![]() | ![]() | ![]() | ![]() | |
Brand | Everbilt | Everbilt | ClosetMaid | Prime-Line |
Name | 5 mm Nylon Shelf Support in White (8-Piece) | 5 mm Nickel Plated Angle Shelf Supports (8-Pack) | Preloaded Back Wall Clips for Wire Shelving (7-Pack) | 1/4 in., Plastic, Clear Locking Shelf Pegs (6-pack) |
Price | ||||
Ratings | (21) | (48) | (113) | (194) |
Accessory Type | Shelf Pegs,Shelf Pins | Shelf Pegs,Shelf Pins | Shelf Clips | Shelf Pegs |
Material | Resin | Plastic | ||
Number of Brackets | 7 | |||
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Everbilt | Everbilt | ClosetMaid | Prime-Line |
Name | 5 mm Nylon Shelf Support in White (8-Piece) | 5 mm Nickel Plated Angle Shelf Supports (8-Pack) | Preloaded Back Wall Clips for Wire Shelving (7-Pack) | 1/4 in., Plastic, Clear Locking Shelf Pegs (6-pack) |
Price | ||||
Ratings | (21) | (48) | (113) | (194) |
Accessory Type | ||||
Material | ||||
Number of Brackets | ||||
View Product | View Product | View Product | View Product |
Generally the 5 mm Nickel Plated Angle Shelf Supports (8-Pack) are located on the aisle with nuts, bolts, and washers. The aisle number will vary by store, so please ask a store associate for the specific location.
Bring one of your pegs from home and get a little bit bigger size and see if that will work for your shelf
NOPE...these are NOT meant to go into a drywall. They are quite small. They are specifically made to use on those laminate bookshelves. (ie: bookshelves that already have HOLES drilled on the sides). Therefore, you will need to buy DRYWALL supports or hooks for what you are describing.. Home Depot sells many different kinds of DRYWALL HOOKs. So you will need to buy DRYWALL HOOKS that are long enough to go through the drywall and then they are specially made to open in the back of the drywall, once screwed into the drywall. NOTE= Drywall hooks are pretty much "permanent", since they open up inside the wall. The only way to remove those drywall hooks (if ever you want to remove them) is by extraction w/ special tools (& you will end up w/ a 1/2 inch to 1 inch hole in the wall, which you will have to re-patch & paint). Been there, done that!
These are specific "support" hooks meant to be used ONLY on those laminate bookshelves w/ pre-drilled holes. These hooks are small. They will hold as much weight as any laminate book shelf would= Such as: some books, some knick- knacks, or some plush toys, or some soft clothing, or some sheets & towels (eg: if used inside a closet) etc. .....But nothing too heavy.
These hooks are specifically made to be used in those inexpensive LAMINATE bookshelves. They will only hold the weight of objects that are normally placed on a small shelf, example: in a kids' room, or to house sheets and towels, or knick-knacks. These are NOT heavy-duty metal hooks. They are very small and most people use them as replacements, when (as I did) they lose some.
We do not carry a Nickel-Plated Angle Shelf Support wider than 5mm.
Hi. These small metal BOOKSHELF hooks are specifically made to use inside those LAMINATE Bookshelves, that have pre-drilled holes already there. They are specific for that use only. So if you are looking for replacement hooks for your ready-made bookshelves, then this is what they are meant for. In my case, I had lost some of these type hooks (when I moved) so I needed more of them so that I could put my LAMINATE Bookshelves back up.
These small metal bookshelf "hooks" are made to be used in those inexpensive LAMINATE Bookshelves...For example, those bookshelves with pre-drilled holes. These are NOT drywall hooks, or NOT hooks to use inside a wall. These are specific hooks made to use only inside laminate bookshelves with pre-drilled holes, (example=bookshelves that people use in kids' rooms or in closets,etc).