3 in. Gray Cast Iron Swivel Plate Caster with 300 lbs. Load Rating

These steel caster's worked perfectly for the welding table

HI, You can put a set of ARMORskids Model # ASC3575 skids on a Cub Cadet. The front slot will take a stainless steel 5/16 inch x 3 inch long hex bolt with a smooth section to use as an axle. See that Stop Nut with the nylon insert in the picture? The wheels unbolt and the holes are 3/8" ID. "Drill" or ream out a 3/8" OD piece of straightened copper tubing to 5/16th inch. A few washers and such and you have rollers mounted to the inside of a 3X blower housing. On the outside are the blue poly skids (optional) and the stated Armorskids. Bolt it all together with a jam nut, fender washers, and a stop nut; and you can move your snow blower around just like a wheelbarrow. On a paved driveway, you don't have to worry about balancing a wheeled blower, wearing out the poly skids, or digging into gravel or a lawn with a track drive like I have if it tilts a bit. These wheels make your blower look industrial strength and super macho. They even adjust up and down in the Armor skid slots slightly on a track drive HD. Home Depot carries or can order, the entire list of parts you need. No holes are drilled into the blower! Make the copper sleeve bearing and it is a total bolt on from there. Your blower? I don't know how the holes will line up on your version of the Armorskids and if the steel wheels will be out of the way of the turning augers. My Cub (MTD) 3X with these wheels were not even that close. See for yourself. Don't forget some Bostick NeverSeez on the axles. You might have to buy the longest skids you can get so they stick out in front on other blower models. Armorskids might make you a pair that stick out a bit more in a pinch. The total cost for the new skids and two steel wheels was just under $60. Thank you HD for carrying quarter inch thick plate and ski shaped ArmorSkids. Stefan Slaw

Fit the bolt pattern of the casters I was replacing with these and are strong and sturdy. The weight capacity was the primary driver for getting these.

make the work more easier

perfect castors for carts making moving things around in the shop much easier. Thanks!