Top Rated
Return this item within 30 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
1-5/8 in. Plastic Wheel Stem Casters (4 per Pack) is designed for use on lightweight furniture, cribs, playpens and small tables. They feature a 50 lb. load rating. The casters roll on carpeted and hard surfaces and install on furniture with 5/16 in. x 1-1/2 in. stems.
Dimensions: H 3.5 in, W 1 in, D 1.75 in
Product Depth (in.) | 1.75 in |
|---|---|
Product Height (in.) | 3.5 in |
Product Width (in.) | 1 in |
Stem Length (in.) | 1.625 |
Stem Width (in.) | .25 |
Wheel Diameter (in.) | 1.625 in |
Wheel Width (in.) | .625 in |
Accessory Type | Caster |
|---|---|
Builders Hardware Product Type | Casters |
Casters Product Type | Stem |
Color | White |
Color Family | Whites |
Features | No Additional Features |
Load Capacity (lb.) | 50 |
Load capacity per caster (lb.) | 50 |
Package Quantity | 4 |
Returnable | 30-Day |
Swivel/Rigid | Swivel |
Wheel Material | Plastic |
Manufacturer Warranty | 1-year against defects in material and workmanship. |
|---|
Yes, there are instructions on the packaging.
Thank you for reaching out to Shepherd Hardware Products! The load rating of 50 lbs is per caster, if you put on 4 casters the total weight load would be 100 lbs. I would not suggest using them if the total weight is heavier than this though because it might cause the stems to bend and break. Please reach out to customerservice@shepherdhardware.com if you have any further questions.
Thank you for your interest in a Shepherd Hardware product. Yes, you are correct the load rating is per wheel, so this pack of 4 will support a 200lb load when used together. If we can be of further assistance, please reach out to customerservice@shepherdhardware.com.
Thank you for your inquiry. I am from the manufacturer. You need to drill a 3/8" hole 1-3/8" deep in the center of the leg. If you have any further questions, feel free to contact us at customerservice@shepherdhardware.com and a Product Specialist will be glad to assist.
I doubt the legs would be large enough or strong enough to support the caster.
I doubt it. The post is 3/8" - 1/4" in diameter and melamine is fairly soft and won't hold the post.
We used these to replace old casters on a dresser.
Thank you for your interest in Shepherd Hardware Products! Unfortunately, we would not recommend using a stem or plate caster for this application. You need the additional stability of a U shaped mounting bracket. Shepherd Hardware currently only has 1 caster with this type of mounting system, it is Home Depot Item #100176190 Model #9420. Sincerely - Jenn
The wheels might be on width with two boards, but these were cheap. They stopped spinning, too much weight crushed the mechanics of them. I used it on a small end table with a small computer printer.
I would get rubber wheels for outdoor use
Hi Pat. These are designed for use on lightweight furniture, cribs, playpens and small tables. They feature a 50 lb. load rating. They are not for heavy items that you are going to move around a lot. I don't believe this is the best option for you.
I can not certify weight capacity but believe roller weight limit is additive. I am 180 and chair is heavy. For your app check its dry weight and estimate amount you will add. Will your project accommodate bed frame rollers?
Hi Bobthebuilder420, These have a load capacity of 50lbs per caster, so the combined weight limit is 200lbs. Be safe.
Each Caster is rated at 50 pounds, so the package is 200 pound rating.
no these are plastic casters.
yes may have to wrap plunger with tape to fit snug
Viewing 1-8 of 10
4.1 out of 5