Internet #100000023

Model # 2005

Store SKU #944173

0073590956200

GAF

Cobra Exhaust Vent 10-1/2 in. x 20 ft. Mesh Roll Ridge Vent in Black

  • Ventilates to promote energy efficiency & guards against roof rot
  • Easy-to-install low-profile roll blends seamlessly at roof ridge
  • Shop the Lifetime Roofing System
$ 49 98 /roll
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  

Protect against leaks at the eaves, rakes and valleys with a quality leak barrier.

Resist moisture with a layer of synthetic deck protection between deck and the shingles.

Save time, and reduce the risk of blow off with factory-cut starter strip shingles.

Always read installation instructions.

Proper ventilation reduces damaging heat and moisture in the attic.

Enhance the home’s beauty and guard against leaks with matching hip and ridge cap shingles.
  

How big is my roof?

For a 1,500 sq. ft. home, buy 45 bundles.
For a 2,500 sq. ft. home, buy 75 bundles.
For a 3,500 sq. ft. home, buy 105 bundles.
  • Ventilates to promote energy efficiency & guards against roof rot
  • Easy-to-install low-profile roll blends seamlessly at roof ridge
  • Shop the Lifetime Roofing System
Help protect your roof from premature deterioration by providing effective attic exhaust ventilation. Effective attic ventilation is critical for a long-lasting roof. Cobra Exhaust Vent is a key part of the GAF Lifetime Roofing System and is backed by up to a Lifetime Limited Warranty when installed on lifetime shingle roofs.
  • Helps remove excess heat and moisture to protect your roof system from premature deterioration
  • 20 ft. Nail-gunnable roll with nails included for convenient installation
  • Low-profile, shingle-over design works with 12 in. wide ridge cap shingles
  • Helps promote your home's energy efficiency by reducing excessive heat in the attic
  • Perfect height nail system fits all major nail gun makes and models, making installation easy






Product Overview

  • Ventilates to promote energy efficiency & guards against roof rot
  • Easy-to-install low-profile roll blends seamlessly at roof ridge
  • Shop the Lifetime Roofing System
Model #: 2005
Sku #: 944173
Internet #: 100000023

Help protect your roof from premature deterioration by providing effective attic exhaust ventilation. Effective attic ventilation is critical for a long-lasting roof. Cobra Exhaust Vent is a key part of the GAF Lifetime Roofing System and is backed by up to a Lifetime Limited Warranty when installed on lifetime shingle roofs.

  • Helps remove excess heat and moisture to protect your roof system from premature deterioration
  • 20 ft. Nail-gunnable roll with nails included for convenient installation
  • Low-profile, shingle-over design works with 12 in. wide ridge cap shingles
  • Helps promote your home's energy efficiency by reducing excessive heat in the attic
  • Perfect height nail system fits all major nail gun makes and models, making installation easy






Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Brand Owens Corning Owens Corning GAF GAF
Name VentSure 11 in. x 240 in. RidgeCat Rolled Ridge Vent in Black VentSure 11 in. x 20 ft. Ridge Vent Rigid Roll with Weather PROtector Moisture Barrier Cobra Exhaust Vent 10-1/2 in. x 20 ft. Mesh Roll Ridge Vent in Black Cobra Rigid Vent 3 - 13-3/4 in. x 48 in. Roof Ridge Exhaust Vent in Black, Case
Price
$49.00 /roll
$49.98 /roll
$51.54 /roll
$93.31 /case
Ratings (10) (18) (54) (24)
Shape Rectangle Rectangle Rectangle Rectangle
View Product View Product View Product View Product

Specifications

Dimensions

Cut-Out Width (in.)
10.5 in
Net-Free Area (Sq. In.)
282
Product Depth (in.)
240
Product Height (in.)
0.63
Product Width (in.)
10.5

Details

Color Family
Black
Color/Finish Family
Black
Features
Weather Filter
Material
Plastic
Mounting Position
Roof Ridge
Paintable/Stainable
No
Power Type
Non-Powered
Product Weight (lb.)
6lb
Returnable
90-Day
Screen Included
Yes
Shape
Rectangle
UV Resistant
No
Vent Type
Ridge

Warranty / Certifications

Manufacturer Warranty
40 Year Limited Warranty

Specifications

Dimensions

Cut-Out Width (in.)
10.5 in
Net-Free Area (Sq. In.)
282
Product Depth (in.)
240
Product Height (in.)
0.63
Product Width (in.)
10.5

Details

Color Family
Black
Color/Finish Family
Black
Features
Weather Filter
Material
Plastic
Mounting Position
Roof Ridge
Paintable/Stainable
No
Power Type
Non-Powered
Product Weight (lb.)
6lb
Returnable
90-Day
Screen Included
Yes
Shape
Rectangle
UV Resistant
No
Vent Type
Ridge

Warranty / Certifications

Manufacturer Warranty
40 Year Limited Warranty

Questions & Answers

I've been watching the GAF installation videos and with the ridge cap shingle installation, you c...

I've been watching the GAF installation videos and with the ridge cap shingle installation, you can clearly see the installer nailing the cap shingles over the plastic ridge cap exhaust vents. I was originally planning on using just this mesh roll ridge vent. Do I need both the mesh and plastic vents?
Asked by: MattR
Hello, you would only need to select one or the other. You would not install both types of ridge vents. Please give our technical team a call at 1-800-ROOF-411 for further details. Thank you.
Answered by: GAFProductExpert
Date published: 2018-11-14

When I cut the ridge -- how wide -- how far from center down each side do I cut?

Ridge with plywood and tar paper over it. I will be cuttting plywood and tar paper -- how far down each side do I cut -- 4" , 5" 5.5" each side?
Asked by: CFR
If using a ridge board 1 inch on each side of the ridge board. Without a Ridge board 1 inch on either side of the Ridge
Answered by: George
Date published: 2017-09-20

can this be used on metal roof

can this be used on metal roof
Asked by: handyman
yes the way to go.
Answered by: Ronnie
Date published: 2018-01-23

Does it need to be installed the entire length of a ridge or can I stop above the fire wall above the kitchen/garage?

Asked by: Armdroid
Do not cut the hole in the ridge within 6" or over the fire wall or within 6" of the end of the roof or 12" within the end of a hip, install the material all the way across the ridge
Answered by: George
Date published: 2018-06-07
  • y_2019, m_7, d_23, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_, sid_100000023, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 58ms
  • QUESTIONS, PRODUCT

Customer Reviews

Cobra Exhaust Vent 10-1/2 in. x 20 ft. Mesh Roll Ridge Vent in Black is rated 4.1 out of 5 by 54.
Rated 5 out of 5 by from I needed a product to fit the ridge vent in... I needed a product to fit the ridge vent in a pole barn . So after finding this product on line I went to the store to look at it, it seemed to be what was needed so I purchased it and installed it . So far no problems, Fit and function is good..
Date published: 2019-07-09
Rated 4 out of 5 by from A better choice than what I had on the roof.... A better choice than what I had on the roof.
Date published: 2019-06-18
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2019-07-17
Rated 4 out of 5 by from Went on easy Went on easy
Date published: 2019-05-07
Rated 1 out of 5 by from Not enough ventilation Had to replace old style aluminum ridge due to bad original install(occasional leaks) . The cobra vent is easy to install, just make sure you use longer nails than the ones that come with it if not using a nail gun. Unfortunately, I noticed almost immediately that my 2nd level was hotter in the summer. Then after some very cold winter days, I went into the attic to find condensation everywhere. Never had this problem until I installed this vent. I think it is just too low profile and does not allow enough air flow. As soon as spring is here, I will replace this ridge vent with the "baffle" type that is supposed to be the best ridge vent now (especially for snow regions)
Date published: 2014-03-07
Rated 5 out of 5 by from GAF Ridge Vent This is an excellent product, I have used many different kinds of ridge vents in the past and the Cobra Ridge Vent is by far the easiest to work with not to mention how good it looks when the job is completed. I have just recently used this product on my own house and it just looks great.
Date published: 2009-09-28
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2019-02-07
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2019-02-05
  • y_2019, m_7, d_23, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_54
  • loc_, sid_100000023, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 30ms
  • REVIEWS, PRODUCT