings. Although they can be tightened with a screwdriver, the best seal is created by carefully heating the end of the polyethylene line with a heat gun or propane torch, inserting the slip fitting, tightening the clamp's hex screw first with a screwdriver, and then while the line is still warm completing the tightening with a small wrench on the hex screw.
            by
            • Pro
            • Verified Purchase
            • Recommended
            I bought these for an automotive repair from HD because I didn't want to pay a higher price from ...
            I bought these for an automotive repair from HD because I didn't want to pay a higher price from the local auto parts store. They worked well and have been leak free for the past week. I think it was a good purchase and hopefully will pass the test of time. I still have 6 left and will use them on a home project this time. It's good to have extras around the house.
            by
            • Verified Purchase
            • Recommended
            5 found this review helpful
            I used these to fix an office chair that would not stay up. Put as many on the stem as you need a...
            I used these to fix an office chair that would not stay up. Put as many on the stem as you need and the seat will never sag down again. The clamps work exactly as expected and appear to be well made.
            by
            • Verified Purchase
            • Recommended
            Worked well. Just make sure you use the right diameter for the job.
            Worked well. Just make sure you use the right diameter for the job.
            by
            • DIY
            • Recommended
            5 found this review helpful
            Not very good
            These are Ideal Tridon hose clamps. They aren't very good. Almost half of the hose clamps I used, broke. They are not good when you need a lot of clamping force, such as when connecting HDPE pipe. Also there are these little tabs, under where the strap goes in, that are folded down to hold the body of the screw part together; when you tighten down the hose clamp, the tabs tend to get jammed into the strap and bent with it. In one case the tabs bent all the way 180Ëš, which caused the tabs to lock the strap in place, making it impossible to remove the hose clamp (instead the screw came out of its house). They work but they do not rank very high; the original hose clamps that say "-O-" on them (don't know who makes those) were much better and they could be cranked as tight as I could make them without stripping. There are worse hose clamps out there, though. This will work but expect to break some.
            by
              3 found this review helpful
              Good product, good price.
              by
                by
                  by
                    Showing 1-10 of 458 reviews