#1 Home Improvement Retailer

Internet #

203672250

Model #

4120745EB

Store SKU #

194759

4 in. Red Polyurethane and Steel Swivel Plate Caster with Locking Brake and 250 lb. Load Rating

$1647
  • PU wheel casters ensure smooth mobility and are extremely durable
  • Steel swivel plate caster has 250 lb. load rating per caster
  • Ideal caster for carts, hand trucks, tables, and more
  • View More Details
Store
0 in stock
caret

Product Details

When you need exceptional commercial-grade casters that can manage a high load up to 250 lbs., the Everbilt 4 in. Polyurethane Casters with Brakes make the perfect solution. Suitable for use on virtually any surface in residential or commercial settings such as garages or factory floors. Constructed from durable polyurethane and resistant to grease, oil, cutting, chunking and abrasive wear for long-lasting use.
  • Superior to standard rubber in its resistance to grease, oil, cutting, chunking, and abrasive wear
  • Can be used on almost any dry factory floor or in garages where chemicals may be present
  • Polyurethane casters provide a high load rating for superior performance and durability
  • Weight rating for single caster: 250 lbs.
  • Features a lock that prevents wheel from moving
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

19Questions
caret
Q:Are these ok for outdoor use?
by|May 21, 2023
1 Answer
Answer This Question

A:  Thank you for your inquiry. I am from the manufacturer. Yes, this would be a good choice for outdoor use. If you have any further questions, feel free to contact us at 1-800-645-8990 Mon-Fri from 8am to 5pm EST and a Product Specialist will be glad to assist or you can email us at customerservice@shepherdhardware.com

by|May 23, 2023
    caret
    Q:What is the length and the diameter of the bolt and nut? (Also, what size of wrench(s) would I ne...
    by|Jul 30, 2019
    1 Answer
    Answer This Question

    A:  I actually used wood screws, 2".

    by|Nov 7, 2022
      1 found this answer helpful
      caret
      Q:If installing these to 4x4 wood posts, would standard deck screws hold up long term? (table desig...
      by|Nov 19, 2018
      4 Answers
      Answer This Question

      A:  I used 3/8 x 2” lag bolts. Pre-drill a smaller diameter hole. This will be much stronger and last longer.

      by|May 25, 2023
        6 found this answer helpful

        A:  Depends upon the load being carried by these wheels. I would not use standard deck screws which are typically beveled, but instead use heavier duty wood screws with round heads.

        by|May 25, 2023
          2 found this answer helpful

          A:  yes

          by|May 25, 2023
            1 found this answer helpful

            A:  Yes, but you will need washers. The hole is larger than the head of a deck screw.

            by|May 25, 2023
              3 found this answer helpful
              caret
              Q:Can I purchase these casters by case quantities?
              by|Feb 13, 2018
              2 Answers
              Answer This Question

              A:  Why don't you ask Home Depot, not another customer?

              by|May 25, 2023
                3 found this answer helpful

                A:  Thank you for your recent inquiry with Everbilt. Please contact the Pro Desk at your local Home Depot for further assistance with this request. If you have any further questions, please feel free to contact us at 1-800-531-3342 ext. 3600 Mon-Fri from 8am to 5pm EST and a Product Specialist will be glad to assist

                by|May 5, 2023
                  Showing 1-4 of 19
                  caret

                  Customer Reviews

                  4.8 out of 5
                  (80)
                  • 4.8
                    out of 80 reviews
                  • 91% recommend this product
                  Filter by:
                  Showing 1-10 of 80 reviews
                  Use them on a portable workbench i can have stationary in my garage or roll it outside love them ...
                  Use them on a portable workbench i can have stationary in my garage or roll it outside love them worked beautifully
                  by
                  • Verified Purchase
                  • Recommended
                  GOOD DESIGN, BAD QUALITY CONTROL
                  Shopped around for caster wheels for my mobile work bench (to support a 100lbs planer and other tools) so wanted something with bearings, rubber wheels, and quality break. These looked the best of all locally available selection. Got 4 and after bolting down 2 discovered that only 1 had good break mechanism and 1 would wobble on its axis after being locked. (See the photo where black spring engages with cog wheel to lock down the pivot axis.) Went back to my "local" HD and picked through their inventory of 11, just to find out I lucked out on the only good one they had. Drove twenty minutes to another HD and picked through their inventory of 7 they had, and found that 5 were good. So I ended up with 4 good ones for my project and returned the rest. The bench is steady! Good product design but poor production tolerances.
                  by
                  1 found this review helpful
                  Two way locking makes them more secure than casters that only stop roll. And, they can be placed ...
                  Two way locking makes them more secure than casters that only stop roll. And, they can be placed on all four corners for easier maneuvering. Large size makes them easy to move across most surfaces. Worth the extra cost.
                  by
                  • DIY
                  • Verified Purchase
                  • Recommended
                  3 found this review helpful
                  The polyurithane wheels did not last
                  I used these wheels on a table for my BBQ grill. In under two years the polyurithane has disentrigated. The load per wheel was less than 75 pounds and the grill was stationary on a concrete surface
                  by
                    1 found this review helpful
                    I wanted to make a stand for my wood lathe that I could wheel outdoors on nicer days to limit the...
                    I wanted to make a stand for my wood lathe that I could wheel outdoors on nicer days to limit the mess in my shop and these were perfect for the application. I didn't realize until after I installed them that activating the brake lever also locks the swivel feature of the caster - bonus!
                    by
                    • Verified Purchase
                    • Recommended
                    These casters were perfect for the herb garden box I made for my wife as an Easter gift. She is ...
                    These casters were perfect for the herb garden box I made for my wife as an Easter gift. She is able to roll it where ever she wants to for sun, shade or watering.
                    by
                    • Verified Purchase
                    • Recommended
                    2 found this review helpful
                    Hard. Red. Throbbing. What great wheels!...
                    Hard. Red. Throbbing. What great wheels!
                    by
                    • Verified Purchase
                    Great castor. Roll very easily on stone patio....
                    Great castor. Roll very easily on stone patio.
                    by
                    • Verified Purchase
                    Caster
                    These Casters are great! I have used them for multiple jobs including my heavy duty work bench. Very smooth, easy to lock and unlock
                    by
                      • Recommended
                      Beastly, but smooth
                      I bought these to go under a 8’ workbench I was building for my garage. Theyre hefty, big and bulky, but that’s exactly what you want, right? Once i had them installed, I started rolling around my 250lb workbench all over my uneven, sawdust and splinter laden garage... and it was light and butter smooth. I had expected a somewhat clunky, stiff operation but was met with an easy to maneuver and fairly light workbench. My petite and very pregnant wife was even able to roll it around wothout any problems. Way better than i expected. Would highly recommend.
                      by
                        • Recommended
                        Showing 1-10 of 80 reviews

                        Frequently Bought Together

                        ++
                        Price:
                        $1647