Fisherman, Thank you for taking the time to bring this to our attention. I will pass this along for our team to look into. Best, Customer Care Team
Not sure. But the template works best if the edge is flush. Mine was angled and so the drill hole was set further inside than I wanted.
I used my Cordless drill.
Jim, Thank you for your question. To better assist you please reach out to our customer care team. They are available Monday – Thursday 8:00 a.m. to 5:00 p.m. EST and Friday 9:00 a.m. to 5:00 p.m. EST and can be reached at 800-635-2731 or by email at email@example.com. Best, Customer Care Team
Tim, Thank you for your question. We cannot speak to the specific size of the Blum hinges that you are using. Best, Customer Care Team
No it will not as the hole for the hinge needs to be 1/2 inch deep therefore the hole would go through the door
The instructions including with the hinge should suffice for the template. I am an amatuer woodworker and I followed those instructions instead
The depth of the hole is determined by the operator. The hinges I used specified that the hole needed to be 1/2inch in depth so I used a tiny piece of scrap that was 1/2 inch deep to measure.