Everbilt's Round to Oval Duct Adapter allows for the consumer to attach the in-wall oval duct to the round dryer transition duct. This product includes an oval shaped 4 in. galvanized steel worm drive clamp, for easy attachment of the in-wall oval duct to the oval portion of the adapter. The adapter can also be easily disconnected for regular cleaning of the dryer duct.
Made of high impact polystyrene
Meets UL standard 94HB tests for flammability
Duct threads onto connector piece for easy connection, no clamps or tape is required
Suitable for use with 4 in. flexible or semi-rigid dryer transition ducts
A:Â Thank you for your question regarding our Everbilt 4 in. Round to Oval Dryer Duct Adapter. This will work with a 5 in. duct. You will need to ensure that worm clamp is securely attached to both the duct and adapter. For added seal, we recommend using aluminum duct tape to go over both connections once the clamp in tightened in place.
by|Sep 3, 2023
1 found this answer helpful
Q:My dryer vent is oval with 3" min dia and 5" max dia. Will this fit my vent?
by|Nov 30, 2022
1 Answer
Answer This Question
A:Â Are you speaking about your metal in-wall duct? If so, you should be able to squish the duct to form into the shape required to attach to this product
by|Dec 6, 2022
Q:Having a tough time getting the adapter to screw onto the threads of the semi-rigid duct. It keeps slipping off...or the threads end up compressing, producing resistance to the adapter...or the duct starts to tear.
by|Oct 27, 2022
1 Answer
Answer This Question
A:Â This should thread on very easily without causing resistance and should not in any instance cause the duct to tear
by|Apr 2, 2023
Q:Hose clamp will not close on wall connection, keeps sliding off
by|Aug 10, 2022
2 Answers
Answer This Question
A:Â The clamp adjusts from 3" to just over 4" inches. You can use a screwdriver to tighten the clamps and adjust tightly around the metal pipe that lays over the plastic connector
by|Aug 18, 2022
A:Â The tube goes on the inside of the metal pipe and the clamp secures on the outside
by|Sep 5, 2023
1 found this answer helpful
Showing 1-4 of 19
Customer Reviews
4.3 out of 5
(376)
4.3
out of 376 reviews
84% recommend this product
5
254
4
57
3
21
2
10
1
34
Filter by:
Showing 1-10 of 376 reviews
Nov 22, 2021
worked great
after struggling to get flex duct around my oval duct on the wall, I searched and found this adaptor. Slipped on the duct, tightened clamp, screwed flex duct on to bottom piece, snapped together and done. I did take the time to trim the flex foil and wire so no loose edges to catch lint.
by
Recommended
Mar 27, 2021
Works Great!
The product is great. The only hard part for me was the install just because of the metal vent, that goes outside, not being the same shape as the oval adaptor. When the dyer was first installed it was done so in a very poor manner with LOTS of vent tape. This is a MUCH more secure solution. See before & after picture.
by
Recommended
Mar 6, 2021
Worked PERFECTLY!
Purchased the oval to round adaptor and had the dryer running within 30 minutes. I secured it with the clamp it came with in the box and used dryer tape to help secure the duct hose in place. Additionally, I bought an elbow adaptor and secured it with a clamp to the dryer itself to put less strain on the duct hose. I also used dryer tape to secure the duct hose to the elbow even though it wasn’t entirely necessary once I moved the dryer closer to the wall. No leaks so far and it’s working well for me.
by
Recommended
1 found this review helpful
Dec 25, 2020
It fit our in-wall oval duct perfectly. Now we have to change our dryer vent duct.
It fit our in-wall oval duct perfectly. Now we have to change our dryer vent duct.
by
Recommended
Jul 3, 2019
"5 minute easy installation" . . . . NOT! This was a real horror show for me. Although the dime...
"5 minute easy installation" . . . . NOT! This was a real horror show for me. Although the dimensions seemed correct, this thing would not go outside or inside of my oval duct. After much struggle, including cutting both thumbs, I had to break it to force it inside. Then I had to screw it in there so it would not fall out. Installation was a real pain.
Frustrating and difficult to install but I know my vent might have been different from others for some reason. Go to the store and try it first. If it fits you're golden, otherwise look elsewhere.
by
DIY
7 found this review helpful
Oct 26, 2017
It could make it easier
It could make it easier
by
Verified Purchase
Recommended
May 2, 2017
This Round to Oval worked perfectly connecting from the dryer...
This Round to Oval worked perfectly connecting from the dryer to the wall outlet! Thank you Home Depot!
by
Verified Purchase
Sep 14, 2023
A must have for 5 inch oval to 4 inch round installation. Takes a little coaxing to squeeze it into the vent pipe but easy overall. Dryer hose screws in to the adapter snugly.
by
Verified Purchase
Sep 13, 2023
First time installer and it went smoothly. No problems with it .