Fits all gas water heaters, as well as gas appliances
Constructed of copper tubing for durability
Compatible with standard RV LP gas water heaters and furnaces
Product Details
This kit contains a thermocouple and positioning adapters to fit all gas water heaters, as well as appliances. Made with copper tubing. It is not for use with catalytic heaters or refrigerators.
Universal kit
Contains multi-threaded and clip-on positioning adapters
Also fits all standard RV liquid petroleum gas water heaters and furnaces
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
Specifications
Questions & Answers
47Questions
Q:Can this be used on a gas fireplace?
by|Jan 17, 2023
0 Answer
Answer This Question
Q:Will these work in a Rheem hot water heater
With a Honeywell thermostat control
Also looking for a pilot to
by|Dec 24, 2022
1 Answer
Answer This Question
A:Â Not sure I went on applianceblog.com to verify.
by|Dec 29, 2022
Q:Will this work on a O'Keeffe and Merritt gas oven. Had gas company come and check my stove/oven. Technician checked and said I needed to replace the thermal couple. Please advise
Renay
by|Dec 6, 2022
0 Answer
Answer This Question
Q:Will this work on hc-100 (30yo unit by hydrotherm)
by|Nov 24, 2022
2 Answers
Answer This Question
A:Â yes. I bought one last week, it is working great
by|Nov 29, 2022
A:Â Hi David and thank you for your question. Please call 413-564-5515.
by|Nov 25, 2022
Showing 1-4 of 47
Customer Reviews
4.4 out of 5
(589)
4.4
out of 589 reviews
86%recommend this product
5413
486
321
215
154
Filter by:
Showing 1-10 of 589 reviews
May 4, 2022
Works on GE gg40t06avg01
Worked on my GE water heater. Pilot was not starting lit. I installed this and is working Normally now.
by
Recommended
Jul 23, 2021
Lasted 4 years before needing a new replacement
I bought and replaced the thermocouple in my Rheem water heater 4 years ago. The pilot light finally went out today and would not stay lit after several attempts to re-light it. Since the igniter was still working, I knew instantly it was the thermocouple.
The old thermocouple (also Everbilt) had a corroded end with a carbon ash residue. The new thermocouple installed fairly easily and was able to keep the pilot light lit after igniting it again.
24" was a bit longer than what I needed, but the extra length can be easily bent and shaped to fit inside the cover.
by
Recommended
Dec 21, 2020
Worked great, took less than 30 minutes to install. This was a little longer than the original on...
Worked great, took less than 30 minutes to install. This was a little longer than the original one, but very easy to bend tubing to take up slack. I would recommend this product.
by
Verified Purchase
Recommended
Oct 1, 2019
My old thermocouple was not keeping the pilot light lit on my GE propane 40gal water heater. It w...
My old thermocouple was not keeping the pilot light lit on my GE propane 40gal water heater. It was putting out 22mv but would not keep the pilot solenoid activated. This new one is putting out 27mv when heated and probably more amperage. The pilot light is working. All is good.
by
Verified Purchase
Recommended
Dec 26, 2018
This product worked great I would recommend it to anybody I had it fixed within 20 minutes after ...
This product worked great I would recommend it to anybody I had it fixed within 20 minutes after I get home and it doesn't matter how long you have you could always fix it mine was 16 inches I bought a 24 and it work perfect
by
Verified Purchase
Recommended
1 found this review helpful
Jun 20, 2018
Just a tip before I comment on this item. If your water heater is not leaking, and it stays lit f...
Just a tip before I comment on this item.
If your water heater is not leaking, and it stays lit for a few minutes and it goes out, it has been my experience (I had several rentals) so comfortable in saying that replacing this item is the solution.
Usually just need one or two open wrenches to disconnect a gas line and the thermocouple (don't forget to turn off the gas valve), a small (3 or 4") Phillips screw driver to detach the unit inside the burner area.
My tenants called me at 8 pm and by 9 pm they had hot water.
Not a young landlord, just 22 yrs shy of 100.
by
Verified Purchase
Recommended
22 found this review helpful
Jan 25, 2018
Fit right in the exact same location and fixed the...
Fit right in the exact same location and fixed the problem.
by
Verified Purchase
1 found this review helpful
Dec 12, 2017
I tried to install this into a Bryant Day & Night 396G furnace. It didn’t fit. The probe did no...
I tried to install this into a Bryant Day & Night 396G furnace. It didn’t fit. The probe did not stick up high enough to reach the pilot light flame.
by
2 found this review helpful
Dec 6, 2017
30min YouTube, $12 tool and 1hr of work can save u $100 handyman invoice. It is totally worth it
30min YouTube, $12 tool and 1hr of work can save u $100 handyman invoice. It is totally worth it
by
Verified Purchase
Recommended
2 found this review helpful
Nov 8, 2016
Worked well as a general purpose thermocouple in a T46 Pizza Oven application.
Worked well as a general purpose thermocouple in a T46 Pizza Oven application.