A: The Everbilt 3 in. x 3 in. Black Tee Surface Mount Hinge (2-Pack) does have limited range when opening. It does not open completely 360 degrees.
A: The Everbilt 3 in. x 3 in. Black Tee Surface Mount Hinge (2-Pack) is not available in the style of an overlay hinge at this time.
A: It depends on the length of the screws that come with the kit. Take the light of the screw and the thickness of the sheet rock and you will get your answer
A: if the screws are sticking a1/4 inch just grind them off
A: The screws included in the 3 in. x 3 in. Black Tee Surface Mount Hinge (2-Pack) are 3/4 (.75) inches long. This will be longer than the .703 inch thick plywood.
A: Hey Supplier Quality: You said the screws are slightly longer than the thickness of the wood, and would thus come through the wood, but are you taking into account the fact that the screw heads have to seat into the thickness of the hinge itself? Thank you.
A: The Tee Hinge should be in the aisle with gate hardware / door hinges. You can check with a store associate for the specific aisle number as it does differ by store.
A: Hardware aisle
A: Hello Hinge! These will be found on the hardware isle of your local Home Depot. Good luck!
|Name||3 in. Zinc-Plated Tee Hinge (2-Pack)||4 in. Galvanized Heavy Duty Tee Hinges (2-Pack)||4 in. Zinc-Plated Heavy Strap Hinge (5-Pack)||6 in. Black Heavy-Duty Tee Hinge with Rust Defender|
|Product Width (in.)||3||3.38||2.1||4.76377953|
|View Product||View Product||View Product||View Product|