5 gal. Penetrating Solvent Based Silane Siloxane Concrete Sealer and Masonry Water Repellent

After waiting 30 days for my 550 sq. ft. broom-finished new driveway to cure, The hard part was trying to pour from the 5G container into my pump sprayer. Hard to tell if I had applied enough. Here are photos showing some beading.

Sealant was easy to apply and work work with. Coverage was even and dry time was shown in the instructions. I sprayed mine on using a Dewalt sprayer which worked well. Cleanup with soap and warm water was simple and effective.

There is absolutely no noticeable difference in terms of appearance. But I think the repellent effect might be working. I followed the directions to the last word, but I am not satisfied because I was expecting at least a slight glow. I think this product is like wearing expensive underwear only you and your significant other know you are wearing a $250 underwear and nobody else notices.

Hawaii has wet issues common to our area. Tried different products but failed to seal for more than 3 months. Got the recommendation of Foundation Armor from a mason friend on the mainland. His years of use and results sold me. The application was easy, followed 24 hours of no moister to let it set and one year later so far it looks like when we first applied. Wow. Nothing better.

Unfortunately, my experience wasn't nearly as good. I called foundation armor explained my project and they recommended sx5000 to protect from freeze thaws of winter and ar350 for the wet look on my pavers. Applied SX5000 per instruction which darkened pavers slightly which was fine however there was no water beading up on the surface. Contact foundation armor and they told me don't worry about it just apply the ar350 and you will get the beading of water and protection you desire. So I applied the ar350 next. Two coats per the instructions. Went on well and seemed to bring out the true color of the pavers like I wanted. Then it rained about 36 hours later on and off for over a week. Once the patio started to dry out I could see white spots in the lower lying areas of the pavers where the rain was able to sit for extended periods of time. I called foundation armor and they stated they wanted pictures so they could see. I provided pictures. They asked all the usual questions about how product was installed trying to find an error with my installation. Nothing there for them. So they then claim the chemistry in the pavers attacked the sealer rendering it no good without even doing any tests to come to this conclusion on my job site. They said the pavers were sealed to soon after installation. I explained my entire job to them while I was on the phone with them first time before ordering their product. We went over the product I was using "Cambridge" and that it was a newly constructed patio. Another issue with their theory is the fact that under over hangs and my porch there is no white spots from the water. I can wet it and the surface looks fine. I believe the time allotment for rain to follow installation is too short. It appears there is moisture inclusion in my paver sealer which will cost me over 5-6000 to repair. No help from foundation armor.Example: the drill was really easy to assemble, lightweight and not noisy. I am really pleased with the battery life and was able to use the drill without charging for over an hour of heavy duty use...

Unfortunately, my experience wasn't nearly as good. I called foundation armor explained my project and they recommended sx5000 to protect from freeze thaws of winter and ar350 for the wet look on my pavers. Applied SX5000 per instruction which darkened pavers slightly which was fine however there was no water beading up on the surface. Contact foundation armor and they told me don't worry about it just apply the ar350 and you will get the beading of water and protection you desire. So I applied the ar350 next. Two coats per the instructions. Went on well and seemed to bring out the true color of the pavers like I wanted. Then it rained about 36 hours later on and off for over a week. Once the patio started to dry out I could see white spots in the lower lying areas of the pavers where the rain was able to sit for extended periods of time. I called foundation armor and they stated they wanted pictures so they could see. I provided pictures. They asked all the usual questions about how product was installed trying to find an error with my installation. Nothing there for them. So they then claim the chemistry in the pavers attacked the sealer rendering it no good without even doing any tests to come to this conclusion on my job site. They said the pavers were sealed to soon after installation. I explained my entire job to them while I was on the phone with them first time before ordering their product. We went over the product I was using "Cambridge" and that it was a newly constructed patio. Another issue with their theory is the fact that under over hangs and my porch there is no white spots from the water. I can wet it and the surface looks fine. I believe the time allotment for rain to follow installation is too short. It appears there is moisture inclusion in my paver sealer which will cost me over 5-6000 to repair. No help from foundation armor.

I applied this product as-recommended by the manufacturer. I live in Colorado, so it is dry, and had been dry for several days before I applied the product. I cleaned my driveway 48 hours before applying the SX5000. I did not apply to excess, I used the roll-on method. In another, test area, I used a light spray-on method. What you will see, in the images, is the negative effect caused by this product (staining). There is a change that this product can cause harm to your concrete - I've lived it. Be careful applying, and consider using a pro.

We have tried various products for our stamped concrete walkway, and while they look good for a while, it seems that just cleaning was just not worth the effort. We tried the Penetrating Clear Concrete and Masonry Water Repellent Sealer with Salt Guard and were very pleased; right after cleaning the surfaces, we used the SX5000, until it ran out. the difference between the treated and untreated area is amazing. I took some photos, but they don't do it justice! There is a wonderful sheen on the treated area, clean and almost like new again. I'm going to finish the job when the weather improves, but I can't imagine finding a better product for our walk. Its over ten years old now, but the sealer made it look great!

I repaired a small walkway at my mothers house and I did not use any sealer and after the winter it looked bad, pealing cracking. I added this to a portion of my patio and it looks good, From now on I will add this sealer to every time I repair concrete, its very rare but I don't like to redo anything. Very happy.

The sealer is easy to apply and is water repellent once dry, how long that will last stays to be seen. Once dry it is absolutely invisible. It's supposed to cover 100-200 square feet, on the website it even says 250 sqf, but if you have rough concrete pavers like I do then expect a coverage of about 50 square feet, maybe 60 but no more.